@strawberry-3-141 cheers! 👍🏼

@michmich no thanks to you instead!

if it wasn’t for you all this would NEVER have happened. :heart:

@vinp grazie. 😁

It’s 6 cm deep.
The TV wasn’t that thick, but I wanted to leave 3-4 cm more for room to fit all the stuff behind.

@sdetweil it’s all written in the OP. 😉

@dæmoneyes I got the TV for free from Samsung because of a promotion.
Everything else is almost all stuff I was already having apart from the hangers and other minor things.

Let’s say that if I had to buy everything from scratch it would have costed about 600-700 EUR?

Side view is where the LED strip is.
Tell me if you want to see it anyway. 😉

@dæmoneyes yes correct, but if you aren’t going to do a mirror bigger than let’s say a A4 paper then you can ask Pilkington to send you a free sample.

I did and they sent it without any hassle. 😉

@goprojojo I guess he just scheduled the reboot command into cron (Google for it). ;)

@davyc yes please fix it as I am getting the same issue (actually since today only although I got it running perfectly for weeks… :thinking_face: )

So after 14 days I was FINALLY able to find a volunteer strong enough to help me hanging this 30 kg 55" smart mirror to the bathroom wall! :face_with_tears_of_joy:

I took inspiration from @spitzlbergerj wonderfull smart mirror and I have to thank him for giving me the Sketchup file and all the informations needed! :thumbs_up_medium_skin_tone:

The frame is made by beechwood (all the cutting and moulding was made by a carpenter) with specific measures to perfectly contain the LED TV.

The glass has been glued to the frame by using a very special glue called Soudal Fix All High Tack.
Keep it in mind if you want to make a borderless smart mirror as it is very effective.

List of parts:

• Raspberry Pi 3 B+
• 55" Samsung LED TV UE55NU7170
• Beech strips
• Pilkington MirroView glass
• 15W SEBSON Mirror Light LED
• Poly Pool pp2522.2 Spaziozero Socket Rack
• BTicino S3610D/F Connector Adaptor for P 30 and Pin 10 Amp with Lightning Protection
• USB microphone Andoer (I made a hole at the bottom in the center of the frame to fit it)
• 2 x GedoTec Cabinet hanger Cabinet suspension invisible Upper cabinet Buoyancy 130 kg Steel zinc plated for Press-in operation (find in the link also the leftside hanger)
• A bunch of very good & handy WAGO 221-413 ELECTRICAL WIRE BLOCK CONNECTOR STRIP
• A generic 4000K LED strip all around the frame to improve room light

List of 3rd-party modules:

• MMM-AssistantMk2
• MMM-DarkSkyForecast
• MMM-Hotword
• MMM-NowPlayingOnSpotify
• MMM-PushBulletNotifications
• MMM-Remote-Control
• MMM-RTSPStream

Some other pics of my mirror:

Special thanks go to (again) @spitzlbergerj , @Sean (especially for custom voice command needs and for initial modules setup), @shbatm for struggling at trying to help me fixing bugs and (my bad) mistakes done by myself (:smiling_face_with_open_mouth_cold_sweat:), @evroom and whoever else I forgot to mention (sorry!).

Feel free to ask here, but give me time to answer because I have a quite busy life. :face_with_stuck-out_tongue_winking_eye:

SketchUp file for the frame:
https://www.dropbox.com/s/rr23bbfu0i34ksa/Cr4z33 Mirror.skp?dl=0