MMM-CalendarExt3

MMRIZE

I copied your config and test works.

To check whether there is issue;

Open the front-end dev-console in the browser (Ctrl+Shift+i) and see the console tab, find any suspicious issue.
Or install MMM-LogExt to record the front-end logs into the backend log.

flemmingss

MMRIZE

@flemmingss
You may still need to complete the installation of the module. You may have missed these instructions on installation;

npm install
git submodule update --init --recursive

Or, you are using Docker, and for some reason, css/custom.css and modules/MMM-CalendarExt3/CX3_Shared/CX3_Shared.mjs seems not being loaded. I’m not familiar with Docker so not sure.

flemmingss

@MMRIZE
Hmm, these commands di not solve anyhing.
To be more accurate, I am running this on UnRAID with this image: https://hub.docker.com/r/ich777/magic-mirror2
The modules are installed by entering the URL in a text-file “magicmirror2\modules\modules.txt”.

# Paste the links from the git repository wich you want to install here.
# The Y or N is the indication if the module needs 'npm install' to work.
# Also you can delete the # in front of any line below to install a module
# from the corresponding github repository (please don't delete the last line).

N https://github.com/MMRIZE/MMM-LogExt
Y https://github.com/MMRIZE/MMM-CalendarExt3.git
#Y https://github.com/ItayXD/MMM-Admin-Interface.git
#N https://github.com/werthdavid/MMM-BurnIn.git
#N https://github.com/barnabycolby/MMM-Carousel
#N https://github.com/Toreke/MMM-Dynamic-Modules.git
#N https://github.com/Kreshnik/MMM-JokeAPI.git
#Y https://github.com/slametps/MMM-NetworkConnection.git
#Y https://github.com/PoOwAa/MMM-network-signal.git
#N https://github.com/glitch452/MMM-ViewNotifications.git
#N https://github.com/ulrichwisser/MMM-HTMLSnippet
#Y https://github.com/eouia/MMM-AVStock
#N https://github.com/jeroenpeters1986/MMM-bitcoin-portfolio.git
#Y https://github.com/Elaniobro/MMM-stocks.git
#N https://github.com/rehne/MMM-Ecosia-Tree-Counter.git
#N https://github.com/amcolash/MMM-GoogleFit.git
#Y https://github.com/eouia/MMM-News
#Y https://github.com/pinsdorf/MMM-WeeklySchedule.git
#N https://github.com/mihairinzis/MMM-wiki
#Y https://github.com/Jopyth/MMM-Remote-Control.git
#Y https://github.com/ronny3050/phone-notification-mirror.git
#Y https://github.com/ianperrin/MMM-Strava.git
#N https://github.com/PtrBld/MMM-Scrobbler.git
#N https://github.com/MitchSS/MMM-Hue.git

# Don't delete this line!

It it is for any helt, this is the content of my MMM-CalendarExt3 module folder
https://fastupload.io/0UNy4rcEJ3b4nrI/file

MMRIZE

@flemmingss
Your RAR is not downloadable by security issue. Anyway, is there CX3_Shared/CX3_Shared.mjs in position? Your error log says it is not accessible on your system.

flemmingss

@MMRIZE
The “CX3_Shared” folder is empty, maybe that one is missing somthing?
Yo can try this: https://nextcloud.flemmingss.top/s/QBE24rBABaao7ci

karsten13

@flemmingss said in MMM-CalendarExt3:

The “CX3_Shared” folder is empty

this is the problem which is caused by the strange installation procedure in the used docker image.

The module installation is done via

npm init -y
npm install request --save

You have to ask the author of this script why he is doing this.

With this construction the postinstall/postupgrade scripts defined in the package,json of MMM-CalendarExt3 are never called so the CX3_Shared folder is empty.

flemmingss

@karsten13
Looks like your right, I did the install procedure manual inside the docker container and it is working like it should :D
Thanks for your help, I will inform the container developer about this issue.

root@413f2db9a7a6:/tmp# cd ..
root@413f2db9a7a6:/# cd magicmirror2/modules
root@413f2db9a7a6:/magicmirror2/modules# git clone https://github.com/MMRIZE/MMM-CalendarExt3
Cloning into 'MMM-CalendarExt3'...
remote: Enumerating objects: 301, done.
remote: Counting objects: 100% (117/117), done.
remote: Compressing objects: 100% (62/62), done.
remote: Total 301 (delta 65), reused 81 (delta 54), pack-reused 184
Receiving objects: 100% (301/301), 119.61 KiB | 1.21 MiB/s, done.
Resolving deltas: 100% (170/170), done.
root@413f2db9a7a6:/magicmirror2/modules# cd MMM-CalendarExt3
root@413f2db9a7a6:/magicmirror2/modules/MMM-CalendarExt3# npm install

> mmm-calendarext3@1.8.1 postinstall
> git submodule update --init --recursive

Submodule 'CX3_Shared' (https://github.com/MMRIZE/CX3_Shared) registered for path 'CX3_Shared'
Cloning into '/magicmirror2/modules/MMM-CalendarExt3/CX3_Shared'...
Submodule path 'CX3_Shared': checked out '44c7176e2b79a12e76badb78a49455bd7fbb22e3'

up to date, audited 1 package in 2s

found 0 vulnerabilities
npm notice 
npm notice New minor version of npm available! 10.2.3 -> 10.5.0
npm notice Changelog: https://github.com/npm/cli/releases/tag/v10.5.0
npm notice Run npm install -g npm@10.5.0 to update!
npm notice 
root@413f2db9a7a6:/magicmirror2/modules/MMM-CalendarExt3# git submodule update --init --recursive
root@413f2db9a7a6:/magicmirror2/modules/MMM-CalendarExt3#

EDIT: Github issue: https://github.com/ich777/docker-magicmirror2/issues/4

flemmingss

okay, new issue, I have gotten this working, but not with past days. I see events from now and forward, but nothing before, even if I have enabled broadcastPastEvents.

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information on how you can configure this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "0.0.0.0", // Address to listen on, can be:
	                      // - "localhost", "127.0.0.1", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out or empty, is "localhost"
	port: 8080,
	ipWhitelist: [], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.168.1.5 :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"],
	                                                       // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"],

	useHttps: false, 		// Support HTTPS or not, default "false" will use HTTP
	httpsPrivateKey: "", 	// HTTPS private key path, only require when useHttps is true
	httpsCertificate: "", 	// HTTPS Certificate path, only require when useHttps is true

	language: "no",
	timeFormat: 24,
	units: "metric",
	serverOnly:  "true" ,
			     // local for armv6l processors, default
			     //   starts serveronly and then starts chrome browser
			     // false, default for all  NON-armv6l devices
			     // true, force serveronly mode, because you want to.. no UI on this device

	modules: [
		{
			module: "alert",
		},
		{
			module: "calendar",
		//	position: "top_left", 					**Hide this module**
			
			config: {
				broadcastPastEvents: true,
				calendars: [
					{
						symbol: "calendar-check",
						name: "Felles",
						color: "cyan",
						url: "https://calendar.google.com/calendar/ical/xxx%40group.calendar.google.com/private-xxx/basic.ics" //felles
					},
					{
						symbol: "calendar-check",
						name: "Samayeh Turnus",
						color: "red",
						url: "https://calendar.google.com/calendar/ical/xxx%40group.calendar.google.com/private-xxx/basic.ics" //felles
					}
				]
			}
		},
		{
			module: "MMM-CalendarExt3",
			position: "top_bar",
			title: "Kalender",
			config:
				{
				//mode: "month",
				useMarquee: true, //animasjon for å se hele teksten
				}
		},
	
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

EDIT: Looks like the calendar settings did not refresh until i rebooted my system, working now

MMRIZE

@flemmingss
Set enough ‘maximumEntries’, ‘maximumNumberOfDays’ and ‘pastDaysCount’ of the default calendar.

flemmingss

@MMRIZE Tested that, and did not work, but when I rebooted the service, it worked. So these settings must need a restart somehow.

sdetweil

@flemmingss yes, the fetcher is started once, the web page can be refreshed, but the fetcher does not restart.

Welle05

Problem with full day events since summer time in Germany.

Full-day events which are part of a series are now spawn over two days. All series were built in winter time. I checked the original (google) Calendar : fine, also the Standard Calendar Module, but when it comes to Ext3 there are shown like this:

single full dayevents (not part of a series): fine
serial events with start date: also fine

Any idea?

Best regards

Chris

fedale

@Welle05 have you found a solution for this? i have the same issue in Sweden.
And it´s only for fullday events.

sdetweil

@fedale ext3 is expecting full day events to have 00:00 as the time.

with some change they come with utc offset

02:00

or whatever.

he could check the full day event flag and ignore the time

MMRIZE

@fedale @Welle05

See this.
https://github.com/MMRIZE/MMM-CalendarExt3/wiki/To-fix-wrong-repeated-fullday-event-displaying-(MM-2.27)

fedale

@sdetweil

Where can i input the offset?
Can i do that in the default calendar?

sdetweil

@fedale see the post before yours that gives you the fix

bobbylx

Hello all, so I’ve got MMM-Calendarext3 working just how I want and now working on some personalization. Can anyone advise what to change and where to add some shadow behind the date cells? Kind of like the shadow behind the previous days, I’d like to add some light gray or something to the entire calendar just so it doesn’t get lost in my wallpaper.
Second, anyone know how/where to change the border thickness for the current day?

thanks in advance.

MMRIZE

@bobbylx
For today cell border; Append this into your css/custom.css

/* css/custom.css */
.CX3 .cell.today {
  border: 2px solid #fff; /* default was 1px, so you can change to 2px or whatever */
}

For shadow behind the cell... Could you tell me more details or example?