MMM-Globe

Stoffbeuteluwe

@Stoffbeuteluwe ist that ok?

chris1971

Great!!!

It’s working with the link… where did you find it?

Regards, Christoph

Stoffbeuteluwe

@chris1971 this is the link from the picture of the Earth on the eumesat webpage…

chris1971

yes - and now I still have the question if the picture will be updated automatically. With the old configuration (on the EUMETSAT server) I got a new picture every 15 minutes…

Stoffbeuteluwe

@chris1971 i hope so

chris1971

until now - no update… still the same picture since 2 hours…

Mykle1

@chris1971

If you are using . . .

ownImagePath:'https://eumetview.eumetsat.int/static-images/MSG/RGB/NATURALCOLOR/FULLRESOLUTION/IMAGESDisplay/VazIBqHF9k665',
            updateInterval: 10*60*1000

. . . then that address would need to update with a new picture for the module to retrieve and display it. If that address is a static picture then the module will only be able to display that.

Stoffbeuteluwe

@Mykle1 perfekt thank you …

chris1971

I replaced the own image path in the css with “http://gif.keraunos.org/nuageseu.gif”.
The part of the css is looking now:

‘’’
{

module: 'MMM-Globe',
position: 'middle_center',
config: {
	style: 'europeDiscNat',
	imageSize: 500,
	ownImagePath:'http://gif.keraunos.org/nuageseu.gif',
	updateInterval: 1*60*1000 // ervery 2 minutes
}

},
‘’’
It’s not a real globe, but a good animated gif for the weather forecast with clouds…

saljoke

I replace the URL own image path with https://eumetview.eumetsat.int/static-images/latestImages/EUMETSAT_MSG_RGBNatColourEnhncd_LowResolution.jpg
There are different of quality but is the better I found

shgmongohh

@saljoke
I also replaced the URL but the image doesn´t update.
Has anybody a solution, how to update the image automatically?

       ownImagePath:'https://eumetview.eumetsat.int/static-images/latestImages/EUMETSAT_MSG_RGBNatColourEnhncd_LowResolution.jpg',
        updateInterval: 10*60*1000

sdetweil

@shgmongohh said in MMM-Globe:

EUMETSAT_MSG_RGBNatColourEnhncd_LowResolution.jpg’

Mykle1 said

. . . then that address would need to update with a new picture for the module to retrieve and display it. If that address is a static picture then the module will only be able to display that.

shgmongohh

@sdetweil

I don´t think that it is static. Every hour the picture is updated with the same adress.
I thought that Globe updated the picture with the update intervall.

jhoney

Cool and interesting! Im gonna try it out and see how it works.

Mykle1

@shgmongohh said in MMM-Globe:

Every hour the picture is updated with the same adress.
I thought that Globe updated the picture with the update intervall.

Well, if that is the case then it should update the image in the module. I don’t use this module. Perhaps someone that does use it will chime in with there findings, or fixes.

FlatPepsi

I see in the latest code that it is appending the date & time to avoid caching.

I’ve added a number of console log messages to the code, and it looks like it’s never refreshing. Can anyone confirm that MMM-Globe really does refresh for them, after the initial page load?

I’ve temporarily switched my mirror to MMM-iFrameReloaded, which does indeed refresh, but doesn’t scale the image to the size I need.

Stoffbeuteluwe

@FlatPepsi it is not working…

dhruvgami1989

This post is deleted!

bhepler

@dhruvgami1989 - I wonder if the globe image is pushing the upper three regions higher? I have a couple things to try, but I don’t have a solution really.

Turn off the compliments temporarily and put the globe module in lower_third.
Reduce your globe image size and see if the weather forecast reappears
Move the globe to full_screen below, which should remove it from the shuffling that comes with the module positions.

I hope one of these works for you.

Stoffbeuteluwe

@dhruvgami1989 my current weather appears after 10 minutes but I don’t know why.
Does your globe module update the Picture?
My globe module does not update.