Magic mirror Pi3 + Windows 7 1.60m x 0.60m

[Chris]

Hello,

First of all, I want to thank all the contributors of this forum without whom I could not have created my mirror.

It has been about three months since I attended this forum silently to finally be able to present you my work.

I wanted to make a mirror to put it in my living room above a buffet.

The buffet being very long, it was necessary to create a mirror imposing enough to dress the wall.

So I left on dimensions of 1.60 meters by 0.60 meter.

This allowed me to go through a 32-inch screen.

having a home containing a lot of home automation (blinds, lights, heating, cameras, …) I wanted to be able to order some of my equipment thanks to the mirror.

So I started to install magic mirror on a raspberry pi 3. I started to have problems with the display of the cameras on magic mirror. Even with a 32-inch screen, there is a moment when all the modules you want to put have no place to display.

So, as I had room, I told myself that I could add a separate 19-inch screen for the cameras, on a Windows computer that I used to PVR.

so I insert in the mirror:

1 raspberry 3 for magic mirror
1 32-inch screen for the magic mirror

1 acer veriton under windows 7 for cameras
1 19-inch screen for cameras.

I started by mounting the frame. I wanted the mirror glass to be directly glued to the chassis with a 5 cm deflection to hide all the switches.

In addition, it was necessary that the 5 cm of the mirror is opaque because I wanted to put an LED strip for the light. so I had a special primer for car windshields.

For the mirror, I’m lucky to have a friend who works in a factory. So I could have a 6mm laminated glass spy mirror of 1.60 * 0.60 at a very good price.

I stuck the mirror on the chassis with windshield glue.
 
after all these explanations, place some photos:

I added to magic mirror the OPENJARVIS solution for voice control.

I plugged a rf 433 module on the ft and I can ask the mirror to turn on the lights, to open the shutters.

With jarvis I can have the weather, the radio, the way … to the voice. I think it’s a good complement for magic mirror.

I installed the following modules:

[Remote-Control] Shutdown, Configure and Update your MagicMirror
Calendar Monthly
Calendar
My commute (x3)
Soccer live score
Soccer
World
Clock
Suncalc
Wunderground,
Newsfeed,
Snow

I failed to install the following modules:

MMM-NOAA - Another Weather Module (each indicates standby but no info appears)
MMM-Jarvis-Voice-Control (the microphone does not appear on the magic mirror interface)

Here…

I hope I have not been too long in the presentation.

Hoping that in my turn I can help forum members as you have helped me a lot.

PS: Sorry for the translation … Google translate is my friend;)

[Peter]

Very impressive!
Nice job!
Peter

[Mykle1]

@Chris

I dig it man! I really enjoy the story and the pictures. You’ve done an excellent job. Congratulations! :-)

[cruunnerr]

looks really really nice. Well done! :D

Did you really just glued the mirror? i would be scared that the glass will fall…
Anyhow it looks great !

[Chris]

@Peter said in Magic mirror Pi3 + Windows 7 1.60m x 0.60m:

Very impressive!
Nice job!
Peter

@Mykle1 said in Magic mirror Pi3 + Windows 7 1.60m x 0.60m:

@Chris

I dig it man! I really enjoy the story and the pictures. You’ve done an excellent job. Congratulations! :-)

Hello,

Thank you for the compliments.

@cruunnerr said in Magic mirror Pi3 + Windows 7 1.60m x 0.60m:

looks really really nice. Well done! :D

Did you really just glued the mirror? i would be scared that the glass will fall…
Anyhow it looks great !

In fact, I glued the ice on the wooden frame using glue for automobile windshields.

For fixing to the wall, it is fixed thanks to specific fixing brackets.

Normally he should not move :)

[enettekoven]

This. Is. Awesome!

My jaw still hurts from when it fell to the ground of amazement :-O

[strawberry 3.141]

Wow this is looking awesome, one of the best I have seen so far.

[cowboysdude]

WOW very nice job!!! I don’t recall seeing you asking questions in the NOAA weather module forum…

[Chris]

@enettekoven said in Magic mirror Pi3 + Windows 7 1.60m x 0.60m:

This. Is. Awesome!

My jaw still hurts from when it fell to the ground of amazement :-O

@strawberry-3.141 said in Magic mirror Pi3 + Windows 7 1.60m x 0.60m:

Wow this is looking awesome, one of the best I have seen so far.

Hello,

Thank you very much for the compliments.

@cowboysdude said in Magic mirror Pi3 + Windows 7 1.60m x 0.60m:

WOW very nice job!!! I don’t recall seeing you asking questions in the NOAA weather module forum…

In fact, I did not ask any questions on the subject. I tried by myself by reading all the posts.

However, I do not admit to being defeated … I was going to try to make it work again today.
I’ll go over the right topic to share the results.

Regards,

[hayman]

@Chris said in Magic mirror Pi3 + Windows 7 1.60m x 0.60m:

o over the right topic to share

very nice work…

is the Jarvis working know … ?

[Chris]

@hayman

Hello,
thanks for the compliment

Do you want to talk about the open-jarvis solution or the MMM-Jarvis-Voice-Control module?

For open-jarvis, it works very well and there are many plug-ins available.
By cons, I did not try to reinstall MMM-Jarvis-Voice-Control.

I am fighting with MMM-Assistant right now … :s

[schlachtkreuzer6]

Wooooooow! That one is really stunning :) congratulations, bravo, super!

Two question, what glue do you use? Brand or shop? And what did you use to cover the outer glass (leds)?

[Chris]

@schlachtkreuzer6

@schlachtkreuzer6 said in Magic mirror Pi3 + Windows 7 1.60m x 0.60m:

Wooooooow! That one is really stunning :) congratulations, bravo, super!

Hello,
Thank you for the compliments,

@schlachtkreuzer6 said in Magic mirror Pi3 + Windows 7 1.60m x 0.60m:

what glue do you use?

3M glue with car windshield ref. 08603

@schlachtkreuzer6 said in Magic mirror Pi3 + Windows 7 1.60m x 0.60m:

And what did you use to cover the outer glass (leds)?!

3M hanging primer ref. 58012

For the frame, medium-type wood.
The thickness of the chassis depends on the size of the mirror,

cordially

[schlachtkreuzer6]

@Chris
Thanks for the detailed info!