@Vauxdvihl
Share your custom.css and config.js with me. (eouia0819@gmail.com)

@MMRIZE
Thanks a lot
Works perfect

@MMRIZE
Doing this
Everthing runs fine
Thx

@MMRIZE
Works
Thank you

@Vauxdvihl yes, the messages say about apt install or venv

I think the author needs to fix this. please open an issue on the module github page to engage the author.

@kayakbabe
I do not check your answer
While having the default weather module running with “openweathermap” as the source for the datas, everthing runs fine.
And the default module uses according to their css file also the 2.5.

I was also switching the “MMM-OpenWeatherForecast” css to 3.0.
Nothing changed

Works
Thanks a lot

Hi friends,
among other modules i have running “MMM-CalendarExt2” and “MMM-CalendarExtPlan”.

The view from “MMM-CalendarExt2” looks like.
dfc38088-5bd1-4da6-8855-444f9964556a-grafik.png

And the view from “MMM-CalendarExtPlan” looks like:
23af0326-2c8d-409f-a9cc-0002e1811aab-grafik.png

Sometimes CalExt2 shows all the infos from the connected calendars in the config (so same among like ExtPlan), but often it “only” shows a few entries.

Maybe somebody can help me?
Thanks a lot

Uhhhh
I do not have any deep knowledge from this api stuff.
Based on covid with all this homeschooling stuff, it would be great to see in the mirror, if some of the teachers has shared some new task, attached some new homework or commented something.
Thanks

@sdetweil

let config = { address: "0.0.0.0", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8888, basePath: "/", // The URL path where MagicMirror is hosted. If you are using a Reverse proxy // you must set the sub path here. basePath must end with a / ipWhitelist: [], // Set [] to allow all IP addresses

Hi Friends,
unfortunately i have some problems with the above standing module.
It does not shows anything.
FHEM server ist located on the same device.
Using

npm start dev

does not show any error

here is my comfig

{//MMM-FHEM module: 'MMM-FHEM', position: 'top_left', config: { host: 'localhost', port: '8083', https: false, devices: [ { deviceName: 'MAX_106dd0', deviceReadings: [ { name: 'temperature', icon: 'wi wi-thermometer', suffix: '°' }, /*{ name: 'humidity', icon: 'wi wi-humidity', suffix: '%' },*/ ], }, { deviceName: 'MAX_106dd8', deviceReadings: [ { name: 'temperature', icon: 'wi wi-thermometer', suffix: '°' }, /*{ name: 'battery', icon: 'fa fa-battery-half', suffix: '' },*/ ], }, ], }, },

I know the module is not longer maintanced.
But mayby somebody can help me

Thanks a lot
Regards

@Vauxdvihl use my script

see here https://github.com/sdetweil/MagicMirror_scripts
for the command to execute

Ok
Thanks
Everythings works fine now

@Vauxdvihl there are 2 different kinds of modules.
The first is a normal Alexa on your Mirror (MMM-Awesome Alexa)
The second kind of Alexa modules work as fake Wemo devices and is able to turn on of modules …(MMM-AlexaControl) but you need a echo device.

@broberg
Thanks a lot
it is now clear

@Vauxdvihl then I would simply raise a git issue to the dev.
I don’t know this module, but I would say at first it come from the css, I might be worng.
Other user of the module can probably help better , but I think the dev can figure this out quickly

Ejay

Thanks a lot
Fixed the prob

To expand upon @eviltrooper’s suggestion:

Pull the SD card out of your Raspberry Pi. Using an adapter, plug the card into another computer (most likely a Windows-based computer). Once the card is plugged in, the data on the drive will appear. You need to copy the config.js file from the SD card to your other computer.

If you’re using a Windows PC, the computer will display two connected drives. One of them will demand that you format before you can use it. Don’t do that. The other drive will show you a file structure.

On the drive with folders, navigate to Home -> pi -> Magic Mirror -> config. You’ll find the config.js file in there. Copy it to your PC, somewhere where you can find it again.

At that point, you’ll want to restart the process to format the SD card and install the Raspberry Pi OS from the tutorial.

@bhepler
Setting this to 1
= > i have 1 hour forecast and 1 day forecast
But i want to have 3 hourly forecasts and not daily forecast
Thanks

Does somebody uses this module?
Thanks