Read the statement by Michael Teeuw here.
Update Error of v.2.2.0 :(
-
@fox Did you try reinstalling electron via the instructions given? ie, delete
/home/pi/MagicMirror/node_modules/electronand reinstalling?This should be close:
cd /home/pi/MagicMirror/node_modules sudo rm -rf electron cd .. npm install electron@1.4.15After that, I suspect a
npm installand thennpm start. -
@bhepler
thank you for your reply.
Everything worked until the last command.
Then i gotpi@magicpi:~/MagicMirror $ npm build && npm start > magicmirror@2.2.2 start /home/pi/MagicMirror > sh run-start.sh Starting MagicMirror: v2.2.2 Loading config ... Loading module helpers ... Initializing new module helper ... Module helper loaded: MMM-cryptocurrency Initializing new module helper ... Module helper loaded: MMM-Wunderlist No helper found for module: clock. Initializing new module helper ... Module helper loaded: MMM-ModuleScheduler WARNING! Could not load config file. Starting with default configuration. Error found: Error: Module version mismatch. Expected 50, got 54. Loading module helpers ... Initializing new module helper ... Module helper loaded: MMM-cryptocurrency Initializing new module helper ... Module helper loaded: MMM-Wunderlist No helper found for module: clock. Initializing new module helper ... Module helper loaded: MMM-ModuleScheduler App threw an error during load Error: Module version mismatch. Expected 50, got 54. at Error (native) at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:173:20) at Object.Module._extensions..node (module.js:583:18) at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:173:20) at Module.load (module.js:473:32) at tryModuleLoad (module.js:432:12) at Function.Module._load (module.js:424:3) at Module.require (module.js:483:17) at require (internal/module.js:20:19) at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindin gs/bindings.js:76:44) Whoops! There was an uncaught exception... Error: Module version mismatch. Expected 50, got 54. at Error (native) at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:173:20) at Object.Module._extensions..node (module.js:583:18) at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:173:20) at Module.load (module.js:473:32) at tryModuleLoad (module.js:432:12) at Function.Module._load (module.js:424:3) at Module.require (module.js:483:17) at require (internal/module.js:20:19) at bindings (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/bindin gs/bindings.js:76:44) MagicMirror will not quit, but it might be a good idea to check why this happene d. Maybe no internet connection? If you think this really is an issue, please open an issue on GitHub: https://gi thub.com/MichMich/MagicMirror/issues Launching application.But it does not start.
I did also
pi@magicpi:~/MagicMirror $ npm list | grep electron ├─┬ electron@1.4.15 │ ├─┬ electron-download@3.3.0 │ ├─┬ electron-chromedriver@1.7.1 │ │ └─┬ electron-download@4.1.0 │ │ │ └─┬ electron-to-chromium@1.3.30 │ │ │ └── electron-releases@2.1.0 pi@magicpi:~/MagicMirror $ npm rebuild --runtime=electron --target=1.4.15 --disturl=https://atom.io/download/atom-shell --abi=50 -
This thread should help: https://forum.magicmirror.builders/post/7634
-
@bhepler
I tried the commands of the thread it, but no effect… Any help ? -
Hi,
Same problem here. After yesterday’s update (git hub && npm install) two modules (MMM-PIR and MMM-MyCommute) has wrong version (except 50, got 48). After launching screen is just black. I’ve tried to update electron (npm rebuild --runtime=electron --target=1.4.15 --disturl=https://atom.io/download/atom-shell --abi=50)but nothing changed. How to start it?
-
@hoddog Here is my result: https://forum.magicmirror.builders/post/33238
-
Should I wait for new update or install everything from beginning?
-
What you could try:
- backup your module folder.
- backup your config file
- remove MagicMirror
- reinstall
- put modules & config back.
-
So i’ve used solution from here:
https://forum.magicmirror.builders/topic/6045/black-screen-after-install-update-v2-2?page=1
For my not working modules.
And it works. Mirror started… Huuuh.
Thank you mr ryck! -
@hoddog said in Update Error of v.2.2.0 :(:
Hi,
Same problem here. After yesterday’s update (git hub && npm install) two modules (MMM-PIR and MMM-MyCommute) has wrong version (except 50, got 48). After launching screen is just black. I’ve tried to update electron (npm rebuild --runtime=electron --target=1.4.15 --disturl=https://atom.io/download/atom-shell --abi=50)but nothing changed. How to start it?
Hi,
Same problem same modules
solution ? -
I did a complete reinstall. This was the last time that i did an Update of the Magic Mirror :)
This happend with every update till now. -
-
This post is deleted! -
@MichMich Hi,
i backup my modules folder and my config folder
i delete MagicMirror folder
reinstall MagicMirror
copy/paste modules &config folders
i do that but same error on the same module
i don’t understand why
i need some help please
thanks -
why update do that ?
need to reinstall all modules
now its good … -
@MichMich How to solve this error?
pi@PrivatePiNetwork:~/MagicMirror $ git pull && npm install
Updating b799609…20823bf
error: Your local changes to the following files would be overwritten by merge:
fonts/package.json
modules/default/clock/clock.js
modules/default/currentweather/currentweather.js
modules/default/weatherforecast/README.md
Please, commit your changes or stash them before you can merge.
error: The following untracked working tree files would be overwritten by merge:
fonts/package-lock.json
package-lock.json
vendor/package-lock.json
Please move or remove them before you can merge.
Aborting -
hey I’ve been trying to install the magic mirror from https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh | bash and once I clicked enter and this message appeared
anyone any ideas how to solve this. a helpful answer and guide would be appreciated
-
@open_book How do you remove and reinstall the electron?
-
@afedriansyah it looks like you already have it cloned to the directory, if you really really want to start fresh (WARNING WILL DELETE YOUR EXISTING INSTALLATION):
rm -R ~/MagicMirrorand then rerun the script. If you just want to upgrade, after thegit pull, donpm install.Finally, I wouldn’t recommend running MM as root, unless you know what you’re doing…
-
@afedriansyah I’ve read that there might be some issues with the automatic installer in the Pi. If you do a re-install and it doesn’t work, try a manual install. All the instructions are on the GitHub page. ☺️
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login