@JVF2 First things first, re-run npm install in the module directory. Looks like author may have changed out some dependencies. If that don’t fix it, please check the magic mirror logs for errors. (if you use PM2, run pm2 logs in a second terminal instance, and restart magic mirror, you’ll be able to see if something’s missing) It may also be that the module is just breaking… I can’t get it to work at all, for instance.

@sdetweil Thanks I’ll get right on it! Sent …

@p1lspeda no mechanism to create special formatting

@sdetweil said in Failed update: @DarrenHill ok, try the latest… dang pi results different than other OS versons of npm Thanks - that’s fixed it :D

:thumbs_up: Super! Issue closed! THANK YOU SO MUCH!:handshake:

@CurlyQ12391 maxEntries applies only to today forward. past are broadcast too only today forward are used in cal module

I am looking for a module that works with a MPR121 HAT. I found https://github.com/PatriceG/MMM-MPR121 but looks like it does not work with the current version of MagicMirror. Does anybody use an other module to control the mirror via touch buttons? Thanks for your help. Lora

@CurlyQ12391 supposedly they take mouse events… (the ir frame is a mouse to the system)

Hi all, I have opened a browser and connected to the mirror. Opened the developer tools and checked the settings for the module. I found out that the QRcode itself showed as ‘img’. I have adjusted the custom.css with following settings: .MMM-WiFiPassword #WiFiPassword { width: 140px; } .MMM-WiFiPassword img { width: 125px; height: 125px; } Now the QR code is showing in the correct size: [image: 1663792313808-screenshot-from-2022-09-21-22-30-13.png] Thank you for the support, it’s really appreciated! Gerben

@rmeskill hm… so, next guess is u uninstall pm2 and reinstall I think the command is pm2 u startup which will return the command to execute then to install again u can use my fixuppm2 script see https://github.com/sdetweil/MagicMirror_scripts

ok havent worked on this in a couple weeks. well i have to re-image the card- the OS boot fails so badly that it goes to CLI prompt. hardly had anything so starting from scratch again — but thats Not a MM issue --its a RPI issue

@sdetweil Hey Sam - thank you Sir will do!

@Purple do. cd ~ find . -name MMM-GoogleAssistant -type d 2>/dev/null once u find it, you can move it mv ????? ~/MagicMirror/modules ??? is wherever it is located

@Purple what folder were you in when u did the git clone command? read the two topics in my signature below. they will help you get started. I didn’t write them

@JoeFranz It is probably because of the current firmware 5.15 With rpi-update b976c54917e240630c05a9b383010f1492bc61b4 I installed version 5.10. It now works again with the standby on the HDMI connection. Greetings Joerg edited due to wrong quotes outside code block

@jeromeguill the last two parameters described in the doc give u the ability to specify a specific image

@Purple no, you run install then every 3 months when we release a new version on mm you run the upgrade others are for if u change your mind if English isn’t your primary language, translate the page

This might be… https://github.com/nicokaiser/rpi-audio-receiver

@hesspoint hm… sounds like maybe a bad cable? or a bad port on the pi

@justinreimer I have submitted fix https://github.com/MichMich/MagicMirror/pull/2905 for the next release