So is anyone interested? It would be really cool to have a module like this :)

Hi all, Anyone able to create a module to show the ‘Now Playing’ of a Shoutcast stream? Not necessarily to play the stream but to be able to see what’s playing? Thanks,

Not too bad those dutch railways…😁. But on topic, did you try MMM-nstreinen? See the page https://github.com/MichMich/MagicMirror/wiki/3rd-party-modules for more info

Hello everyone I am looking for a module that gives me the intestinal bus for my son I but you a link on my bus network grenoble in France my bus network Thanks for your help

Hello everybody, I used the PIR Module from @paviro to turn on my screen only when a movement is noticed. Because I wanted to get rid of the sensor bulb, I want to switch to a radar sensor. I still use the PIR-Modul, which works very well. I ordered and tested different sensors. Two of them are my favorites: 1.) HFS-DC06: the best on this sensor is, that you can adjust them very easily. But I noticed a very long delay until it recognizes a movement. Maybe it is my fault, when you are confident to this sensor and can say something to it, feel free 2.) the second favorite is a HW-MS03. Unfortunately you can’t adjust them (only when you can solder SMDs…) But this sensor is very very fast. and here is my request, because I can’t use Javascript: When the HW-MS03 recognizes a movement the screen turns on. As soon as the HW-MS03 doesn’t recognizes a movement anymore the screen immediately turns off. Because of this sensitivity, the screen goes on off on off very quick which is not good for the screen. Can someone edit the module for me: When the HW-MS03 recognizes a movement, the screen should tun on and should stay on for a certain time (e.g. 20 seconds, maybe this can be variable?), no matter what the sensor recognizes, when the sensor still recognizes a movement after this time, the time starts again, and so on until the sensor doesn’t recognizes a movement. I hope you can help me. Thanks so much!!

@3d And thank you for your kind words. Peace.

I like the idea of this, is there something made for this yet?

It would be nice if someone updated or rewrote the Fitbit module, as the current one is 3 years old, apparently no longer supported (several unresolved issues from three years ago in the troubleshooting forum), and Fitbit has completely redesigned their developer portal so the instructions are of little help. There are quite a few Fitbit users out there, and its a logical application for the MagicMirror.

I have a .sh file of google assistant, I want it to run like a module, like add module that can run .sh file

@ralberth said in Simple MySQL query: current_date() Yes it’s Turkish :) Module is working :thumbs_up: But I need a little todo :) I’m using this module for my son’s daily course schedule and meal chart. Previously, I use a php script (on my NAS) to get data from mysql and and parse with my Home Assistan server from RestApi and pull form Home Assistant server via MMM-homeassistant-sensors :smiling_face_with_halo: (I know it’s very dirty method) MySql query in php is displaying next day’s data after 15:00 each day (sample code bellow) to aware of next day program. $bugun = date("l"); $yarin = date("l", time()+86400); $hour = date('H'); if ($hour > 15) { $bugun = $yarin; } Is it possible to use additional string and if statement in config file?

Hi Everyone ! I am a big tennis fan and I wonder if anyone might be interested to build a module which could display tennis scores (for example following one player and sees his last 5 games) or maybe even a tournament draw (grand-chelem, masters 1000). I dont know any source to fetch the data, but maybe from ATP/WTA website it could be possible.

@gas-prices Thought this was a good idea (gas prices by voice command). Decided I wanted it on my mirror, displaying 10 locations at a single glance, thanks to @cowboysdude’s fine MMM-Gas module. Show when you need it, hide when you don’t. Voice command for gas prices on your mirror. Short video. https://youtu.be/60RT_neRi0M

I understand what you mean. Although I am not quite sure why a program that asks for Wifi name and password should be easier to handle for the average joe then clicking the wifi button on a OS and typing in the password which is a lot close to what they are know from their Windows system and do not have to understand another UI they need only for the first Setup. Well however when you really want to do this for the average joe so he has absolutely NOTHING to do with anything but their favourite spysystem windows ;) I would write a windows tool for it. Either one doing it over SSH (which I do not really like because the average joe will just leave SSH open with standard key and you have to explain them what the heck is SSH and how to activate it) or just let the user plugin their SD card which they have to do anyways when installing Linux and let the program edit the file including all Wifi logins. For the rest of MM2 you could do a preset Image of debian that already has MM2 setup (maybe create a auto update tool for debian that just checks for OS and MM2 updates once a day

I have a camera and microphone attached to my MM. I want to facetime/video chat with someone in another room using my PC or Phone. The MM has no mouse/keyboard/or buttons so the mirror needs to auto answer and pop up a video stream of me and send me a video stream of them all with zero interaction from the person standing infront of the mirror. Then when I hang up it needs to close the video chat window and go back to the regular MM screen. Is this possible? Or is it really complicated to configure?

I will try of course. Thank u really so much. Anyway also with this „error“ it works Fine 😍

Hello Max, Following up on your message on topic https://forum.magicmirror.builders/topic/8604/rgb-light-changing-during-day I have update the ESP RGBw control with timers. Now it does it all.

@Gooral yes snowboy might already help, since the hotwords are trained with 3 examples of one person, so only quite similar voices get detected (but will not work when the voices are quite similar) another possiblity you might want to check out (did not try it myself yet) is https://github.com/Adirockzz95/Piwho

@sean said in Currated Art: oops, my afternoon… Haha. No worries, my friend! :-)

Anybody know if there is a module out there that can provide standings for the Little League baseball world series?

What do you mean, they won’t let you use the API? Did you apply for access to the Geofox-API and they denied? What did they say? https://www.hvv.de/fahrplaene/abruf-fahrplaninfos/datenabruf/ The only other module I know of is this one: https://forum.magicmirror.builders/topic/369/hamburg-hvv-public-transportation-module-using-realtime-data/8 (where we both already posted. ;) )