MMM-aviationwx (Aviation weather)

Mykle1

@stephenmelody said in MMM-aviationwx (Aviation weather):

10 degrees C temperature / -1 degrees C dew point (time of report)

You would like that the same? Delete or move Altimeter?

Mykle1

@cowboysdude said in MMM-aviationwx (Aviation weather):

Red and pink LOL

Hot pink? :-)

stephenmelody

the format on that image is:

Wind direction @ wind speed: 220@05kt
Visibility: 10SM 10 statute miles
Sky Coverage: OVC - overcast, BKN - broken etc…
Cloud base: 150(00)ft
Temp: 10 degrees C
Dewpoint: -1 degrees C
Time of the report in 24 hour clock: 20:51

I’d say (personal opinion) that the pressure/altimeter setting isn’t that important. I’d prefer to keep the additional information, if you look at FDY and TBR above, they have:

-RA which is showers of rain
BR - which is fog (or haze, I can’t remember… 70% sure it’s fog, either way you can’t see through it well)

That to me is more important that the altimeter setting.

I can look for other examples if that would help?

Mykle1

@stephenmelody said in MMM-aviationwx (Aviation weather):

I can look for other examples if that would help?

Nope, that’s good for now

Mykle1

@stephenmelody

How would I denote visibility if this is the data ?

Visibility:1500

Simply 1500? v1500? vis? other?

stephenmelody

Do you have an example airport you’re getting that from? Is it outside of the US where viz is usually XXSM?

Mykle1

@stephenmelody

https://avwx.rest/api/metar/uudd

EDIT> My bad, that’s miles

Mykle1

@stephenmelody said in MMM-aviationwx (Aviation weather):

Is it outside of the US where viz is usually XXSM?

I thought that was the whole idea for this module, that it would be international, yes?

stephenmelody

Russian Viz is in metres, so they’d want to see 1500m I’m guessing.

That’s the problem, you’re creating the ability to call weather from international airports but each country / region reports differently. The good thing with AVWX is it tells you the unit to use, so you could just append after the value the unit identifier, so in your example you have:

 "Visibility": "9999",

and in the units section:

"Visibility": "m",

so you could concatenate it to be:

visibility: 9999m

Does that make sense? Have I answered the question?

stephenmelody

The three main differences I know of are:

USA reports altimeter in inHg, rest of the world is hPa (or mb, which is the same thing).

USA Reports viz in Statute Miles, rest of the world in Kilometers

Russia reports wind speeds in Metres/Second, rest of the world in Knots. (they also report altitude in meters above the ground and the rest of the world uses feet above the ground (or sea level, that also depends…)

That’s when flying becomes fun, so in the UK, you fly at an altitude in feet, a speed in knots (nautical miles per hour) and with a visibility in kilometers… talk about mixing up units!!!