Black screen after MM v2.4.0 update.

joela85

Black screen after updates. Followed the commands below.

sudo nano /boot/config.txt

added this to the bottom and saved.

dtoverlay=vc4-kms-v3d

then…

nano ~/.config/lxsession/LXDE-pi/autostart

added this to the bottom and saved

@xrandr --output HDMI-1 --rotate right

Then the install…

cd MagicMirror

and

sudo git pull && npm install

successful install and rebooted to see a black screen.
Have I missed anything?

yawns

According to another similar thread please set this instead:

dtoverlay=vc4-fkms-v3d (with an additional f )

joela85

Thanks for the reply, I will try that when I get home.

Charley

I also have a black screen.
Tried both options

dtoverlay=vc4-fkms-v3d

and

dtoverlay=vc4-kms-v3d

Mo

I have a similar problem, after starting the MM the screen freezes, only way to unfreeze it is to close electron. Have tried both options too.

After enabling either of the OpenGL drivers i get the followed errors:

> magicmirror@2.4.0 start /home/pi/MagicMirror
> sh run-start.sh

libGL error: MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
MESA-LOADER: failed to retrieve device information
Starting MagicMirror: v2.4.0
Loading config ...
Loading module helpers ...
No helper found for module: alert.
No helper found for module: MMM-Cursor.
Initializing new module helper ...
Module helper loaded: updatenotification
Initializing new module helper ...
Module helper loaded: MMM-Buttons
Initializing new module helper ...
Module helper loaded: MMM-DWD-WarnWeather
Initializing new module helper ...
Module helper loaded: MMM-DHT-Sensor
No helper found for module: clock.
No helper found for module: compliments.
No helper found for module: helloworld.
Initializing new module helper ...
Module helper loaded: MMM-Remote-Control
Initializing new module helper ...
Module helper loaded: MMM-MyWeather
No helper found for module: MMM-SimpleLogo.
Initializing new module helper ...
Module helper loaded: MMM-PiLights
All module helpers loaded.
Starting server on port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Connecting socket for: MMM-Buttons
Starting node helper for: MMM-Buttons
Connecting socket for: MMM-DWD-WarnWeather
MMM-DWD-WarnWeather helper started...
Connecting socket for: MMM-DHT-Sensor
MMM-DHT-Sensor helper started ...
Connecting socket for: MMM-Remote-Control
Starting node helper for: MMM-Remote-Control
Connecting socket for: MMM-MyWeather
MMM-WunderGround helper started ...
Connecting socket for: MMM-PiLights
[2018-07-03 15:42:24] [MMM-PiLights] Starting node_helper
Sockets connected & modules started ...
Launching application.
(node:1057) UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 1): TypeError: Cannot read property 'refs' of undefined
(node:1057) [DEP0018] DeprecationWarning: Unhandled promise rejections are deprecated. In the future, promise rejections that are not handled will terminate the Node.js process with a non-zero exit code.
(node:1057) UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 2): TypeError: Cannot read property 'refs' of undefined
(node:1057) UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 3): TypeError: Cannot read property 'refs' of undefined
(node:1057) UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 4): TypeError: Cannot read property 'refs' of undefined
(node:1057) UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 5): TypeError: Cannot read property 'refs' of undefined
(node:1057) UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 6): TypeError: Cannot read property 'refs' of undefined
(node:1057) UnhandledPromiseRejectionWarning: Unhandled promise rejection (rejection id: 7): TypeError: Cannot read property 'refs' of undefined

Edit: MM works without any OpenGL Drivers, but CPU usage is pretty high and the Node errors are still there.

A Former User

After 2.4.0, Asus Tinker Board cannot display MM. I think it might be related with this openGL issues. Is there any way to solve this?
ATB has no openGL desktop driver like vc4-kms-v3d. Fake vc4-kms-v3d does not help.

joela85

I can’t access my mirror remotely anymore. Will I need to format my sd card and try again?

Kastore

I am having the same issues and tried alot right now.

Tried the
dtoverlay=vc4-fkms-v3d as well as dtoverlay=vc4-kms-v3d as well as deleting that phrase

I downgraded electron to npm install electron@1.4.15 since i found that helped in the V2.30 problems.

I cant currently show the log from starting MagicMirror since i remotly access it and the MM just goes “all black” over the remote-access-page and I cant close it.

I really just want to downgrad the MM to 2.3 since it worked absolutly fine with it…

Additional software I use is MM-PIR

Mykle1

@kastore

https://github.com/MichMich/MagicMirror/releases

Kastore

@mykle1
Thanks Mykle1
Just how do i tell my pi to get the specific version? I am not versed in programming or coding or anything and couldnt find something online that told me how to install a specific version