Old LCD PC monitor

[tomyboy96]

@birdy I used some stuff from this site when i configured the Rapi (Y)

https://www.raspberrypi.org/forums/viewtopic.php?p=269212

Good Luck!

[birdy]

Hi guys,

the new cable is working!!!

Now the easiest part: coding ;)

Next update, when I get a keyboard from somewhere :D

[birdy]

Hi,

there is also another challenge:

I would liek to get rid of these metal body. The side you can see shoud me glued to the plastic.

What can I put between the curcuit and the plastic? Some small plastik tubes? Wood? Rubber? Should I then glue the boards or better (for the future) screw it to to the “legs”?

How about grounding it? Needed?

Cheers
Birdy

[tomyboy96]

@birdy i used one of thease.

http://www.biltema.se/sv/Fritid/Friluftsliv-och-camping/Kok-och-vatten/Vattendunk-2000023717/

Easy to bend och drill in

[birdy]

you used a plastic water canister? In what manner?

[tomyboy96]

@birdy i cut out flat pices that i drilled the board to.

[birdy]

so like this (side view)?

[tomyboy96]

@birdy yeah, but i used velcro tape insted of glue

[birdy]

one question, which is bothering me: the controller plate has spot for grounding (the plate was connected with the metal body before via this “grounding spot”). Do I need to ground it e.g. with power supply or similar or I can leave the plate ungrounded?

[birdy]

So I got the MM up an running :)

back side:

Next steps:

1. MM configuration & understanding how it works
2. to shorten the wooden legs
3. to order + build a frame
4. put everything together :)

BR
birdy