MMM-HomeAssistant-Sensors (Development) - Show your HA Sensors on your Mirror

[RdP]

@RaspiManu

I did use a dummy token

[JohnBachini]

@RdP anything in the logs of home assistant ?

I use this module and does work.

[RdP]

@JohnBachini said in MMM-HomeAssistant-Sensors (Development) - Show your HA Sensors on your Mirror:

@RdP anything in the logs of home assistant ?

I use this module and does work.

Nothing in the HA logs :-(

[RdP]

@RdP said in MMM-HomeAssistant-Sensors (Development) - Show your HA Sensors on your Mirror:

I get an error:

My config is like this:

{
	module: 'MMM-homeassistant-sensors',
	position: 'top_left',
	config: {
		host: "192.168.0.185",
		port: "8123",
		https: false,
		token: "eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpiJmMmVQ4ODM0NzViYmQ4NzdlZTdlYmsImlhdCI6MTU5MjM5NjYxOSwiZXhwIjoxOTA3NzU2NjE5fQ.CxGIZP-TPWWZAFuNx3UV-sucjg8j8885ia00gCiG4vGg",
		values: [
			{
				sensor: "sensor.jacuzzi_temperatuur",
			},
		]
	    }
    },

Any help is more than welcome

Bump… Is there anyone who can point me in the right direction?

[sdetweil]

@RdP I don’t know anything about module, just asking questions

it was working and stopped? or is this the 1st time?

if u look at the logs (console, npm start, pm2 logs) or the developers window, ctrl-shift-i, select the console tab and scroll up to see any errors, usually red text, do you see anything?

[smoysauce]

Love this module, I am just trying to figure out if it possible to merge the attribute pieces from this fork: https://github.com/moejetz/MMM-homeassistant-sensors with this one: to allow adding attributes. I’m trying to read up on how to do it, but not sure if it’s a lot of work to do or if there is an easy way to do it. I’m also checking for any guidance in the help forum. Any help would be appreciated!

[NLCarrII]

@RdP

I had this last night and I got frustrated and shutdown the mirror and re-opened it via terminal and it worked. I only tested with one sensor. Then I added another sensor and I didn’t have to restart to have it show it up. Not sure what changed, but this might work for you. Something else I did was not install the right one TWICE, I instralled them as they appeared in the list on Github and found out about their issues, which caused me to install the next one and so on. At least I got experience installing modules. This was the last one I installed and I have a lock and a sensor displaying now. More to Come.

[Karlberg]

i have the same problem. It never worked. I hassio i got “Login attempt failed
Login attempt or request with invalid authentication from raspberrypi (192.168.16.71)”

so something is wrong with this module.

[Snille]

@Karlberg Hi, the module should be working. It sounds like you have something wrong with the token if HA reports failed logins…

[Karlberg]

This post is deleted!

[Karlberg]

@Snille Yes something was wrong. its working with another token

[Snille]

@Karlberg Great! :)

[fribse]

@Snille Looks very nice, good job!

[vageesh79]

anyway to use https with self signed. I am getting error "“Error Fetching Stats”. No error on homeassistant and MM

[bachoo786]

@karlberg hey man thanks for the module. However I am getting “Error fetching stats” there is no error in HA.

Can you please help? thnaks

[Snille]

@bachoo786 Hi, I’m using the module and it’s working. It may be that the “request” module is missing? Have you installed it?
Go the to the module folder and do

npm init

&

npm install request

Let me know if it works.

[hedmik]

@snille Hi, trying to use this module but getting below error.
I followed your instructions i hope :-)
[07.01.2022 17:10.13.062] [ERROR] (node:30547) UnhandledPromiseRejectionWarning: TypeError: Cannot read properties of undefined (reading ‘body’)
at /home/pi/MagicMirror/modules/MMM-homeassistant-sensors/node_helper.js:40:83
at runMicrotasks ()
at processTicksAndRejections (node:internal/process/task_queues:96:5)
[07.01.2022 17:10.13.067] [ERROR] (node:30547) UnhandledPromiseRejectionWarning: Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). To terminate the node process on unhandled promise rejection, use the CLI flag --unhandled-rejections=strict (see https://nodejs.org/api/cli.html#cli_unhandled_rejections_mode). (rejection id: 46)

[cowboysdude]

@hedmik Been trying to get it to work for a couple weeks now… no luck for me either… @Snille where you at? LOL

[sdetweil]

@cowboysdude that error doesn’t line up with the code on GitHub

line 40 col 83 is inside a routine making the url string, not handling a request response

so, what code is actually being run?

[hedmik]

@sdetweil my code looks like this, perhaps it’s a need for an update…?