MMM-NOAA - Another Weather Module

[barnosch]

Just a little issue:
Someone else facing this problem with the missing today highest temperature?
Was in the old version the same.
Makes no sense for me, since this runs in a loop, and the other stuff is showed correctly.

Any ideas?

[tbbear]

looks good now only the wind is missing

[barnosch]

… the next day it was working correctly again… weird

[Mykle1]

@barnosch said in MMM-NOAA - Another Weather Module:

… the next day it was working correctly again… weird

It’s quite possible that the data from the API was missing yesterday. I’ve seen this a few times in other modules.

[tbbear]

@Mykle1 said in MMM-NOAA - Another Weather Module:

@barnosch said in MMM-NOAA - Another Weather Module:

… the next day it was working correctly again… weird

It’s quite possible that the data from the API was missing yesterday. I’ve seen this a few times in other modules.

was the same here

[cowboysdude]

MAJOR UPDATE

1. Fixed ALL console errors.
2. Style enhancements
3. Weather ALERTS - it will show under the forecast if there’s a weather alert.

Download:

[card:cowboysdude/MMM-NOAA]

[cowboysdude]

@barnosch Yes that would be missing data from the api ;)

[barnosch]

holy crap.
Please stop the continous improvements!

just a little hint if you want to have the weather right on the border (only if it is located on top_right)
change the MMM-NOAA.css to this

.MMM-NOAA {
	width: 240px;  /* was 230px, but it breakes the line then */
	margin-right: 0px;
	margin-left: 60px; /* new */
}

then it should go to the most right.

@cowboysdude the blinking is too much for me (already commented out in the css), but the rest is nice as always
I guess you have found a new friend: … CSS ;) rofl

[cowboysdude]

Thanks @barnosch … This one wasn’t an improvement as much as just fixing all the errors 3 to be exact…ALL FIXED :)

You don’t like the flashing? Come on mannnnnnnnn I think it’s cool but actually I only meant to use it in mine… but I was tired when I uploaded the files and used the wrong css file LOL

Thanks for the CSS tip but no… me and CSS are not friends hahahhahaha

[cowboysdude]

PS changed the css file on github to take out the flashing stuff… :) Well really didn’t take it out… it’s just a config option… if you don’t want it then just leave out of the config because the default is set to false. :)

[cowboysdude]

@barnosch said in MMM-NOAA - Another Weather Module:

width: 240px; /* was 230px, but it breakes the line then /
margin-right: 0px;
margin-left: 60px; / new */

PERFECT!! Thank you! [on dev machine I had to set width at 290]

[cowboysdude]

LANGUAGE UPDATE

Thank you to @kurtern84 for adding the Norwegian language!!!

** Only need to update if you need!! **

Download:

[card:cowboysdude/MMM-NOAA]

[nobita]

@cowboysdude Problem after install this module
when finish install my display only show " GATHERING WEATHER STUFF" on monitor
What happen and How to solve it,Thanks for your kind

[tbbear]

@nobita said in MMM-NOAA - Another Weather Module:

@cowboysdude Problem after install this module
when finish install my display only show " GATHERING WEATHER STUFF" on monitor
What happen and How to solve it,Thanks for your kind

Please double check ur 2 diff. apikeys, this normaly happens when their is an error in the NOAA config

[nobita]

@tbbear said in MMM-NOAA - Another Weather Module:

Please double check ur 2 diff. apikeys
What does it means ,I don’t understand. give me for detail,Thanks for your answer

[tbbear]

@nobita said in MMM-NOAA - Another Weather Module:

@tbbear said in MMM-NOAA - Another Weather Module:

Please double check ur 2 diff. apikeys
What does it means ,I don’t understand. give me for detail,Thanks for your answer

Ok, so u can enter 2 api keys one is the key from wundermap and the other is the airkey if u are using this so in read.me u can find where u can get the keys

[Nystro0m]

@nobita As tbear said. Also make sure your PWK is set corect.

This is the part of the config we are talking about:

	apiKey: "YOUR API KEY",    // https://www.wunderground.com/weather/api  select the middle plan... 
	useAir: false,             // set to false if you do not want to use Air Quality Index
	airKey: "YOUR API KEY",    // IF you want Air Quality Index
	pws: "KNYELMIR13",         // go here to find your pws: https://www.wunderground.com/wundermap

You dont need the airKey if you have it set to false. You only need this if you want the Air-data.

[nobita]

@Nystro0m and @tbbear Thanks for your help,it work . I delete first line in config (disabled: false,)
Thanks

[nobita]

@cowboysdude I have three questions

1. How to Adjust font size and color in this border photo
   

2. If I would like don’t display or show some line such as hPa , Amount of Daylight
   how to do?
   3 What is hPa?

Thanks for your all kind

[tbbear]

@nobita i can answer ur questions:

1. u can change font and color in a .css file, but this is own programming
2. u can configure a lot of features (check read.me) but some makes the style of a module so its part of internal programming
3. hPa = hectoPascal this is the normal european unit for Airpressure