Topics created by robiv8

@robiv8 only see in the output of npm start

in config.js all are running unless they have

disabled: true,

as an option after their

module: name

line

dear @sdetweil

Thank you very much.
It worked like a charm.

I wish you happy Easter

@karsten13
Thanks, i installed the emoji fonts.
Now are in Black&White.

@robiv8 see this
https://forum.magicmirror.builders/topic/14862/help-with-a-couple-css-issues?_=1668635720813

@sdetweil
OK Thanks for the tip

@sdetweil

Ups, sorry for the mistake! sdetweil instead of jopyth :-)

And … Great work. Thank you.

pi@InfoTerminal:~/MagicMirror/modules $ git clone https://github.com/sdetweil/MMM-Buttons.git
Klone nach ‘MMM-Buttons’ …
remote: Enumerating objects: 56, done.
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 56 (delta 0), reused 2 (delta 0), pack-reused 52
Entpacke Objekte: 100% (56/56), Fertig.
pi@InfoTerminal:~/MagicMirror/modules $ cd MMM-Buttons/
pi@InfoTerminal:~/MagicMirror/modules/MMM-Buttons $ npm install

Magic-Mirror-Module-Buttons@1.0.0 postinstall
./postinstall

/home/pi/MagicMirror/modules/MMM-Buttons
⠴ Building module: epoll, Completed: 0make: Verzeichnis „/home/pi/MagicMirror/modules/MMM-Buttons/node_modules/epoll/build“ wird betreten
CXX(target) Release/obj.target/epoll/src/epoll.o
⠋ Building module: epoll, Completed: 0 SOLINK_MODULE(target) Release/obj.target/epoll.node
⠼ Building module: epoll, Completed: 0 COPY Release/epoll.node
make: Verzeichnis „/home/pi/MagicMirror/modules/MMM-Buttons/node_modules/epoll/build“ wird verlassen
✔ Rebuild Complete

added 6 packages, and audited 7 packages in 5m

found 0 vulnerabilities
pi@InfoTerminal:~/MagicMirror/modules/MMM-Buttons $

try

float: left;

in the custom.css for the one module you would like to Change

The config.js seems to be OK
My MM works fine with pm2 start mm,
I just wanted to test it in server mode. And that’s just what it looks like!

@robiv8 said in a question about MMM-Remote-Control:

How I initialized?

Short answer: If you restart the Mirror (from command line, computer, or remote), make sure you refresh the remote page after the Mirror loads, if you have the remote open on a different device.

Long answer: For some functions to work properly, an instance of the MagicMirror page must be loaded first because the remote queries it for information and uses it to perform actions on other modules. The main page must be loaded before the remote page; or the remote page refreshed if the Mirror is restarted. This should usually be the case if you use the Mirror on a screen directly attached to the server (RPi). If you use a web browser on a different computer, open/refresh http://magicmirror:8080 first in another tab, before reloading http://magicmirror:8080/remote.html.

I have a file named Core in the MagicMirror folder. This is about 443Mb in size. I did not notice it before.
What’s it all about. Is that correct!

Hallo,
gestern so ca. gegen 16:00 - 19:00 Uhr hatte ich ständig Probleme mit den Seiten hier.
Es kam ständig die Meldung das meine Internetverbindung anscheinend gestört wäre und der Inhalt des Forums war nicht aufrufbar.
Lustig das ich im Internet bin, die Seite forum.magicmirror.builders aufrufen kann und sich alles aufbaut und dann die Meldung kam.
Andere Seiten liefen wunderbar.
Ist der Fehler bei MM bekannt?
Dann sollte man die Meldung ändern weil Sie dem user suggeriert das es an ihm liegt.

Werde ich gleich morgen Nachmittag testen, das wäre ja der große Knaller.
Danke fürs recherchieren.
Ich werde auf jedenfall Rückmelden.

Will I test the same tomorrow afternoon, that would be the big bang.
Thanks for researching.
I will definitely confirm.

Wohoo Great!
I will try it tomorrow.
Many Thanks

Thanks, yes I understand that is missing a config. But where must this be and how looks the code.

I have 6 Push buttons installed :-)
0_1546684137698_IMG_2664 (1).jpg

OK it was the pin!
The correct PIN number is really impossible ;-)

But it is very confusing with pin BCM and BOARD
So the BOARD PIN is correct.

@tomy38 and @robiv8
You can add a local html-file via MM-SmartWebDisplay at the screen as I described here:
Link Text

Inside the Iframe-tag add a link to your PDF. For more info google for “PDF in HTML einbinden”.

Viele Grüße
Thomas

@el97 said in deinstall module?:

Remove the MMM-Remote-Control directory in the modules directory and that should be it.

Thanks

Oh Super Danke Vielmals

@robiv8

My question is how you got more than one to show side-by-side?
Can this be done with 2 different modules?