MMM-Fuel zeigt nur Lade...... MMM-Fuel show only load......

[Stoffbeuteluwe]

MMM-Fule

[Stoffbeuteluwe]

@Stoffbeuteluwe bei mir steht das auch manchmal und nach einem Neustart funktioniert es wieder

[strawberry 3.141]

@Wuppi71 the provider should be specified as tankerkoenig see https://github.com/fewieden/MMM-Fuel/blob/master/README.md#tankerkoenig-germany-only

[kusselin]

Das is ja komisch…ich erstelle gerade einen zweiten Magic Mirror und habe das MMM-Fuel installiert über Console

danch habe ich das von der alten Config in die neue config kopiert:

{
    		module: "MMM-Fuel",
    		position: "top_right",
		provider: "tankerkönig",
    		config: {
        	api_key: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx",
        	lat: 49.5062,
       		 lng: 8.6657,
        	types: ["e10"],
       		radius: 10
    		}
		},

Überschrift kommt aber der Balken bleibt bei “LADEN” stehen :-(

eins zu eins kopiert…

Woran liegt das jetzt?

Das Modul Tankerkönig funktioniert!

Gruss

[Biebermann]

Ich habe seit zwei Tagen das selbe…Nichts wurde geändert an der Config…
Seltsam…:confused_face:

[Jalibu]

@biebermann bei mir funktioniert noch alles. Scheint also kein allgemeines Problem zu sein.

[MZ-BER]

@biebermann Ich hatte auch das Problem. Du musst deinen MM auf die neuste Version updaten.

(https://github.com/MichMich/MagicMirror/releases/tag/v2.17.1)

[Biebermann]

@mz-ber
wenn ich das mache, dann Funktioniert so einiges nicht mehr.
Die Frage wäre warum man Aktuallisieren muss, damit Module funktionieren wenn sie bis jetzt (bzw. bis vor 3 Tagen) gelaufen sind…

[Jalibu]

@biebermann Weil Zertifikate ein Ablaufdatum haben. Danach wird ihnen nicht mehr vertraut und gesicherte Verbindungen abgelehnt.

[strawberry 3.141]

@biebermann you can also read this for more details https://github.com/MichMich/MagicMirror/issues/2671

[andyyy]

I did update to latest MM version 2.17.1, but the MMM-Fuel just says loading (laden). My config hasn’t changed since months.

Any idea?

[strawberry 3.141]

@andyyy which fuel provider are you using? tankerkoenig, spritpreisrechner or nsw

[andyyy]

@strawberry-3-141

tankerkoenig I am using from the beginning. In Germany there is no other API I could you I suppose.

[strawberry 3.141]

@andyyy I just tested it, please make sure you use the newest version of MagicMirror + dependencies to contain the fix https://github.com/MichMich/MagicMirror/pull/2674

[andyyy]

@strawberry-3-141

I am on the latest MM version, but something screwed up in the background.

I did load the backup with MM 2.16 and started over again. No success.

Eventually I loaded my oldest available backup with MM 2.9. Interestingly, all modules still worked in this old setup incl. MMM Fuel. From there I updated the MM to 2.17.1 and surprisingly MMM Fuel kept working. :)

Apart from the fuel module 3 other module seem to be incompatible with latest MM version resulting in a black screen on startup. Most likely some required dependencies got removed in the MM core.

It would be great if we could introduce a community maintained compatiblity list of all 3rd party modules. I mean the status “maintained” or not gives a hint, but it does not necessarily mean it will not work any longer.

For now, I am happy. :)

[sdetweil]

@andyyy said in MMM-Fuel zeigt nur Lade...... MMM-Fuel show only load......:

it would be great if we could introduce a community maintained compatiblity list

we have that list, which is really not well maintained

3rd party modules
https://github.com/MichMich/MagicMirror/wiki/3rd-party-modules

as for black screen

we’ve been talking about that non stop for almost 4 months.

request
valid-url
rrule-alt

are the three libraries removed. all the failures are because module authors didn’t document their dependency on them.

which one I needed will be shown in the mm startup messages.

https://forum.magicmirror.builders/topic/15743/no-javascript-experience-config-js-not-working/11?_=1634730550751

[Fufu1408]

Hello everyone,

i have the problem, when the pi started , the MMM-Fuel modules shows me “load…” sometimes i can see the module, but most times i see the loading screen.
any ideas why?
and can i see the price from e10 and e5?

my config

{
module: “MMM-Fuel”,
position: ‘bottom_bar’,
config: {
updateInterval: 200,
api_key: “my key”,
lat: 49.56324,
lng: 11.34776,
types: [“e5, e10”],
sortBy: [“e5”, “e10”],
}
},

[Wuschel4711]

@fufu1408 I had the thame Problem, but i solved it.

The Problem is nodered and the dependencies which are neede by the module.

1. fs-extra
2. node-fetch

They need node > 12 !

How to solve:

1. Update your System: sudo apt-get update && sudo apt-get upgrade
2. Install NodeRed: bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered) --node14
3. be patient. This will take about 20-30 minutes !! The Script will do ALL the work for you!!
4. install fs-extra + node-fetsch: npm install fs-extra node_fetch
5. Update your MM: git pull
6. Install MM with: npm install (from inside your MM Directory)
7. Update MMM-Fuel: git pull
8. Install MMM-Fuel: npm install (from inside your MMM-Fuel Directory)
   Restart your System !!

Thats it !!