Dear guys,
I am finally done with my first MM2- project.
Thank you very much for your great support and ideas to finish this project.

There are only a few things left to work on:

• fix some errors with the DHT22-sensor
• find a GitHub module which shows the whole month with every iCal-entry. Also find the right positioning for it. I would like to position it in the Top/middle space (not top_bar, Ive tried it already :D ).
• enable wifi-connection. This hunts me since several months :D I still have no clue where the error is and how to fix it.
• find a Github module which enables me to send push -up notifications to the mirror. e.g. a friend goes into my room, looks a the running mirror and the mirror says something like "Hello XY, my name is Henry. It’s nice to meet you, you fag :D )

Best regards, Paul
You will find attached to this topic a few pictures.

Here is the final positioning :)

Dear fellow MM-builders,
I would like to show you the build to my second MagicMirror.
Unfortunately the glas broke during a move to another city, so I decided that it was time for a second try.

This time I used following parts:

• picture frame Ribba from IKEA 50cm*70cm
  –> it includes a neat passepartout which was useful to hide some of the cracks in the mirror
  -24" monitor Acer KA241bid
  –> a cheap monitor which is also very thin and has a HDMI output

• then I 've cut some of the parts of my old mirror which weren’t cracked
  –> I used a glas cutting tool and watched a lot of DIY youtube videos on how to cut glas, because I not such a craftsman :-D

• If you want a more cheap solution instead of buying an actual mirror, you can use the Polycarbonat plat which is included in the Ribba frame from IKEA and use silver reflection folie

• a short HDMI cable

• for wifi connection I used the CSL - 300 Mbit/s USB 2.0 WLAN
  –> you just have to install the software from CSL (raspberry Pi needs a LAN connection) after that its super easy :)

• a wall mount

• wood from the local store as well as screws

• male to female wires

• a DHT22-Sensor as well as a PIR sensor

I was a lot of fun putting it all together and doing a little bit of programming by myself.
As always, you guys helped me a lot in doing so!

Thank you very much :)

Hello Guys,
thanks to your awesome help, I was able to complete the my first step of installing and running the MM without problems on my TV.
Thanks so much! :)
This made my day :D I am completely happy.
The next steps are building the frame and ordering the mirror.

Many greetings from Germany :)

Paul

@cruunnerr,

Thank you so much! What a great ‘How-to’- Guide :)

You and your post helped a lot. :)

@strawberry-3.141 hope you will get an awesome topic :)
Good luck. I ve just finished my bachelor thesis 😄

Dear @iwaldrum ,
this is such a cool set-up. Well done! :)

@strawberry-3-141 @Jopyth Thank you very much for your help.

My error was following one:

“https://192.168 …”

Now, I ve fixed it in “http://192.168 …”

–> It’s the small things that matter, I guess :D

Thanks a lot.
@Jopyth I love it :-) Well done!

Bayreuth, Germany

@cpramhofer I did everything from the scratch :-D

1. Reformation the SD Card
2. Copying the Software to the SD Card.
3. Installing everything
4. Installing the MM2 Software via the link on Michaels website

–> Conclusion: No no problem more :D