First start from the mirror does not work

samydp

Hello I got the raspberry pi to 1000 times reinstalled and it’s nothing ! only MagicMirror v1 goes without problems ! In V2 the screen remains in black start even though I have the config edit : /

KirAsh4

If the process starts, but it stays black, there may be an error in your config which is getting it stuck. Have you looked at the console output or the log output for any messages?

samydp

so i tell you what I’ve done everything :
MM V1

Format card
Install Raspbian
Apache server and PHP5 Install
Install Chomium browser
Chomium browser Kisos - mode and autostart (sudo nano .config/lxsession/LXDE pi/autostart)
Raspberry Update
MM v1 copied to /var/www/html
Change config
finished

MM V2

MM v1 Clear
Install node
MM clone (git clone https://github.com/MichMich/MagicMirror)
Navigate to folder (cd /home/pi/Magic Mirror)
npm install && npm start
Error
npm log

what can I do now ?

Note from admin: Please use Markdown on shell commands so they are easier to read!

KirAsh4

I think we have to get @MichMich or @paviro in on this. I don’t know Electron enough to know why it’s failing.

paviro

I hate those node error outputs… 😔 it could be that one of your module helpers fails to start. Have you installed any modules?

samydp

can you tell me what all modules I exactly need. ? I make every time you install an update

paviro

@samydp you do not need any modules. Did you add anything to the modules folder?

samydp

I have not in the folder modules I 've added the left so !
I can make it wenistens indicating to me and does not remain black : O

mochman

@samydp I had this problem when I first installed it. It was a module problem for me. Can you comment out all of the modules from config.js except alert and see if if gives you the same error. If not, start enabling the modules one by one until you figure out which is the problem.

-Luke

samydp

how exactly do you mean? !
I would now delete all modules except the komentare . or how to do it ?
and thank you !!!