@sdetweil

Thank you Sam. I’ll check this out:)

@sdetweil

and Sam for the win. again.

Thanks.

@sdetweil

Thanks Sam. I reinstalled, reset the Client Secret and now is working beautifully.

@nneuland yeh, mine is listed in the ‘alternative’ section below manual

note that I have a script to disable screensaver down at the bottom too

@sdetweil

Deleting PIR from the config through the remote worked!

Thank you Sam.

@sdetweil

You’re a gentleman and a scholar!!!

@sdetweil

I’m not certain when exactly this is happening. I’m finding that one of the trains in the module disappears and comes back on it’s own.
Always seems to be long enough to notice it for a few days though.
It should always be visible, as long as there isn’t a cut in the service. Which there currently is not.

MM is always on. Although I’ve tried restarts to correct the issue

I have not seen any update on the github module page, and I am currently up to date.

I’m more looking to see if anyone using the NYC_Transit module has had any of the same issues.

Nick

If you just care about turning the TV on and off you could use a relay that triggers the power button of the TV. @cruunnerr made a guide for PIR and relay setup.

@nneuland u need to find out if your monitor will accept cec commands to turn off it’s power, instead of turning off the hdmi port.

search google for cec-client

none of mine support cec commands.

if you use an ssh connection to the pi from your other machine you can turn the hdmi port back on without rebooting

@digidadbod

That’s great. Thank you for the tip

@nneuland you should have put in custom.css… not modify module file…

cause later if the module is updated, the git pull to update will fail cause the modified file would be overwritten by the file the module owns

in custom.css just add

.modulename in front of the identifier .MMM-Discog .classname ?????? { ... .. .. }

@skuethe
That did it! Thank you so much.

SOLVED

@sdetweil

oh. thank you

@sdetweil
Thanks Sam. I would like to avoid bugging my own home, so sounds like I can do without these modules for now

N

@sdetweil
All help at the bottom of the curve is appreciated. Thank you. Cheers

@sdetweil

Thank you

@eltonnascimento
Hi. Apologize for the late response.
Not sure I would call this a fix. I reverted back to the default Current Weather module and avoided the Openmapweather module all together. For the life of me I couldn’t figure a way to show a header with the Openmapweather. However, the default Current weather worked.

Hope this helps