When I try to create an access token I am met with a blank page on the todoist (see images attached) i was just wondering if any of you experienced similar issues [image: jagXc1O]

@kvicksson can u mark your issue resolved?

@sdetweil I will try a new token…thanks Sam

Can also be done with mmm-syslog if you don’t need all the bells and whistles of the remote control module. And if you are using the Hubitat Elevation it’s basically the same. but you don’t need custom device handlers. It’s all built in to Hubitat (virtual device, button and then rules to send http get).

pm2 logs Failed to create permanent mapping for memfd region with ID = 207878710 0|mm | Failed to regester memfd mempool. Reason: could not attach memfd SHM ID to pipe 0|mm | mmap() failed: Cannot allocate memory 0|mm | Failed to create permanent mapping for memfd region with ID = 1648210477 0|mm | mmap() failed: Cannot allocate memory 0|mm | Failed to create permanent mapping for memfd region with ID = 1088771516 0|mm | Ignoring received block reference with non-registered memfd ID = 1088771516 0|mm | mmap() failed: Cannot allocate memory 0|mm | Failed to create permanent mapping for memfd region with ID = 3067665855 0|mm | Failed to regester memfd mempool. Reason: could not attach memfd SHM ID to pipe 0|mm | mmap() failed: Cannot allocate memory 0|mm | Failed to create permanent mapping for memfd region with ID = 1648210477 0|mm | mmap() failed: Cannot allocate memory 0|mm | Failed to create permanent mapping for memfd region with ID = 3337011850 0|mm | Ignoring received block reference with non-registered memfd ID = 3337011850

I found the issue was a conflict between MMM-RTSPstream and the Google Traffic maps module as reported here: https://github.com/shbatm/MMM-RTSPStream/issues/33 I haven’t had a chance to try the fix, have just disabled the maps module for now. However, the video is now displaying. Now if I can just get those 12 hours back used I OCD’ing over this. :-)

I assume you’re talking about the black border around the display, it’s usually caused by the overscan setting being on… https://www.techcoil.com/blog/how-to-make-your-raspberry-pi-fill-up-your-entire-monitor-screen-by-disabling-overscan-in-raspbian-stretch/

I am having trouble with the excludedEvents parameter in the calendar module. I can get some words to filter but not others. For instance I if I have the following two events on the calendar: School Early Dismissal Roger’s Special - Art If I enter ‘Early’ in the excludedEvents array then as expected the School Early Dismissal goes away. If I enter ‘Roger’ or ‘Art’ or ‘Special’ then I can’t get the second event to filter out. I have 3 calendars. I tried eliminating all but the one that pulls the “Roger’s Special - Art” event and still no luck. I am starting to think that there is something about that calendar ics that prevents events from being filtered? Is this possible? module: "calendar", header: "Calendar", position: "top_left", config: { maxTitleLength: "30", timeFormat: "absolute", nextDaysRelative: true, titleReplace: {'SPECIAL MEETING':'meeting'}, displaySymbol: false, //maximumNumberOfDays: "62", fade: false, excludedEvents: ['Special'], calendars: [ { // symbol: "calendar-check-o ", url: "webcal://www.calendarlabs.com/templates/ical/US-Holidays.ics", maxTitleLength: "17" },

It was a memory issue, but watchdog did not solve it. my swap space of 100MB ran full within an hour or so, so i made it bigger to 150MB. The MM ran for a week, and it froze again… Made the swap space 2 GB ( twice the memory size of my Pi 3B), and it did not crash or freeze since i made that adjustment. swapfile is around 220 MB at this moment, so 2 GB is a little overkill i guess The pi does a scheduled reboot every morning. (As it has always done)

@micksel ok, run pm2 stop 0 then cd ~/MagicMirror npm start now you might see the full errors

https://github.com/ianperrin/MMM-ModuleScheduler seems to do exactly this. Haven’t tested it myself though.

@Sean Thanks to you, I’ve solved the problem.

@otto said in I am givning up.. new install: cannot load mixer controls: Ogiltigt argument Did you tried the command I gave you? Thoses a just to validate that your mic is working, after you can work on alsamixer. The basic command are great tools to make sure stuff is working as you want. Maybe a long shot but did you tried the following solution provided here? https://askubuntu.com/questions/765396/alsamixer-cannot-open-mixer-invalid-argument It seems alsamixer can be tricky to config and some files need to be created manually (sound is muted by default at install).

@ooom416354 Hi, yes it’s possible but you would have to define the size for the module for it to contain the text. (Otherwise it just fills the available space in the bottom_left region) so in the custom.css add something like this : .MMM_modulename { width : 400px; } Replace the “MMM_modulename” with the name of the module and adjust the width accordingly.

Had the same problem, change directory to MagicMirror and execute npm start. Hope it help

Hello, I’m very new to magic mirrors, and so maybe my issue is obvious, and in that case I’m sorry. I’m trying to use the mmm-reddit module to pull from just one subreddit, but it’ll only work for me, if I set it to multiple subreddits. Here’s the setup that doesn’t work for me: { module: "MMM-Reddit", position: "top_right", config: { subreddit: ["showerthoughts"], showHeader: false, headerType: "sentence", displayType: "headlines", count: 4, show: 4, width: 360, showRank: false, showScore: false, showSubreddit: false, showNumComments: false, colorText: false, showThumbnail: false, showGilded: false, } }, Here’s the setup that does work for me: { module: "MMM-Reddit", position: "top_right", config: { subreddit: ["NintendoSwitch", "Showerthoughts", "Denmark"], showHeader: false, headerType: "sentence", displayType: "headlines", count: 4, show: 4, width: 360, showRank: false, showScore: false, showSubreddit: false, showNumComments: false, colorText: false, showThumbnail: false, showGilded: false, } }, Any good suggestions? I’m kind of lost 😕. Thank you very much!

I’ve added a feature request to GitHub here.

@sdetweil are u in the MagicMirror folder when u issue git pull? Try my update script here https://forum.magicmirror.builders/topic/10859/new-update-upgrade-script-ready-for-testing?page=1

Hey all, new user here. I just installed everything according on my pi3 to the handy guides, using the automatic installer. However my MM lags whenever there’s a big animation like the compliment changing or the news feed updating. Using task manager it seems my electron cpu usage is around 35 percent at rest and over 100 percent during a transition. Any thoughts on this? What information do I need to supply to help identify the problem?