@Esinem I’m brand new here and I was trying to figure that out yesterday. I’m glad I stumbled across this comment. Looks like it’s not gonna work or DOA.

@nibov33070 Dont use this module but noticed you have maxTitleLength: 5, documentation says value between 10 & 50.

I would like to make the spacing between the weekdays smaller, but I don’t know what in the css-file actually influences that. I tried around a bit, but besides making the font smaller, nothing really seem to matter much. Can anyone please tell me if there is an entry I can add to the custom.css to minimize that? Thank you! [image: 1590531013465-screen-shot-2020-05-26-at-3.08.26-pm.png]

I finally got it Workings kinda. But it only works one time after reboot . And then nothing

@Fulcrum1973 In Terminal, edit MMM-GoogleFit.js and locate the line that starts with: if (weight) { Insert the following after that line: config.units = "imperial"; So that’s a blank line, followed by the above code, followed by another blank line. Restart MM and voilà, pounds instead of kilograms.

@sdetweil said in Need help with sdetweil script: so, as I have watched people struggle to reconstruct their mirrors after an update, I wanted to make it easier Hesitated a little bit to submit this reply, but I want to make use of this thread by complimenting Sam on his script. Also for persons that do not really struggle setting up MagicMirror, it is a very useful script. A real time-saver. Today I have set-up 2 MagicMirrors from scratch (went from using SD cards to using USB sticks) and it worked like a charm. Had them running again in no time. So, thanks Sam, for a job well done !

don’t think that this error is related to an index.js from the MagicMirror core, so you can look which module has an index.js with >= 83 lines … or disable modules to catch the “bad” module …

You have 2 possibilities: with your config module (config.js file) with customCommands: [] directly in your own module. There is an real exemple code with MMM-Assistant2Display for TelegramBot

Thank you very much @sdetweil you have just saved my day!

problem solved I needed to put the broadcast events into the subheading of the calendar i wanted the event broadcasted from. and change MMM-Google-Route listen : ‘[CALENDAR_EVENTS]’, { module: "calendar", header: "CainsCalender", position: "top_left", config: { maximumEntries: "5", showLocation: true, coloured: true, coloredSymbolOnly: true, tableClass: 'large', calendars: [ { symbol: "calendar-check", url: "https://calendar.google.comsexyas/basic.ics", **broadcastEvents: true,** }, { symbol: "toilet-paper", url: "https://www.officeholidays.com/ics-clean/australia/queensland", }, ] } },**bolded text**

@thymon Great and sorry I haven’t answered. But I don’t really understand what’s going wrong there and why it is applying a font that you cannot use for free.

@muhammedd search the forum for the 2.11 bug workaround

@mhamad2269 what software on the MM causes the window to open? when you push the button, something receives the signal and then does some operation… what is that, a MM module, some code you wrote, some code someone else wrote, a python script running in the background… a cattleprod? (lol)

@nibov33070 There you go! Have fun.

Hey @sdetweil, still no progress on getting the two modules to work together. Is there anything else you’d recommend trying?

@sdetweil said in Audio configuration not working - MMM-AssistantMk2: @fasteddy does arecord work to capture voice? https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/ arecord can create .wav but I am unable o listen to it to confirm a recording. Heres a list of CAPTURE and PLAYBACK devices: pi@raspberrypi:~ $ arecord -l **** List of CAPTURE Hardware Devices **** card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 [bcm2835-i2s-wm8960-hifi wm8960-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 pi@raspberrypi:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 7/7 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 [bcm2835-i2s-wm8960-hifi wm8960-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Device [USB2.0 Device], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 If I try to get to get the USB speaker to play what the mic is capturing it returns this: pi@raspberrypi:~ $ arecord -f cd -Dhw: | aplay -Dhw:1 ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'defaults.pcm.subdevice' ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'defaults.pcm.subdevice' ALSA lib conf.c:4568:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory ALSA lib conf.c:4568:(_snd_config_evaluate) ALSA lib conf.c:5036:(snd_config_expand) Args evaluate error: No such file or directory ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM hw:1 aplay: main:828: function snd_func_refer returned error: No such file or directory ALSA lib conf.c:5036:(snd_config_expand) Args evaluate error: No such file or directory audio open error: No such file or directory ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM hw: arecord: main:828: audio open error: No such file or directory Any ideas at all please? Cheers!

Hi. Im looking for something to logon to a caldav calendar & create an .ical file that I can point MagicMirror at. It can run on Linux or Windows. Can anyone help? Thanks.

@TamP said in Limit length of specific modules output: Set it to center in config.js //position: “bottom_bar”, position: “bottom_center”, Thanks for that. Out of curiosity I will give it a try

@mattx38 salut, je suis dans la même galère, je n’ai pas trouver la solution et toi ?

@matelot20 Awesome, glad I could help!