Regions

doubleT

You’re welcome.
Btw. depending on how you control your Pi and Mirror, you don’t need to restart your whole Pi. In this case, just refreshing the browser should work, or restarting the Mirror process, if it doesn’t.

WayneRigley

Hi all, well after countless trying ive given up and now asking for help. my MM is working perfect and the only troubling issue in my top_right section, i have a few things in there under the config but i would like to extend the left border of my top_right a little more left if thats possible. i have too much open space from the center to the right side. i will not be resizing fonts using the shift+ +/- any longer so that wont be an issue is manually adjusted. thanks all in advance and have a look here what im refering to
https://photos.app.goo.gl/EUWdJRQwAjKJksx46

Fifin404

Hi all, is there any way to change outer border around modules? Make it smaller?

Fozi

Im main.css you can change the margin, heightand width under ‚body’ as you need. Here are my values I adjusted. The default values are commented.

body {
  /* margin: 60px; */
  margin: 5px; 
  position: absolute;
  /*height: calc(100% - 120px);
  width: calc(100% - 120px);*/
  height: calc(100% - 10px);
  width: calc(100% - 10px);

Fifin404

Thank you, that is what I looking for.

Mykle1

@Fozi said in Regions:

Im main.css you can change

Encouraging people to modify their main.css is really not a good idea, especially for those that are new to MM and/or linux.

Please direct your help towards the custom.css file which is intended for just such modifications.

Peace

-A concerned citizen-

drwatson

Good point, @Mykle1

Can you then suggest the equivalent change to make the proper way without modifying the main.css?

cskenney

@drwatson Copy the exact same code that @Fozi noted above and put it in the custom.css file.

Below is what I put in my custom.css file.

body {
  margin: 5px;
  position: absolute;
  height: calc(100% - 10px);
  width: calc(100% - 10px);
}

BKeyport

This post is deleted!

Fozi

@Mykle1 ouh damned…your concerns are absolutely justified. Haven’t hought of that. Thanks for pointing me to that.:thumbs_up_light_skin_tone:

Fifin404

Yes I added code to custom.css not main.css. Thanks for all

Mykle1

@drwatson @Fozi

Can you then suggest the equivalent change to make the proper way without modifying the main.css?

Well, any changes that you consider making in the main.css can be made in the custom.css file without changing the main.css file. The custom.css file will override what is in the main.css file. This way you’re not altering any core files and your modifications will be accepted. When it’s time to upgrade to a newer version of MM the upgrade won’t abort because of changes you’ve made to the core files and your custom.css changes will survive the upgrade. :-)

I’m still learning things every day and I enjoy the process. That’s the whole point for me.

Peace!

cowboysdude

Yes I would HIGHLY suggest you do not change the main.css file… that could send other modules or positions in to chaos. Use the custom css as Mykle1 suggested :)

toots

Sorry if this has been asked. Is there a way to do left_side and right_side? I’m displaying my mirror on a chromecast so it’s locked into landscape mode at 720p and there isn’t a whole lot of room for each of the regions. I’d rather replace top_left and bottom_left with left_side, and just use the entire edge.

sdetweil

@toots u could edit the index.html to add your left/right locations, and add entries to custom.css for them

megagprime

hi all, how could i center this kodi-websocket module between these two?

using bottom left for map, bottom center for kodi websocket and bottom right for wind

i tried custom.css module placement but did not work

.module.MMM-Kodi-WebSocket{
left : 600 px,
}

pastormingle

can you position left middle?

sdetweil

@pastormingle no, not a valid position

here is the list from the MM doc

https://docs.magicmirror.builders/modules/configuration.html#module-configuration

roth_nj

im just diving into this project (mech eng with very limited programming experience)

i have the MM installed and running on my mac using terminal/electron. ive been in the config editing it and taking out stuff i dont want and added CalendarExt3 and have that working. im doing it on my mac for now waiting on my PI to come in the mail. from what ive read it will also speed up the editing phase vs pop it into the pi over and over.

im about to start digging into size/area/color/font/etc and have a combo of questions:

the picture posted in the start of this thread is very helpful for the zones. i want to run mine in landscape view. will those zones be the same in landscape vs portrait? i can’t tell if it is because i haven’t configured it properly for my monitors or if it needs to be adjusted (portrait to landscape). if so, is there another version of the same picture but in the other orientation?

sorry if these are self explanatory questions once i dive into it more just wanted to ask to help the process

sdetweil

@roth_nj The regions will be the same but obviously the sizes will be different

You can do the same color view by adding a background color to each one of the regions in custom CSS and then you can see where they are