Hello to all forum.
Finally after a tones af reading, asking, searching I managed to finish and hang my mirror to the wall so it is time to share my effort with you.

The frame is regular wood. It is thicker than I thought but it is my first try.

I painted with grey chalkpaint and after my wife’s suggestion we gave it a vintage look before polish it.

The project is running on an Rpi 4B 4GB
The modules I am using are the follwing:
MMM-GoogleAssistant
MMM-NewsFeed
MMM-SpeedTest
MMM-Tools
MMM-Weather
MMM-WiFiPassword
MMM-Astro
MMM-SpeedTest
MMM-EasyBack
MMM-StopwatchTimer
MMM-GABackground
MMM-IronManGA
MMM-Pages
Gateway
EXT-Alert
EXT-Background
EXT-Bring
EXT-Browser
EXT-Detector
EXT-Governor
EXT-RadioPlayer
EXT-Screen
EXT-ScreenManager
EXT-UpdateNotification
EXT-Volume
EXT-YouTubeVLC

Behind the frame there is a 2m WS2812B which is powered from an external 5V power supply and controlled by an arduino. I have uploaded a schetch I found here with about 20 effects which I change from an extelnal push button. Also one raw of zimple RGB led strip running on an external 12V power supply. This one is used for GA statuses. It is usefull for me because I am using an old TV with built-in speakers. That means that when the TV is closed I have no audio either so when I use the command to turn it on I do not know if GA heard me or not. Any way here are some picures of my built.

I have two of these 12V fans to cool the frame


The circuit that drives the RGB led strip for GA status.

My mini control panel

And that is my final result

I hope you like my try. At this point I would like to thank everyboby who replied to my hundrends of questions and hepled me finish this project.
Special thanks and RESPECT to @bugsounet for his excellent wiki and recipes and for his patience!

UPDATE!
Hello everyone. I would like to tell you that I just migrate from Rasberry pi 3B+ to Rasberry pi 4B 4GB. I just want to tell you that It worked perfectly by just instering the SD from the old pi. The only thing I had to do Is to configure the audio output bacause I use hdmi to transfer audio. Everything else worked as a charm. OS, MM, GA, leds everything. I made this update in case someone else is thinking if it is possible. Well IT IS!!!

@cowboysdude I just noticed that you have made a small mistake in NOAA’s translations folder in github. You have named the Russian translation as Greek. Check it out when you have the time.

@Egnos I didn’t know you want a picture too. Although this, this and this seem to have a picture of the article but better is to check them yourself to see if they fit your needs.

@mykle1
Thank you so much.

n26 - Greece - Athens

@cowboysdude
Hello. I did the update and it looks good but still no Greek translation. Everything is in English. If it is using my config.js for the language it is in english because if I turn it to Greek I get a black screen when I restart MM. And I am using Dark Sky as provider.

Can somebody help me with these error logs?

0|mm  | (node:23821) UnhandledPromiseRejectionWarning: TypeError: Cannot read property 'refs' of undefined
0|mm  |     at /home/pi/MagicMirror/modules/MMM-Remote-Control/node_helper.js:238:31
0|mm  |     at /home/pi/MagicMirror/modules/MMM-Remote-Control/node_modules/simple-git/src/git.js:780:18
0|mm  |     at Git.<anonymous> (/home/pi/MagicMirror/modules/MMM-Remote-Control/node_modules/simple-git/src/git.js:820:18)
0|mm  |     at done (/home/pi/MagicMirror/modules/MMM-Remote-Control/node_modules/simple-git/src/git.js:1432:21)
0|mm  |     at /home/pi/MagicMirror/modules/MMM-Remote-Control/node_modules/simple-git/src/git.js:1457:16
0|mm  | (node:23821) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). (rejection id: 1)
0|mm  | (node:23821) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js process with a non-zero exit code.
0|mm  | ATTENTION: default value of option force_s3tc_enable overridden by environment.

My remote control module works very well. Is there something I must do?