MMM-NOAA - Another Weather Module

{
"GATHERING WEATHER STUFF": "Ontvangen weerdata...",
"Currently: ": "Actueel: ",
"Current Temp: ": "Huidige temperatuur: ",
"UV Index: ": "UV-Index: ",
"Wind: ": "Wind: ",
"From: ": "van: ",
"Barometer: ": "Barometer: ",
"Monday": "Maandag",
"Tuesday": "Dinsdag",
"Wednesday": "Woensdag",
"Thursday": "Donderdag",
"Friday": "Vrijdag",
"Saturday": "Zaterdag",
"Sunday": "Zondag",
"High:  ": "Hoog: ",
"Low:  ": "Laag: ",
"Humidity: ": "Luchtvochtigheid: ",
"Safe": "Veilig",
"Moderate": "Gemiddeld",
"Very High": "Zeer hoog",
"Extreme": "Extreem",
"Sunset": "Zonsondergang",
"Sunrise": "Zonsopgang",
" hours ": " Uren ",
" minutes ": " Minuten ",
"Amount of Daylight": "Aantal uren daglicht",
"Good Morning ":"Goedemorgen ",
"Good Afternoon ": "Goedenmiddag ",
"Good Evening ": "Goedenavond ",
"Air Quality Index: ":"Luchtkwaliteitsindex: "
}

cowboysdude

@pjkoeleman Huge Thanks!!

NOW with Dutch Language :)

Download:

[card:cowboysdude/MMM-NOAA]

pjkoeleman

@cowboysdude
You’re welcome

Nystro0m

@cowboysdude
I got a error after the update with following:

/home/pi/MagicMirror/modules/MMM-NOAA/MMM-NOAA.js:399
=======
^^^
SyntaxError: Unexpected token ===

I removed the ====== on line 399 with success to get the module working.

Im not sure if this is just on my side, im still new to this. But i thought it could good to be shared.

Edit: This could make a problem with updating the the module. I experience the clock getting stuck from time to time.

pjkoeleman

@Nystro0m
Looks to me that there is two times the same code in the js-file ecxept for the language settings. So @cowboysdude has to look into this.

Mykle1

@pjkoeleman said in MMM-NOAA - Another Weather Module:

So @cowboysdude has to look into this.

He’s doing a roofing job in 90° heat at the moment. On a Sunday! Who does that?

I’m sure he’ll fix it as soon as possible. That’s what he does.

cowboysdude

@Nystro0m and @pjkoeleman

Thank you both!!! IT was doubled, not sure how that happened but all fixed!! :)

Johans

installed module last night, settings all according the help file, but nothing is displayed.
Switched back to the wunderground module, that’s working fine.
any idea. I suppose that when the API key is working with the Wunderground module it should work with yours too.

what information do i need to provide for further investigation - also tell me how to get that. (I’m newbee - sorry for this - i’m in a learning process )
(language was set to “nl” and then changed again to “en”).
And I see module is loaded, but not displayed.

cowboysdude

@Johans check the console log and see what that tells you when it’s loading…

You need to start your mirror and hit the ‘ALT’ key there will be a menu at the top…you want ‘toggle developer…’

That’ll open up a side panel on the right and it will tell you what error there is…let me know so I can help you fix it :)

Nystro0m

@Johans
Im running on a Raspberry pi B ver.1 and it have some problems loading information from time to time when it been pushed to far.
I would make sure that it is no error in the console from NOAA or other modules:
Either by Comwboysdude method, but you could also run: “npm start dev” when starting MagicMirror.
Another way that i did find more speed efficient is to open the MagicMirror interface on a secondary computer by going to: “Your.PI.LocalIP:8080/”.
And then right-click and choose “inspect” in Chrome. Here you can find the console.

Make sure to have your WhitelistIP set properly.

I could also recommend Jophys - Remote Control Module.
With this you can restart you MagicMirror, enter the web interface and such remotely if you are not comfortable with ssh.

Johans

@Nystro0m
thanks, learned again something new, on how to remotely connect to the MagicMirror.
Meanwhile problem is solved.

removed the line 400.
these chars created an error ==========

Johans

@cowboysdude

thanks for showing me how to track & trace errors.
Found root cause - line 400 in module MMM-NOAA.js.
I removed the =========.

Also added the “nl”: “nl-NL” into the lang file section.

So now it’s all working - and in dutch - makes my wife happy :).
Very beautifull - thanks for you support.

cowboysdude

@Johans said in MMM-NOAA - Another Weather Module:

@cowboysdude

thanks for showing me how to track & trace errors.
Found root cause - line 400 in module MMM-NOAA.js.
I removed the =========.

Also added the “nl”: “nl-NL” into the lang file section.

So now it’s all working - and in dutch - makes my wife happy :).
Very beautifull - thanks for you support.

You are welcome… yes I fixed that on Github

Thank you!!! :)

Glad you made your wife happy! We have a saying here…

“Happy wife, happy life.” HAHAA

Nystro0m

@cowboysdude
This update made messed up the CSS a bit, this screenshot is from default main.css and NOAA.css
alt text

The table content regarding the forecast data is fixed by:
.MMM-NOAA .tdh{
display: table;

That also make it align to the right, fixing a problem where the are not align properly if the lowest/highest temperature indexing inconsistent between tenths and some bellow (adding a number) for example :
(up) 10 (down) 8
(up) 16 (down) 11

Also, wFont does not response to font-size anymore. Im currently investing in this.
.MMM-NOAA .wFont {

And the barometer logo i can’t seem to find the resize option, i got around this by manipulating to core image.

I would also appriciate if there is a possibility to could change the “daylight”, “uv-index” and “humidify” colors in the .css.

Here are a Swedish translation for “Amount of daylight”:
Tillgängligt dagsljus
I found that this already consist in the translation-file. Does not seem to be loading for me.

cowboysdude

@Nystro0m Something is wrong with the layout… I’ll look at this later. Sorry about that.

What version of MM are you running? My dev machine is running 2.1.0 so that may be a reason you’re having issues… if you’re running a newer version so I just learned [Thanks @Mykle1]