Stop the screensaver!

cowboysdude

Good lord just install xscreensaver and then disable the screen saver from there… easiest way without having to modify a ton of files… then being frustrated because it still doesn’t work :)

https://www.reddit.com/r/raspberry_pi/comments/4hwdwy/how_to_install_the_latest_xscreensaver_on_a/

frog

There’s no need for that attitude. Please desist as this is a forum for helping people. I also had this problem so it isn’t isolated. It may not be possible to add a keyboard and mouse to the screen and use the screensaver utility.

onetwankyfive

or buy a mouse jiggler
https://www.amazon.com/WiebeTech-Programmable-Mouse-Jiggler-MJ-3/dp/B00MTZY7Y4/ref=sr_1_1?ie=UTF8&qid=1482934294&sr=8-1&keywords=mouse+jiggler

frog

@onetwankyfive said in Stop the screensaver!:

or buy a mouse jiggler
https://www.amazon.com/WiebeTech-Programmable-Mouse-Jiggler-MJ-3/dp/B00MTZY7Y4/ref=sr_1_1?ie=UTF8&qid=1482934294&sr=8-1&keywords=mouse+jiggler

😀

markiper

Thanks everyone for the erplies. I am still having the same issue, but doing some more testing and reading. I found this post:

http://www.geeks3d.com/hacklab/20160108/how-to-disable-the-blank-screen-on-raspberry-pi-raspbian/

In theory, just modifying the lightdm.conf should do the trick with newer versions of Raspbian Jessie Lite. I will poke around some more, hopefully i find a fix, so I can provide something back to this community.

lolobyte

Hi all,

after doing this

Disable the screensaver:
Go to LXDE-autostart config:

sudo nano /etc/xdg/lxsession/LXDE/autostart

add the following lines:

@xset s noblank
@xset s off
@xset -dpms

Save and close, using the commands CTRL-O and CTRL-X.

Go to lightdm.conf:

sudo nano /etc/lightdm/lightdm.conf

add the following lines in section [SeatDefaults]:

xserver-command=X -s 0 -dpms

The fucking screensaver is starting again.

Then i do following:

sudo apt-get install xscreensaver
sudo apt-get remove xscreensaver

An i never see a starting screensaver gain.

Good luck!

markiper

So here is how I was able to fix my issue with the screen saver. I started this project following the tutorial from here:

https://github.com/MichMich/MagicMirror/wiki/Jessie-Lite-Installation-Guide

When you get to the Disable the ScreenSaver portion of the article, instead of changing the autostart file under

/etc/xdg/lxsession/LXDE/autostart

You should modify the autostart file under ~/.config/lxsession/LXDE/autostart

sudo nano ~/.config/lxsession/LXDE/autostart

Comment the first 3 lines (using a #), then add the same three lines listed in the tutorial. The final autostart file after all modifications should look similar to:

#@lxpanel --profile LXDE
#@pcmanfm --desktop --profile LXDE
#@xscreensaver -no-splash

@xset s noblack
@xset s off
@xset -dpms

Once that is done, follow the instructions to modify the lightdm.conf file:

sudo nano /etc/lightdm/lightdm.conf

[SeatDefaults]
xserver-command=X -s 0 -dpms

Save the changes, reboot your raspberry pi (I am using an RPi3), and the screen saver is gone for good. Hopefully this helps someone else having the same issue.

cowboysdude

@frog said in Stop the screensaver!:

There’s no need for that attitude. Please desist as this is a forum for helping people. I also had this problem so it isn’t isolated. It may not be possible to add a keyboard and mouse to the screen and use the screensaver utility.

Attitude? Oh you haven’t seen my attitude… just making a simple suggestion where there doesn’t need a case made out of it. It’s THE simplest way for NON programmers to do it…

rcollie

I realize how (super) old this topic is, but for anyone who stumbles across it and still dealing with this, xscreensaver really is the easiest solution.

sudo apt-get install xscreensaver

Just change the screen saver in there to no screen saver, and you’re sorted.

PaulB

Hey guys,

there is another option on disabling the screensaver, which worked perfectly for me.
Just disable the screensaver in the option menu of debian.

Hope this helps someone :)