@kayakbabe well, all I can say, is I must not have tested it right.
my apologies

try again… all three scripts corrected now

@ankonaskiff17 I have to agree that DAKBOARD is super lame. I read about MM a long time ago and found DAKBOARD becuase of my MM research. I actually looked at it for about a hour and thought it was lame too. MagicMirror is so customizable and I am a tinkerer. I like to change up things. I like to fix things and not wait on someone else to update when some api changes. So, I decided to tackle MagicMirror. I’ve learned a lot and this is a great community.

@robertjunior24 the problem is that RTSP isn’t supported by Web protocals.

Here’s what I’m currently doing for my Reolink cameras:

I use an PI 4 with Motion Eye OS (Discontinued, but still kinda works, there is betas of an attempt to bring MotionEye back) to convert the RTSP streams to Web streams. Then using MMM-EmbedURL, I’m able to pick up the web streams to use on my mirror.

What I’d like to do is use something faster and more reliable - (Scrypted?) to do the conversion. Currently, there’s a lag that will form within the motioneye software, so I tend to reboot the pi once an hour (overdone, but it works) to keep it reasonable.

If I use the Framed version of the URLs that MotionEyeOS provides me (like http://192.168.0.7/picture/2/frame/) - I don’t have to have MMM-Embed URL reset the picture, the system will provide a temporary “No Camera” image while it’s down.+

Important note: Pi 5 (and newer, eventually) will NOT run what’s required for the old software, so Pi4 is what’s recommended.

this one: 47af05e1-d905-4320-a8da-2f792e827985-image.png

I’m trying to convert from MMM-OpenWeatherForecast to something else, but Openweather is confusing me with the API subscription.

same situation here. I like the above module but I don’t want to subscribe to the new openweather api.

First alternative was the mm weather module because it has several providers so you can switch easily. But the design is so far away from MMM-OpenWeatherForecast …

So next approach was to use the data from mm weather for an own module with better UI.

Thats the current output:

b73b079c-f94e-4062-b8fd-cefb078f6045-grafik.png

It is still a beta version and not published yet.

Another approach could be to extend the mm weather module with configurable njk templates and the cool skycons (which can be animated) …

@JohnGalt Oh crap. Thank’s for the hint! I fixed it :-)

@sdetweil

Hi

That´s my Sensor , and that´s my config:

module: "MMM-DHT22", position: "top_left", config: { gpioPin: 17, fontSize: '16px', // Font size for the header fontFamily: 'Arial', // Font family for module text showThermometerIcon: true, // Show the thermometer icon showDropletIcon: true, // Show the droplet icon showTemperatureText: true, // Show the "Temperature" text showHumidityText: true, // Show the "Humidity" text headerText: 'Local Environment', // Header text displayed above the values updateInterval: 120, // Update interval in seconds for fetching sensor data temperatureIconColor: 'red', // Color of the temperature icon humidityIconColor: 'blue', // Color of the humidity icon temperatureFontSize: '18px', // Font size for temperature humidityFontSize: '14px', // Font size for humidity temperatureOffset: 0, // Temperature offset adjustment in degrees Celsius humidityOffset: 0, // Humidity offset adjustment in percentage points temperatureUnit: 'C', // Default to Celsius ('C') or use 'F' for Fahrenheit layout: 'horizontal', // Default layout style ('horizontal' or 'vertical')

okay thanks

hi,
yes I am using MMM-GroveGestures, and I would like to suspend the screen for example with “CLOCKWISE” and reactivate it with “ANTICLOCKWISE”

@BJK did you use the xrandr command in your pre-bookwarm script?

changed css file now the compliments banner is to small and gone to the left instead of center

body {
margin: 10px;
position: absolute;
width: calc(100% - 20px);
height: calc(100% - 20px);
margin-bottom: -10px;
font-size: 1rem;
font-weight: 300;
line-height: 1.5;
color: rgba( 0, 150, 254, 1 );
back.ground: transparent;

@ludoRaspberry
encore une fois, le runtime magicmirror est entièrement javascript. la partie visuelle de MagicMirror est une application web. en tant que tel, il ne peut pas accéder directement aux ressources locales, au matériel ou aux systèmes de fichiers.

la conception fournit un processus local de nœud, appelé node_helper. il peut accéder aux ressources locales, comme les broches des capteurs et les fichiers. l’assistant et les composants Web sont connectés via un socket Web, enveloppé dans une fonction javascript.

pour voir comment les modules effectuent ce type d’opérations, vous pouvez consulter leur code, voir la liste des modules tiers ici https://github.com/MagicMirrorOrg/MagicMirror/wiki/3rd-party-modules

@flemmingss no. MagicMirror uses a designed called SPA, single page application.

the data presented on this single page can change but it only serves one page. you can see the frame of that single page in the file index.html

Thanks everyone for the replies

Ok, thanks

@Dankodan not the default clock

@sprior said in auto recovery from mirror freeze:

Not normally no, but for some things you can grant a hole in the container to allow direct access to some things

that is exactly the same…

the app (jenkins, chrome) running on the docker host can access the service in the container…

it is NOT the other way…

the thing in the container can invoke things on the docker host

anyhow… pm2’s JOB is to launch and keep running apps.

you can use it for anything.

I have a system where I launch the spotify service (raspotify), the camera motion detector (motion) and magicMirror on two different screens…

I can kill any of them and pm2 will relaunch whatever has ended…

SO, the thing being launched cannot ‘end’…

The only game on MM I know is snake: https://github.com/superuserx/MMM-Snake :-)

@karlh I use MMM-ImagesPhotos to display pictures on mm from my Linux file server, effectively my NAS.

my Linux server shares using samba (windows file server), and I mount that as a folder on my SBC. (see /etc/fstab)

this module uses a fixed name for the source of the files, so I use a file system link tosp that to the mount. (see ln command)

I display the images as background

@chichi1887 awesome. thanks for the feedback