Just an FYI - I tried it today and it played the video first time, with no issues on an RPI 4. It would appear that something has changed in the default Buster installation.

@camshell said in Replace LCD control board component?: What does the jumper block do allow someone to change operating characteristics… no idea what THIS one does… just pins onto the circuit board… the jumper makes some connection between the two pins. or the others etc… no idea what it does here without a board circuit diagram… you could have burned the circuit board connections under the jumper block… none of us will know (unless u accidentally found the people that designed and built the board. shortest path is find another like monitor to get the board, or find another monitor

@Pielo said in what Error is this: Kann ein Profi, wie sie es sind, sich evtl vorstellen, was da die Ursache sein kann? ist an meiner Vorgehensweise etwas nicht richtig? Beginnen Sie von vorne und verwenden Sie das automatisierte Skript. Den Befehl zum Kopieren / Einfügen finden Sie hier unter https://github.com/sdetweil/MagicMirror_scripts dann haben Sie keines dieser Probleme english for others start over and use the automated script … see here https://github.com/sdetweil/MagicMirror_scripts for the command to copy / paste then you won’t have any of these problems

My stupid thing is talking in Chinese or Japanese and i cant see where to change it to English all my settings are set to English in the pi and and MM config https://www.hellotech.com/guide/for/how-to-change-alexa-voice even did what that says still Japanese haha

@Mykle1 ok i’m retest it

I think the problem was somewhere in my mailserver. After a reboot all the appointments magicly reappeared. Thank you for responding.

Hi guys, would like to check again if anybody can help on my described topic to trigger the MMM-Podcast2 with the Fire TV Remote? Best regards Bill

@Bugsounet OK thanks.

@mcretu Hi . Lost in the Post. I think you refer to youtube not being displayed. If that is the case, as @Bugsounet keeps saying (he said it to me about this…), red the wiki. It’s all there. you need to change the config.js in config as follows: https://github.com/bugsounet/MMM-Assistant2Display/wiki/Configuration Assistant2Display need electron special configuration for web link displaying and Youtube functionality start of the config.js configuration file var config = { address: "localhost", electronOptions: { webPreferences: { webviewTag: true } }, port: 8080, ... address should be localhost for playing YouTube video electronOptions is need if you want to display the link and Cast module

Hello everyone First of all Thank you so much for this amazing system, it is amazing to see what beautiful things you can do with it, many thanks to all the developers. I’m new here so I apologize if the question is unclear or my English is not the best. The system works on RPI4 4GB When I ask a question the google assistant it’s responds very slowly, sometimes getting stuck and not understanding what I asked, but when I remove the MMM-Face-Reco-DNN from theconfig.js then google assistant works perfectly without any problems. i have the same problem with the older module MMM AssistantMk2 i can’t see any error when run npm run start dev Does anyone have the same problem? I am attaching logs that can help you help me, thank you very much in advance kobi pi@raspberrypi:~/MagicMirror $ npm run start dev > magicmirror@2.11.0 start /home/pi/MagicMirror > DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js "dev" [2020-06-06 01:45:36.510] [LOG] Starting MagicMirror: v2.11.0 [2020-06-06 01:45:36.517] [LOG] Loading config ... [2020-06-06 01:45:36.522] [LOG] Loading module helpers ... [2020-06-06 01:45:36.527] [LOG] No helper found for module: alert. [2020-06-06 01:45:36.568] [LOG] Initializing new module helper ... [2020-06-06 01:45:36.569] [LOG] Module helper loaded: updatenotification [2020-06-06 01:45:36.570] [LOG] No helper found for module: clock. [2020-06-06 01:45:36.993] [LOG] Initializing new module helper ... [2020-06-06 01:45:36.994] [LOG] Module helper loaded: calendar [2020-06-06 01:45:36.995] [LOG] No helper found for module: compliments. [2020-06-06 01:45:37.024] [LOG] Initializing new module helper ... [2020-06-06 01:45:37.025] [LOG] Module helper loaded: newsfeed [2020-06-06 01:45:38.150] [LOG] Initializing new module helper ... [2020-06-06 01:45:38.151] [LOG] Module helper loaded: MMM-GoogleAssistant [2020-06-06 01:45:38.151] [LOG] All module helpers loaded. [2020-06-06 01:45:38.284] [LOG] Starting server on port 8080 ... [2020-06-06 01:45:38.300] [LOG] Server started ... [2020-06-06 01:45:38.301] [LOG] Connecting socket for: updatenotification [2020-06-06 01:45:38.302] [LOG] Connecting socket for: calendar [2020-06-06 01:45:38.303] [LOG] Starting node helper for: calendar [2020-06-06 01:45:38.303] [LOG] Connecting socket for: newsfeed [2020-06-06 01:45:38.304] [LOG] Starting module: newsfeed [2020-06-06 01:45:38.304] [LOG] Connecting socket for: MMM-GoogleAssistant [2020-06-06 01:45:38.305] [LOG] Sockets connected & modules started ... [2020-06-06 01:45:38.405] [LOG] Launching application. [2020-06-06 01:45:43.204] [LOG] Create new calendar fetcher for url: http://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics - Interval: 300000 [2020-06-06 01:45:43.268] [LOG] Create new news fetcher for url: http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml - Interval: 300000 [2020-06-06 01:45:43.426] [LOG] [ASSISTANT] MMM-GoogleAssistant Version: 2.0.0 [2020-06-06 01:45:43.430] [LOG] [SNOWBOY] Model selected: jarvis [2020-06-06 01:45:43.435] [LOG] [SNOWBOY] snowboy v1.5.0 Initialized... [2020-06-06 01:45:43.450] [LOG] [ASSISTANT] RECIPE_LOADED: with-MMM-TelegramBot.js [2020-06-06 01:45:43.452] [LOG] [ASSISTANT] Google Assistant is initialized. [2020-06-06 01:47:08.720] [LOG] Shutting down server... [2020-06-06 01:47:08.721] [LOG] Stopping module helper: updatenotification [2020-06-06 01:47:08.722] [LOG] Stopping module helper: calendar [2020-06-06 01:47:08.722] [LOG] Stopping module helper: newsfeed [2020-06-06 01:47:08.723] [LOG] Stopping module helper: MMM-GoogleAssistant part of my config.js { module: "MMM-GoogleAssistant", position: "fullscreen_above", classes: 'default everyone', config: { debug: false, assistantConfig: { lang: "en-US", projectId: "", // Required to use gaction. modelId: "", // (OPTIONAL for gaction) instanceId: "", // (OPTIONAL for gaction) latitude: 51.508530, longitude: -0.076132, }, responseConfig: { useScreenOutput: true, screenOutputCSS: "screen_output.css", screenOutputTimer: 5000, activateDelay: 250, useAudioOutput: true, useChime: true, newChime: false // !!!DEV!!! }, micConfig: { // put there configuration generated by auto-installer recorder: "arecord", device: "plughw:3", }, customActionConfig: { autoMakeAction: false, autoUpdateAction: false, // in RPI, gaction CLI might have some trouble.(current version should be 2.2.4, but for linux-arm, Google haven't updated) so leave this as false in RPI. I don't know it is solved or not. actionLocale: "en-US", // At this moment, multi-languages are not supported, sorry. Someday I'll work. }, snowboy: { audioGain: 2.0, Frontend: true, Model: "jarvis", Sensitivity: null }, snowboy: { audioGain: 2.0, Frontend: true, Model: "jarvis", Sensitivity: null }, A2DServer: { useA2D: false, stopCommand: "stop" }, recipes: [ "with-MMM-TelegramBot.js" ] } }, { module: 'MMM-Face-Reco-DNN', classes: 'default everyone', config: { // Logout 15 seconds after user was not detected any more // If they are detected within this period, the delay will start again logoutDelay: 15000, // How often the recognition starts in milliseconds // With a Raspberry Pi 3+ it works well every 2 seconds checkInterval: 2000, // Module set used for strangers or if no user is detected defaultClass: 'default', // Set of modules which should be shown for every recognised user everyoneClass: 'everyone', // XML to recognize with haarcascade cascade: 'modules/MMM-Face-Reco-DNN/tools/haarcascade_frontalface_default.xml', // Pre-encoded pickle with the faces encodings: 'modules/MMM-Face-Reco-DNN/tools/encodings.pickle', // Use Raspberry Pi camera or another type // 1 = RasPi camera, 0 = other camera usePiCamera: 0, // Rotate camera rotateCamera: 0, // Method of facial recognition // dnn = deep neural network, haar = haarcascade method: 'dnn', // Which face detection model to use // "hog" is less accurate but faster on CPUs // "cnn" is a more accurate deep-learning model which is GPU/CUDA accelerated detectionMethod: 'hog', // How long in milliseconds modules take to hide and show animationSpeed: 0, // Path to Python to run the face recognition // null or '' means default path pythonPath: null, // Should a welcome message be shown using the MagicMirror alerts module? welcomeMessage: true, // Capture new pictures of recognized people, if unknown we save it in folder "unknown" // So you can extend your dataset and retrain it afterwards for better recognitions extendDataset: false, // If extendDataset is true, you need to set the full path of the dataset dataset: 'modules/MMM-Face-Reco-DNN/dataset/' } }

um. That’s a DNS error. Basically “Try again later” – Might wanna try a new OS install on a new card, and if that don’t work, you’ve got some slightly burned hardware.

Has anyone had any luck adding publicly available google calendars to either of the modules I have listed in the title? I’ve tried using this guy’s advice on how to create an .ics from the “calendar ID” available from google calendars but i’m getting errors. [image: 1591327745163-annotation-2020-06-04-212851.png] Any help would be appreciated. Thanks!

No no all good. It worked like a charm! Many thanks!

looks like you didn’t run the npm install step of the module install I’d suggest getting the new module MMM-GoogleAssistant that came out just this week. it replaces both old modules and it much easier to install. https://forum.magicmirror.builders/topic/12324/mmm-googleassistant?_=1591203920585

Hi, I have position: 'fullscreen_above', but I do not see the complete dashboard. I can scroll the dashboard up and down, but I would like to see the complete dashboard on my MM display. Is this a Grafana issue, or a MMM-GrafanaChart issue ? With kind regards, @evroom See GitHub issue: https://github.com/SvenSommer/MMM-GrafanaChart/issues/8

Ok, scratch that, Mycommute seems to be working again ( l literally just tried re-enabling it, I have no idea what made it work again). Kudos :) I’m not sure how to close a topic, but please consider this closed.

@blacter said in Sorry. One more...: /home/pi/package.json have to be IN the MagicMirror folder before u can do anything with npm commands /home/pi/package.json if u meant to use pm2, then it would have been ok anywhere pm2 restart MagicMirror

Thanks. Appreciate the help.

@sdetweil Thank you! That one is edited for the forum actually, but anyway, you solved my problem ;)

i don’t understand that these scripts can be used to automate installation of release upgrades. raspberry.sh is the installation script, upgraded from the core package to execute the install script, cut/paste this line into the terminal window on your device (I can't say PI, cause it works in a lot of other places too) bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)”