Hello,

Is there a module which allows to use an infrared receiver + remote to for example send predefined notifications?

Hello,

Im trying Raspbian Desktop in VirtualBox to do some debugging faster.
Everything works so far except for the keyboar shortcuts.
When MM is in fullscreen no CTRL+q / CTRL+m / CTRL+SHIFT+i is working. Only ALT+space does work.
Tested it with hardware keyboard and VirtualBox’s screen keyboard.

Is there a setting or is it something with virtualbox?

@sdetweil
From that post about an hour. and it was supposed to trigger this morning around 6:30 am.
It did not and it did not leave anything in the logs since last night when I pm2 stop all then pm2 flush. around 8:30 pm .
So that means cron job did nothing with pm2 over night
I have been experimenting so there are a couple different job lines.
I really expected something in the log. But this is all I get.

pi@MM:~ $ pm2 logs --lines=100 [TAILING] Tailing last 100 lines for [all] processes (change the value with --lines option) /home/pi/.pm2/pm2.log last 100 lines: /home/pi/.pm2/logs/mm-out.log last 100 lines: /home/pi/.pm2/logs/mm-error.log last 100 lines:

My Crontab on 2 different MM setups. I get the same nothing on both.
Both are running Bookworm and MM 2.3.1

05 20 * * * pi /usr/local/bin/pm2 start mm 15 07 * * * pi pm2 start mm 30 21 * * * pi pm2 stop mm 05 20 * * * root /usr/local/bin/pm2 start mm 15 07 * * * root pm2 start mm 30 21 * * * root pm2 stop mm

I betcha if you lit her face better, she could use it for a makeup mirror. That’s where the darkness comes in, from the reflections being reduced to allow for shine through. See what happens with a light ring behind the mirror, and if it works, you can add lighting to the frame so to highlight faces and provide a good makeup mirror. :)

Hi,

Does it make sense to create a cronjob which

stops MM turns off wifi turns off xyz
from for example 12pm to 6am?

Will this reduce the power consumption effectively?

Thx

@mumblebaj thanks. makin progress…

@sdetweil

Testing my post capabilities. :-)

@matze86 do this

from the MMM-Navigate folder

npm rebuild epoll --update-binary

worked for me

note that this compiled version won’t work if you use electron now…

@keineAhnung123 My pleasure.