MMM-NewsFeedTicker

[electros]

Thank you very much for the help, but still I do not understand how you moved that red line down. I would be curious, can not get any position you want on the vertical for this module?

[justjim1220]

@electros

you should be able to place it in any of the regions,
it works best in the top_bar, middle_center, and bottom_bar for the 100% width

[Cr4z33]

This post is deleted!

[Cr4z33]

@justjim1220 can you please help me setting a custom logo into

defaultLogo : ""

?

I’ve tried so far with several image formats and I’ve used both HTTP and HTTPS, but it still doesn’t load the logo… :thinking_face:

[justjim1220]

@cr4z33

what news site is it?

[Cr4z33]

@justjim1220 said in MMM-NewsFeedTicker:

@cr4z33

what news site is it?

It’s

http://feeds.feedburner.com/SkyitTg24

and I would like to load

https://tg24.sky.it/static/images/lv/skytg24_logo_header.png

as default icon (also because I notice that ALL the news feeds I set don’t show the icon in the scrolling bar).

Last but not least is it normal that it uses almost 50% of the CPU load? :frowning_face_with_open_mouth:
I’ve got a Raspberry Pi 3 B+ and a Samsung EVO Plus 32GB micro SD card.

[Mykle1]

@cr4z33 said in MMM-NewsFeedTicker:

it normal that it uses almost 50% of the CPU load?

It sure is. The Pi struggles with that type of animation. I’m surprised it’s only 50%. You should monitor your CPU temp, as well.

[Cr4z33]

@mykle1 said in MMM-NewsFeedTicker:

@cr4z33 said in MMM-NewsFeedTicker:

it normal that it uses almost 50% of the CPU load?

It sure is. The Pi struggles with that type of animation. I’m surprised it’s only 50%. You should monitor your CPU temp, as well.

So it’s not a matter of not so fast SD card then right?

I am using a heatsink on it therefore the average temperature so far is between 50° Celsius and 60° Celsius.

[Mykle1]

@cr4z33 said in MMM-NewsFeedTicker:

So it’s not a matter of not so fast SD card then right?

Well, it could be, but that’s unlikely. The CPU load issue has been around for some time and animations, especially marquee animations(scrolling) are the #1 culprit, or I miss my mark. Of course, if you used something more robust than a Pi that has a GPU you’d see a world of difference in the way MM performs.

[justjim1220]

@cr4z33

Apologies, I am working on the issue of using a custom logo if one doesn’t get pulled from the site.
Please stand by… :smiling_face_with_sunglasses: