Topics created by Blauenfeldt

Is it possible to have the MM streaming radio, and then go to a webbrowser on a pc typing in IP-of-MM:8080 and then hear the radio?

Never mind.
Found out, that I had to do startDate: "10/28/2020",

try to tunning /boot/config.txt in sudo mode.
you can boost HDMI signal and force it at boot

some command in terminal for RPI:

vcgencmd display_power

results:

display_power=0 -> screen off display_power=1 -> screen on

vcgencmd display_power 1
-> force screen on

vcgencmd display_power 0
-> force screen off

@Blauenfeldt no idea. as I said, I don’t use noobs because of all this extra setup I don’t want to learn

The typical smart mirror film is Gila mirror window film (https://www.amazon.com/Gila-Privacy-Adhesive-Residential-Control/dp/B000H5XTKG). I got mine from Lowes in the U.S. It is a lot cheaper than two-way glass, and the quality isn’t mind-boggling but it’s not bad either. I think it’s 30% transparent but you can check that through the link. I applied my film to acrylic and it worked well enough–I’d recommend it if you’re on a budget.

Any screen should work, as long as it’s well against the glass it should be fine.

As for the mirror glass, 70% reflective/30% passthrough seems to be the norm for “Smart mirror glass”… it goes by different names and such from manufacturers.

@Blauenfeldt yes, it is possible. But does not exist today. Someone will have to write more code to get all those features

It works like a charm now. Thank you very much.

@Blauenfeldt

Yes thats possible, you need to work with the classes as i wrote in the documentation.

{ module: 'clock', position: 'top_left', //Set your classes here seperated by a space. //Shown for all users classes: 'default everyone' }, { module: 'example_module2', position: 'top_left', //Only shown for name1 classes: 'thierry james' }, { module: 'example_module', position: 'top_right', //Only shown for name1 classes: 'james' }