Does anyone else use Sonarr and display its recent download history on their mirrors? It looks like the developer, @s-cotton, has been away for awhile and I can’t seem to get mine to work correctly. Re: MMM-Sonarr-Activity It’s loading up correctly and pulling data from my NAS (hosting Sonarr) but the data that it shows (currently 2 episodes) are not the most recent episodes to have been downloaded. In fact, they’re two days old at this point with about 5 - 6 episodes having been downloaded after them. I don’t see a way to configure the module’s “recently” calculations to made adjustments that way, unfortunately. Perhaps someone who knows more about Sonarr than I could chime in and let me know if that is something that can be configured on the Sonarr side of things? Anyway, thanks @s-cotton for the really cool app! I plan on installing his Radarr module later today as well.

you’re welcome. Enjoy it and have fun :D

great! that’s what I was looking for !!! thanks a lot!

Hello, How to Start/Stop motioneye from command line. Thank you.

Has anyone had any success in getting MagicMirror2 automatically starting when installed on Windows 10?

Ï fixed it my self… not reading the readme is a fault… { module: "clock", position: "top_bar", config: { timezone: "Europe/Copenhagen" } },

@Esinem said in Blank mirror?: @Lange said in Blank mirror?: npm install --unsafe-perm fixed the problem for me. Hurrah! You saved my sanity! Finally, after several days of repeated reinstalls and fiddling, it lives! Ive seen many with the problem, but no one has posted the solution. There for, always visit your old posts :D

@Gxnfr-Ali Please check out https://forum.magicmirror.builders/topic/1326/ipwhitelist-howto

Thank you so much!! That seems to have fixed it!!

I have powered the PI and monitor via a wlan socket which can be switched on/off - could this cause the problem? Regards, Chris

@fischi87 NEIN, bestimmt nicht. War viel einfacher: location: “Strehla, Germany”, aus deiner config.

Ok sounds good to me, thank you for the help! And lol @Mykle1 thats the hope

finally here’s the solution : as mentioned here, you should use this command for installation : npm install --unsafe-perm=true and now installation is succesfull!

@ryck said in Black screen after install update v2.2: cd modules/MMM-Buttons npm install electron-rebuild ./node_modules/.bin/electron-rebuild You are my hero… :)

When I try to start the wake word I get this. Is there a way to reload or check the install of kitt_ai. Alexa works when using the onscreen button otherwise. pi@raspberrypi:~ $ cd ~/Desktop/alexa-avs-sample-app/samples pi@raspberrypi:~/Desktop/alexa-avs-sample-app/samples $ cd wakeWordAgent/src && ./wakeWordAgent -e kitt_ai INFO:main: Starting Wake Word Agent INFO:WakeWordAgent: State set to IDLE(2) ALSA lib pcm_dmix.c:1052:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition ‘defaults.bluealsa.device’ ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory ALSA lib conf.c:4996:(snd_config_expand) Args evaluate error: No such file or directory ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM bluealsa ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition ‘defaults.bluealsa.device’ ALSA lib conf.c:4528:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory ALSA lib conf.c:4996:(snd_config_expand) Args evaluate error: No such file or directory ALSA lib pcm.c:2495:(snd_pcm_open_noupdate) Unknown PCM bluealsa ALSA lib pcm_dmix.c:1052:(snd_pcm_dmix_open) unable to open slave Expression ‘paInvalidSampleRate’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 2043 Expression ‘PaAlsaStreamComponent_InitialConfigure( &self->capture, inParams, self->primeBuffers, hwParamsCapture, &realSr )’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 2714 Expression ‘PaAlsaStream_Configure( stream, inputParameters, outputParameters, sampleRate, framesPerBuffer, &inputLatency, &outputLatency, &hostBufferSizeMode )’ failed in ‘src/hostapi/alsa/pa_linux_alsa.c’, line: 2838 ERROR:Failed to open PortAudio stream.Invalid sample rate ERROR:KittAiSnowboyWakeWordEngine: Initialization error:Failed to open PortAudio stream. ERROR:WakeWordAgent: exception in constructor: Failed to open PortAudio stream. ERROR:main: Exception happened: Failed to open PortAudio stream. INFO:Shutting down Wake Word Agent pi@raspberrypi:~/Desktop/alexa-avs-sample-app/samples/wakeWordAgent/src $

@broberg The apache server is for some smart home function. Has nothing to do with the MagicMirror … yet;-)

@strawberry-3.141 Thank you, mate.

So I have the same issues. I was wondering if there has been any developments on this subject over the past few months. Have any workarounds been discovered so I can finally remote access my Magic Mirror?

Yes… I am trying to uncomment the MMM-History area. With that area not included MM starts (still throwing errors messages but it works). Akismet won’t let me change my post :)

@kidddrock said in Unable to update: Hopefully it’s not too late to help save you (and others) some time and worry. I just updated my install using ‘git pull && npm install’ and it actually aborts if it detects the update will overwrite files you’ve changed (pretty awesome feature imo). Also, you don’t need to copy your main folder or even move any files elsewhere - all you need to do is rename the files it says would be overwritten with the update, and you can leave them in the same folder. For instance, it said my main.css had changes and would be overwritten. I just renamed it to main2.css and left it where it was (and did similarly to a few other files). After updating to the latest MM, I just went to the css folder, opened up that file (sudo nano main2.css), then saved it overwriting the newly updated version (saved to main.css). That’s all I did for the few files I had customized and upon restart, all of my changes were present. Good luck! Actually it wasn’t a matter of overwriting files. That I could figure out. I couldn’t even do a git pull During the automatic installation a .git file wasn’t created or initialised. Worked out in the end thought… Just a massive ball ache.