Read the statement by Michael Teeuw here.
config
-
npm ERR! A complete log of this run can be found in: npm ERR! /home/pi/.npm/_logs/2019-11-16T14_09_4 code_text `` -
@geo needs to be done from inside the MagicMirror folder…
-
@sdetweil hi after another attempt i find the config is empty all that is available is the sample
-
@geo i posted the corrected config.js above, cut/paste it back into the ~/MagicMiror/config/config.js file
-
@geo would it be better to delete and re install
-
@geo no… just missing the config file…
select the text in my post above, right click mouse, select copy,
then open an editor on the file and right click mouse pastei use ssh and BitVise ssh client so I can access and edit files thru my windows machine
-
@sdetweil hi sorry but i am stuck config.js is empty and cant find text editor
-
-
totally totally out of my depth and do not understand why my config.js is empty and why the text editor is missing.sorry
-
@sdetweil hi i think i am back on track.you say to cut,is that the same as copy,because when i right click on your config all i see is copy.cheers
-
@geo cut/paste is the generic term for the operations of marking the source, and transferring it to the destination
copy is the non destructive form of cut
-
geo
this is what i have
/* Magic Mirror Config Sample * * By Michael Teeuw http://michaelteeuw.nl * MIT Licensed. */* * * By Michael Teeuw http://michaelteeuw.nl * MIT Licensed. * * For more information how you can configurate this file * See https://github.com/MichMich/MagicMirror#configuration/* * * By Michael Teeuw http://michaelteeuw.nl * MIT Licensed. * * For more information how you can configurate this file * See https://github.com/MichMich/MagicMirror#configuration * */ var config = { address: "localhost", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "", "0.0.0.0", "::" to listen on any interface // Default, when address config is left out, is "localhost" port: 8080, ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], language: "en", timeFormat: 24, units: "metric", modules: [ { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: "calendar", header: "GB Holidays", position: "top_left", config: { calendars: [ { symbol: "calendar-check", url: "webcal://www.calendar/embed?src=en.uk%23holiday%40group.v.calendar.google.com" } ] } }, { module: "compliments", position: "lower_third" }, { module: "currentweather", position: "top_right", config: { location: "", locationID: "53.9576", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city appid: "76b503a29647f3a01dd9ba1055daea6d", } }, { module: "weatherforecast", position: "top_right", header: "Weather Forecast", config: { location: "", locationID: "53.9576", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city appid: "76b503a29647f3a01dd9ba1055daea6d", } }, { module: "newsfeed", position: "bottom_bar", config: { feeds: [ { title: "BBC", url: "http://WWW.BBC.com/services/xml/rss/bbc/HomePage.xml", } ], showSourceTitle: true, showPublishDate: true, broadcastNewsFeeds: false, broadcastNewsUpdates: true, } }, ] }; -
@geo ok… does it work?
-
@sdetweil no
-
hi i thought i had managed to copy the config you sent but obviosly not as mirror still will not open ,cheers
-
I will make it works dont worry!
First reinstall:
1- Run this command:
sudo rm -R MagicMirror
(that will rmove the Magic mirror from your system.
2- Run this command:
bash -c “$(curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh)”
to install the new MagicMirror again.
3- make sure the config .js is there if not
run this command
nano MagicMirror/config/config.js
then copy between lines:/* Magic Mirror Config Sample * * By Michael Teeuw http://michaelteeuw.nl * MIT Licensed. * * For more information how you can configurate this file * See https://github.com/MichMich/MagicMirror#configuration * */ var config = { address: "localhost", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "", "0.0.0.0", "::" to listen on any interface // Default, when address config is left out, is "localhost" port: 8080, ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"], // Set [] to allow all IP addresses // or add a specific IPv4 of 192.168.1.5 : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.1.5"], // or IPv4 range of 192.168.3.0 --> 192.168.3.15 use CIDR format : // ["127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.3.0/28"], language: "en", timeFormat: 24, units: "metric", modules: [ { module: "alert", }, { module: "updatenotification", position: "top_bar" }, { module: "clock", position: "top_left" }, { module: "calendar", header: "US Holidays", position: "top_left", config: { calendars: [ { symbol: "calendar-check", url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics" } ] } }, { module: "compliments", position: "lower_third" }, { module: "currentweather", position: "top_right", config: { location: "New York", locationID: "", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city appid: "YOUR_OPENWEATHER_API_KEY" } }, { module: "weatherforecast", position: "top_right", header: "Weather Forecast", config: { location: "New York", locationID: "5128581", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city appid: "YOUR_OPENWEATHER_API_KEY" } }, { module: "newsfeed", position: "bottom_bar", config: { feeds: [ { title: "New York Times", url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml" } ], showSourceTitle: true, showPublishDate: true, broadcastNewsFeeds: true, broadcastNewsUpdates: true } }, ] }; /*************** DO NOT EDIT THE LINE BELOW ***************/ if (typeof module !== "undefined") {module.exports = config;}
end: dont copy the line above ( you can fin the file in config dirctory under the name of config.js.sample. Just save it as config.js without sample)
4- start your Magic Mirror
First: cd MagicMirror
(to navigate to the Magic Mirror dirctory)
second run : npm start
Check if it works!I will be helping you step by step even if you wants to add some modules.
Good luck!!!
-
@La7dan please use the updated installer
see https://forum.magicmirror.builders/topic/10171/anyone-want-to-try-updated-installer
it will be part of the next release
-
Please read and use this guide regarding posting code on the forum. Peace!
https://forum.magicmirror.builders/topic/4247/how-to-post-code-on-the-forum-for-absolute-beginners
-
@La7dan hi the mirror is up and running.the next problem is to have the weather and news modules changed to Gb
-
Cannot express this enough… if you have a working config make a copy of it before you make changes that way you can either
a. compare the working with the non-working config
or
b. switch back to the working config.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login