MMM-NOAA

[WayneRigley]

@mykle1 im hanging on the side till the new release… thanks for the heads up

[core]

Hi,

@idoodler thanks for your help, I will try it!

@Mykle1 I know that CBD is currently working on an update for this module and I understand that this is very time consuming. I think I will wait for the new version :)
With regard to CBD question: I wrote him (see my prevoius post) that I am using the latest version of this module (V 2.1.7).

@core said in MMM-NOAA:

Thanks all for your help!

@idoodler I deleted MMM-Fuel from my config.js. Nothing changed, the other modules mentioned before won‘t work…this seems to be a problem with MMM-NOAA „blocking“ other modules.

@cowboysdude I run the latest version, even tried a re-installation. I adjusted the config to the current version, i.e only using apiKey and airKey as shwon in the readme.

Any more ideas…?

Best regards!

[Mykle1]

@core said in MMM-NOAA:

I wrote him (see my prevoius post) that I am using the latest version of this module (V 2.1.7).

Yes, you did. My bad.

[ganther]

Same behavior with my mirror.
After latest MMM-NOAA update my MMM-CalendarExt doesn‘t work anymore. No errors in logs.
I was forced to deactivate NOAA. :(

[evroom]

Hi,

I installed MMM-NOAA V2.0 just now, but the lines necessary in the config.js struck me as being too little.

No ‘position’, etc, just the api’s.
I read that it takes:

language: “en”,
timeFormat: 24,
units: “metric”,

from the config.js, but then still I am missing info like ‘location’, ‘locationID’, etc.
How does it know which city to take ?
What weather information is currently displayed ? England due to “en” ? :-)

In github I read:

“In this new Version you can select up to 3 different weather locations like in this example.”

but I fail to see this.

Could you please provide me with a correct config.js entry for this otherwise good looking module ??

And airvisual.com refuses to give me api (does not send me the confirmation mail), but that not a fault of the module.

Best regards,

Erik-Jan

[Mykle1]

@evroom

This is from the readme.

{
    disabled: false,
    module: 'MMM-NOAA',
    position: 'top_right',
    config: {
	apiKey: "YOUR API KEY",    // https://www.wunderground.com/weather/api  select the middle plan... 	 
	airKey: "YOUR API KEY",    // IF you want Air Quality Index
	pws: "KNYELMIR13",         // go here to find your pws: https://www.wunderground.com/wundermap		 
}
},

And this is mine

{
            disabled: false,
            module: 'MMM-NOAA',
            position: 'top_left',
            config: {
                apiKey: "MY API KEY", // https://www.wunderground.com/weather/api  select the middle plan... 
                airKey: "MY AIR KEY", // IF you want Air Quality Index
                pws1: "KNYNEWYO103", // go here to find your pws: https://www.wunderground.com/wundermap
                animationSpeed: 0,
        }
        },

[cowboysdude]

@evroom Yes that used to be true…the readme is wrong, sorry. The old weather used to be wunderground and since they quit their free api I had to use a different provider and it works for one location only.

There is no longer a need to use “PWS”…as the new api doesn’t use that. That’s an old wunderground requirement.

At the moment this is all that’s required to make it work…

{
            disabled: false,
            module: 'MMM-NOAA',
            position: 'top_left',
            config: {
            	apiKey: "xxxxxx",
		airKey: "xxxxx"
			}
         },

I am also working to eliminate the airKey in that version…

[evroom]

@cowboysdude
Thanks for answering (@Mykle1 too).
It is working, with just the apiKey in the config, but where does it take the location from?
You say it works for one location only, is that a location I can determine, or is it a location that is hard coded somewhere?
I like the temperatures it is showing, but is the weather I can expect in my location? :-)

[Mykle1]

@evroom

Ok, my bad on my previous answer. My apologies. :-/

At the risk of answering in error again, I will say that the module determines your location (geo-location or some such)

[cowboysdude]

@evroom It automatically gets the latitude and longitude and uses that :)

[evroom]

Okay, I see it uses http://ip-api.com/json to determine latitude and longitude.
It is depending on the proxy server in use.
I am at work now (in Germany) and I see my proxy server is located in Paris, France right now.
Will try it at home to see for which location the weather is presented on my MM.

[evroom]

It appears to use the data from the proxy provider.
In my case the latitude and longitude are 67 kilometres away from my real location.
Also the “city” does not correspond with the “lat” and “lon” when I look them up in Google Maps.
Probably the “city” is from my provider and the “lat” and “lon” from the proxy server of that provider.
Therefore I decided to give MMM-YrThen a try, which looks nice.
Sorry to the persons that put so much efford in MMM-NOAA.

[strawberry 3.141]

there should be the possibility to set the lat and lon yourself, maybe someone is also interested in a weather at a different location. Only if no lat lon was provided you should try to get it via this ip api provider

[bhepler]

I’ve been trying to get this module to work and for the life of me I can’t get it to show up. I’ve gone as minimalist as I can and it’s still not appearing.

Here’s my config:

{
     module: "MMM-NOAA",
     position: "top_right",
     config: {
          apiKey: "debxxxxxx",
          airKey: "Fpyyyyy"
     }
},

Here’s the error that I see in the web browser:

TypeError: "allDay is undefined"
getDomhttp://10.0.0.10:8080/modules/MMM-NOAA//MMM-NOAA.js:344:2
updateDomhttp://10.0.0.10:8080/js/main.js:110:28
updateDomhttp://10.0.0.10:8080/js/main.js:109:10
createDomObjectshttp://10.0.0.10:8080/js/main.js:53:29
createDomObjectshttp://10.0.0.10:8080/js/main.js:24:3
modulesStartedhttp://10.0.0.10:8080/js/main.js:471:4
startModuleshttp://10.0.0.10:8080/js/loader.js:59:3
loadNextModulehttp://10.0.0.10:8080/js/loader.js:40:6
onloadhttp://10.0.0.10:8080/js/loader.js:203:42

And I keep seeing this in the pm2 logs:

0|MagicMir | libGL error: MESA-LOADER: failed to retrieve device information
0|MagicMir | MESA-LOADER: failed to retrieve device information
0|MagicMir | MESA-LOADER: failed to retrieve device information

[Hein-Jan]

@bhepler

As far as I can tell the

libGL error: MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information

Is due to the Open GL driver. I am using the Fake KMS and these are mine errors. I am not using NOAA.

[rickelmund]

@evroom said in MMM-NOAA:

server is located in Paris, France

Well. Stumbled on this just now and same thing for me. But I don’t understand as https://www.abstractapi.com/ip-geolocation-api returns Sweden for me… How is that even possible

[Mykle1]

@rickelmund

You don’t have to use geolocation at all. I use my latitude and longitude and it fires right up. The module does error in the terminal, but only once. Then it performs as expected with no further errors.

[rickelmund]

@Mykle1 Interesting! Thank you. Let me try that out.

[harney]

My question is a little different. After trying so many weather modules and looking for one that works accurately he in West Aus, NOAA was the firrst to actually work with some accuracy. Most of the others the API’s are now defunct. I use my MagicMirror on a 7inch Raspberry screen manly as an information screen of the weather and some server stats. At the moment I am trying to get this moduel to fit on the screen as the screen resolution is fixed.

My question is which file holds the code for the section headings. I figure if I take them out and just have the date and icons, the module will fit perfectly on the small screen, then I can desing the other modules to fit in the space left.

Thanks in Advance