MMM-Globe

[Stoffbeuteluwe]

@chris1971 this is the link from the picture of the Earth on the eumesat webpage…

[chris1971]

yes - and now I still have the question if the picture will be updated automatically. With the old configuration (on the EUMETSAT server) I got a new picture every 15 minutes…

[Stoffbeuteluwe]

@chris1971 i hope so

[chris1971]

until now - no update… still the same picture since 2 hours…

[Mykle1]

@chris1971

If you are using . . .

ownImagePath:'https://eumetview.eumetsat.int/static-images/MSG/RGB/NATURALCOLOR/FULLRESOLUTION/IMAGESDisplay/VazIBqHF9k665',
            updateInterval: 10*60*1000

. . . then that address would need to update with a new picture for the module to retrieve and display it. If that address is a static picture then the module will only be able to display that.

[Stoffbeuteluwe]

@Mykle1 perfekt thank you …

[chris1971]

I replaced the own image path in the css with “http://gif.keraunos.org/nuageseu.gif”.
The part of the css is looking now:

‘’’
{

module: 'MMM-Globe',
position: 'middle_center',
config: {
	style: 'europeDiscNat',
	imageSize: 500,
	ownImagePath:'http://gif.keraunos.org/nuageseu.gif',
	updateInterval: 1*60*1000 // ervery 2 minutes
}

},
‘’’
It’s not a real globe, but a good animated gif for the weather forecast with clouds…

[saljoke]

I replace the URL own image path with https://eumetview.eumetsat.int/static-images/latestImages/EUMETSAT_MSG_RGBNatColourEnhncd_LowResolution.jpg
There are different of quality but is the better I found

[shgmongohh]

@saljoke
I also replaced the URL but the image doesn´t update.
Has anybody a solution, how to update the image automatically?

       ownImagePath:'https://eumetview.eumetsat.int/static-images/latestImages/EUMETSAT_MSG_RGBNatColourEnhncd_LowResolution.jpg',
        updateInterval: 10*60*1000

[sdetweil]

@shgmongohh said in MMM-Globe:

EUMETSAT_MSG_RGBNatColourEnhncd_LowResolution.jpg’

Mykle1 said

. . . then that address would need to update with a new picture for the module to retrieve and display it. If that address is a static picture then the module will only be able to display that.