MMM-NetworkScanner

[binderth]

@bminer1 yes, this is nice! would be killer, if it were to be configured per device! ;) it seems from the way in the config, it was intended to fire regardless of which device leaves or comes up again…

[bminer1]

@binderth When i read through the Read ME, it says that the Residence determines when to turn on and off. I want this to work for me so then i can put my wifes phone in there as a resident and that way, when both of us leave, it shuts off. when one of us is home, it stays on.

[binderth]

@bminer1 ah. ok, I get it (didn’t have “residents” in my config either). So, this one is realy “every resident is offline”: i do something. “At least one resident is online again”: i do something. So this would then be a generic presence detection.

Would be cool, if it could also be bound to specific residents. So I can have Actions regarding on them also.

[bminer1]

@binderth I think you are on a right track. We just need to debug the “simple” task of turning on and off and then the fun can begin with other stuff.

[ianperrin]

@bminer1, @pugsly, @Speedy-one

I’m still working through the issues introduced last weeekend, but have just added a commitwhich attempts to resolve the duplicate devices issue. I’d be grateful if you could try it out and confirm.

[ianperrin]

@derek7467

If you can provide the arp-scan command for this, an option could be added to support it - once the current issues are fixed of course ;)

Cc @bluedoors

[ianperrin]

@bminer1, @binderth

I’m going to be taking a look at the notifications functionally after the issues with the current release have been resolved.

[Blackmirror]

Nice to make a output gpio in this module, so I can installed a relais, to switch thinks on, only when I am in the house.

[zdenek]

I’ve also issue - “resident” doesn’t work for me:

and here ic config:

	       {
      		module: 'MMM-NetworkScanner',
        	position: 'bottom_right', 
        	config: {
            		devices: [
	                    	{ macAddress: "ab:ab:ab:ab:ab:ab", name: "Mobile", icon: "server"},
                	],
            		showUnknown: false,
			debug: false,
            		showOffline: true,
            		keepAlive: 60,
            		updateInterval: 30,
            		residents: "Mobile",
			showLastSeen: true,
 	                occupiedCMD: {notification: 'REMOTE_ACTION', payload: {action: 'MONITORON'}},
            		vacantCMD  : {notification: 'REMOTE_ACTION', payload: {action: 'MONITOROFF'}},
 			}        
    	      },

any idea? module get started, Icon and name appers, but it’s still “grey” (like offline - wifi is on, I can see Raspberry and also Server on the same network via Fing)
Tried also with IP - the same. Tried another device, the same. And arp-scan --localnet I can see the devices I want to monitor

thanks for help
Zdeněk

[Mykle1]

@zdenek said in MMM-NetworkScanner:

any idea?

you could use an earlier version that does work until this one gets fixed