Internet Monitor

Mykle1

This post is deleted!

Mykle1

@ronny3050 - this is what I got when I ran pm2 logs

[TAILING] Tailing last 10 lines for [all] processes (change the value with --lines option)
/home/pi/.pm2/logs/mm-error-0.log last 10 lines:
0|mm       | npm ERR!     npm bugs magicmirror
0|mm       | npm ERR! Or if that isn't available, you can get their info via:
0|mm       | npm ERR!     npm owner ls magicmirror
0|mm       | npm ERR! There is likely additional logging output above.
0|mm       | 
0|mm       | npm ERR! Please include the following file with any support request:
0|mm       | npm ERR!     /home/pi/MagicMirror/npm-debug.log
0|mm       | ERROR! Could not find main module js file.
0|mm       | ERROR! Could not find main module js file.
0|mm       | ERROR! Could not find main module js file.

/home/pi/.pm2/logs/mm-out-0.log last 10 lines:
0|mm       | Starting module: newsfeed
0|mm       | Sockets connected & modules started ...
0|mm       | Launching application.
0|mm       | Create new calendar fetcher for url: http://www.calendarlabs.com/templates/ical/US-Holidays.ics - Interval: 300000
0|mm       | Create new calendar fetcher for url: https://calendar.google.com/calendar/ical/themykle%40themykle.com/private-XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX/basic.ics - Interval: 300000
0|mm       | Create new news fetcher for url: http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml - Interval: 300000
0|mm       | 
0|mm       | > magicmirror@2.1.0 start /home/pi/MagicMirror
0|mm       | > electron js/electron.js
0|mm       | 

[STREAMING] Now streaming realtime logs for [all] processes

ronny3050

@Mykle1 Could you run the following?
pm2 flush
pm2 logs and wait for a couple of minutes of log?

Thanks!

Mykle1

@ronny3050 wait for it to complete doing something? Will it stop by itself or I have to do something?

If so, what do I have to do?

It’s running now

ronny3050

@Mykle1 yes, after typing pm2 logs it will update logs realtime so then you can post it here. I am wondering what exactly crashes your mirror inside my module.

Mykle1

@ronny3050 ok, I’m waiting for it to complete

Mykle1

I’ve been waiting for 34 minutes and nothing has happened. My console still reads:

[STREAMING] Now streaming realtime logs for [all] processes.

Am I supposed to do something? run MM with your module perhaps? You didn’t say

Mykle1

Well, I waited over and hour, staring at the console, and nothing happened since I ran:
pm2 flush
pm2 logs

Here is what I’ve been staring at:

pi@Pi3:~ $ pm2 flush
[PM2] Flushing /home/pi/.pm2/pm2.log
[PM2] Flushing
[PM2] /home/pi/.pm2/logs/mm-out-0.log
[PM2] /home/pi/.pm2/logs/mm-error-0.log
[PM2] Logs flushed
pi@Pi3:~ $ pm2 logs
[TAILING] Tailing last 10 lines for [all] processes (change the value with --lines option)
/home/pi/.pm2/pm2.log last 10 lines:
/home/pi/.pm2/logs/mm-out-0.log last 10 lines:
/home/pi/.pm2/logs/mm-error-0.log last 10 lines:
[STREAMING] Now streaming realtime logs for [all] processes

Mykle1

@cowboysdude said in Internet Monitor:

I tell you what I’d do before I tried it again… backup my sd card

Done. I made two backups of my SD card. One locally and one on my backup server. While that was going on I installed a fan on my Pi. I have spare parts lying around. Good little mini project while I waited for the backups. Now my Pi runs at 35 C, down from 60 C. Sweet.

cowboysdude

@Mykle1 That’s a great idea that I should probably do as well… adding the fan!!!