MMM-NOAA - Another Weather Module

{
"GATHERING WEATHER STUFF": "Ontvangen weerdata...",
"Currently: ": "Actueel: ",
"Current Temp: ": "Huidige temperatuur: ",
"UV Index: ": "UV-Index: ",
"Wind: ": "Wind: ",
"From: ": "van: ",
"Barometer: ": "Barometer: ",
"Monday": "Maandag",
"Tuesday": "Dinsdag",
"Wednesday": "Woensdag",
"Thursday": "Donderdag",
"Friday": "Vrijdag",
"Saturday": "Zaterdag",
"Sunday": "Zondag",
"High:  ": "Hoog: ",
"Low:  ": "Laag: ",
"Humidity: ": "Luchtvochtigheid: ",
"Safe": "Veilig",
"Moderate": "Gemiddeld",
"Very High": "Zeer hoog",
"Extreme": "Extreem",
"Sunset": "Zonsondergang",
"Sunrise": "Zonsopgang",
" hours ": " Uren ",
" minutes ": " Minuten ",
"Amount of Daylight": "Aantal uren daglicht",
"Good Morning ":"Goedemorgen ",
"Good Afternoon ": "Goedenmiddag ",
"Good Evening ": "Goedenavond ",
"Air Quality Index: ":"Luchtkwaliteitsindex: "
}

cowboysdude

@pjkoeleman Huge Thanks!!

NOW with Dutch Language :)

Download:

[card:cowboysdude/MMM-NOAA]

pjkoeleman

@cowboysdude
You’re welcome

Nystro0m

@cowboysdude
I got a error after the update with following:

/home/pi/MagicMirror/modules/MMM-NOAA/MMM-NOAA.js:399
=======
^^^
SyntaxError: Unexpected token ===

I removed the ====== on line 399 with success to get the module working.

Im not sure if this is just on my side, im still new to this. But i thought it could good to be shared.

Edit: This could make a problem with updating the the module. I experience the clock getting stuck from time to time.

pjkoeleman

@Nystro0m
Looks to me that there is two times the same code in the js-file ecxept for the language settings. So @cowboysdude has to look into this.

Mykle1

@pjkoeleman said in MMM-NOAA - Another Weather Module:

So @cowboysdude has to look into this.

He’s doing a roofing job in 90° heat at the moment. On a Sunday! Who does that?

I’m sure he’ll fix it as soon as possible. That’s what he does.

cowboysdude

@Nystro0m and @pjkoeleman

Thank you both!!! IT was doubled, not sure how that happened but all fixed!! :)

Johans

installed module last night, settings all according the help file, but nothing is displayed.
Switched back to the wunderground module, that’s working fine.
any idea. I suppose that when the API key is working with the Wunderground module it should work with yours too.

what information do i need to provide for further investigation - also tell me how to get that. (I’m newbee - sorry for this - i’m in a learning process )
(language was set to “nl” and then changed again to “en”).
And I see module is loaded, but not displayed.

cowboysdude

@Johans check the console log and see what that tells you when it’s loading…

You need to start your mirror and hit the ‘ALT’ key there will be a menu at the top…you want ‘toggle developer…’

That’ll open up a side panel on the right and it will tell you what error there is…let me know so I can help you fix it :)

Nystro0m

@Johans
Im running on a Raspberry pi B ver.1 and it have some problems loading information from time to time when it been pushed to far.
I would make sure that it is no error in the console from NOAA or other modules:
Either by Comwboysdude method, but you could also run: “npm start dev” when starting MagicMirror.
Another way that i did find more speed efficient is to open the MagicMirror interface on a secondary computer by going to: “Your.PI.LocalIP:8080/”.
And then right-click and choose “inspect” in Chrome. Here you can find the console.

Make sure to have your WhitelistIP set properly.

I could also recommend Jophys - Remote Control Module.
With this you can restart you MagicMirror, enter the web interface and such remotely if you are not comfortable with ssh.

Johans

@Nystro0m
thanks, learned again something new, on how to remotely connect to the MagicMirror.
Meanwhile problem is solved.

removed the line 400.
these chars created an error ==========

Johans

@cowboysdude

thanks for showing me how to track & trace errors.
Found root cause - line 400 in module MMM-NOAA.js.
I removed the =========.

Also added the “nl”: “nl-NL” into the lang file section.

So now it’s all working - and in dutch - makes my wife happy :).
Very beautifull - thanks for you support.

cowboysdude

@Johans said in MMM-NOAA - Another Weather Module:

@cowboysdude

thanks for showing me how to track & trace errors.
Found root cause - line 400 in module MMM-NOAA.js.
I removed the =========.

Also added the “nl”: “nl-NL” into the lang file section.

So now it’s all working - and in dutch - makes my wife happy :).
Very beautifull - thanks for you support.

You are welcome… yes I fixed that on Github

Thank you!!! :)

Glad you made your wife happy! We have a saying here…

“Happy wife, happy life.” HAHAA

Nystro0m

@cowboysdude
This update made messed up the CSS a bit, this screenshot is from default main.css and NOAA.css
alt text

The table content regarding the forecast data is fixed by:
.MMM-NOAA .tdh{
display: table;

That also make it align to the right, fixing a problem where the are not align properly if the lowest/highest temperature indexing inconsistent between tenths and some bellow (adding a number) for example :
(up) 10 (down) 8
(up) 16 (down) 11

Also, wFont does not response to font-size anymore. Im currently investing in this.
.MMM-NOAA .wFont {

And the barometer logo i can’t seem to find the resize option, i got around this by manipulating to core image.

I would also appriciate if there is a possibility to could change the “daylight”, “uv-index” and “humidify” colors in the .css.

Here are a Swedish translation for “Amount of daylight”:
Tillgängligt dagsljus
I found that this already consist in the translation-file. Does not seem to be loading for me.