@randomnoise Great! Thank you, now it works as intended again :)

Hi everyone! I’ve been trying to install MM on a Raspberry Pi Model B for a couple of days now and it seems like it’s finally working, but not fully. I don’t have the Raspi always connected to a monitor, but since I was going for the serveronly mode I’m working through SSH with Putty. The MM manual installation worked well, it finished without errors, all the other scripts (sideway display) work too. Now each time I start MM with \node serveronly\ I get this: Starting MagicMirror: v2.1.2 Loading config ... Loading module helpers ... No helper found for module: alert. Initializing new module helper ... Module helper loaded: updatenotification No helper found for module: clock. Initializing new module helper ... Module helper loaded: calendar No helper found for module: compliments. No helper found for module: currentweather. No helper found for module: weatherforecast. Initializing new module helper ... Module helper loaded: newsfeed All module helpers loaded. Starting server on port 8080 ... Server started ... Connecting socket for: updatenotification Connecting socket for: calendar Starting node helper for: calendar Connecting socket for: newsfeed Starting module: newsfeed Sockets connected & modules started ... Ready to go! Please point your browser to: http://localhost:8080 Which should mean that it’s up and running, right? So I head over to my browser but all I see is a black screen. I know that the Raspberry Model B is not supported, but I thought maybe someone, somewhere has an explanation or a way to fix it.

@Sean It worked! Thanks! Time to continue on the other modules.

Hi, I have very little web development experience so this is all very new to me. I am trying to change the positions of the modules around with no avail. I am trying to change the compliment from position ‘lower_third’ to ‘bottom center’ which should be right above the news feed. I have not been able to do this. In fact, I have no been able to move ANY modules around using the position in the config.js.sample file. Also, the calender is default ‘bottom left’ but on my TV, it appears that it is in the ‘top_left’ right underneath the clock module. What is going on!? Can someone fundamentally explain positioning in that: Why am I having these issues How can I change positioning of modules Where can I change the sizes of the modules

@Snille said in help with updating MM: You can also “stash” your changes with git stash -u Then if you want you can reapply your changes again after updating with git stash pop Or, you can just “kill” the changes with git clean -f But then you WILL loose what you have edited in the files for ever! "I’m not sure what if anything i changed . . . "

@Lange said in Editing files on Windows through SD-adapter.: @kevinaf notepad++ for editing on the windows mashine My son uses Atom, but I swear by Notepad++

These are not errors but known warnings. What is your problem, doesn’t it work and what doesn’t work because this is probably not a blocking installation error.

nevermind, i gave up now and reinstalling the whole stuff :/

Your white list is wrong ::ffff: is an IPv6 loopback, you’ve combined it with an IPv4 address “192.168.1.1/24” should be a separate line

Deleted - I’d misread your question.

@yours.mukul These old eyes can’t see that. You’d be better off copying and pasting the actual code here, using this guide. https://forum.magicmirror.builders/topic/4247/how-to-post-code-on-the-forum-for-absolute-beginners FYI, some warnings can be ignored and the mirror will run despite them. Have you tried to run the mirror?

I’m curious. Did you even try or look at this? https://forum.magicmirror.builders/topic/4528/how-to-create-a-working-config-for-absolute-beginners

@fasyr with the automatic installer those should be replaced with the magicmirror logo https://github.com/MichMich/MagicMirror/blob/master/splashscreen/splash.png

thats great to hear :-) wish you much fun with your mirror

iCloud Calender stopped working for me since last update used same option to publish the calender and used the link format like https://p57-calendars… error log: mm-0 (err): at Request._callback (/home/pi/MagicMirror/modules/default/calendar/vendor/ical.js/node-ical.js:11:5) mm-0 (err): at Request.self.callback (/home/pi/MagicMirror/node_modules/request/request.js:188:22) mm-0 (err): at emitTwo (events.js:106:13) mm-0 (err): at Request.emit (events.js:194:7) mm-0 (err): at Request.<anonymous> (/home/pi/MagicMirror/node_modules/request/request.js:1171:10) mm-0 (err): [1627:0814/180246.217060:ERROR:gles2_cmd_decoder_autogen.h(1806)] [.DisplayCompositor-0x4c39480]GL ERROR :GL_INVALID_OPERATION : GetShaderiv: <- error from previous GL command mm-0 (err): [1842:0814/183723.973230:ERROR:gles2_cmd_decoder_autogen.h(1806)] [.DisplayCompositor-0x412c480]GL ERROR :GL_INVALID_OPERATION : GetShaderiv: <- error from previous GL command mm-0 (err): [1842:0814/183725.964007:ERROR:gles2_cmd_decoder_autogen.h(1806)] [.DisplayCompositor-0x412c480]GL ERROR :GL_INVALID_OPERATION : GetShaderiv: <- error from previous GL command mm-0 (err): Error: dates lower than Thu Jan 01 1970 00:00:00 GMT+0100 (CET) are not supported mm-0 (err): at Object.toOrdinal (/home/pi/MagicMirror/node_modules/rrule-alt/lib/rrule.js:105:15) mm-0 (err): at Iterinfo.rebuild (/home/pi/MagicMirror/node_modules/rrule-alt/lib/rrule.js:1409:35) mm-0 (err): at RRule._iter (/home/pi/MagicMirror/node_modules/rrule-alt/lib/rrule.js:978:10) mm-0 (err): at RRule.between (/home/pi/MagicMirror/node_modules/rrule-alt/lib/rrule.js:794:21) mm-0 (err): at /home/pi/MagicMirror/modules/default/calendar/calendarfetcher.js:135:24 mm-0 (err): at Request._callback (/home/pi/MagicMirror/modules/default/calendar/vendor/ical.js/node-ical.js:11:5) mm-0 (err): at Request.self.callback (/home/pi/MagicMirror/node_modules/request/request.js:188:22) mm-0 (err): at emitTwo (events.js:106:13) mm-0 (err): at Request.emit (events.js:194:7) mm-0 (err): at Request.<anonymous> (/home/pi/MagicMirror/node_modules/request/request.js:1171:10) mm-0 (err): [1842:0814/183727.861692:ERROR:gles2_cmd_decoder_autogen.h(1806)] [.DisplayCompositor-0x412c480]GL ERROR :GL_INVALID_OPERATION : GetShaderiv: <- error from previous GL command

@RYANO said in I cannot get the calendar and events to show New Zealand: How do I vote I cannot see how to do this, sorry [image: 1502678343885-111.jpg]