@emlowe Thanks, but I can’t since I use the 10.1" adafruit display, looking at the pinout it seems there is a way to control it, but I will have to manually wire it to the pi and write up a driver.

It is installed on my livingroom wall.

@muffinimal & @bhepler happy to be inspirational! :D (y)

I dont have any grade yet, but i expect a big A on this :smiling_face_with_open_mouth_closed_eyes:

@albertlwj Sorry didn’t see this message!! It’s here -> http://108.29.66.102:443/topic/42/mmm-ticknews

@albertlwj liquid nails… not only waterproof, but a great sealer and will hold just about anything if you let it cure long enough. I always double or triple what the directions say… ie: if says to allow to cure for 24 hours, I would most likely give it 72 hours. Also a good seal has no gaps in the glue strip. And most likely, the heat of the monitor will keep the mirror from fogging over.

OH… and if I could get a pointer or 2 on how to fix the align-left on the email module… I feel I have tried everything I can think of (which ain’t much to go by these days!!!)

@maxbachmann said in Basic 32" MM: Module Setup very nice ,camera Module Setup very lovly would you share the config of them thanks

Hi, this is the pir I am using: https://www.tinytronics.nl/shop/nl/sensoren/optisch/ir-pyroelectrische-infrarood-pir-motion-sensor-detector-module-compact It is more sensitive than I thought. I removed the plastic dome, drilled a hole in the wooden rim of the mirror and mounted the pir. Peter

@spooke sure u can. I’ve wooden frame as well. I bought this https://www.obchodprodilnu.cz/paska-montazni-pozinkovana-1071.html (sure u can buy it in hobby market for about 5 Euro or somthing like that), cut the piece as the width of your frame (u can use 2 pliers and bow few times) use 2 screws to mount to back side fo frame (use the whole in the metal plate), use 2 screws into the wall and “hang” it like a picture… it works - I can send my pic… Instead of wall-screws u can use hooks…

Superb !!!

@nkball81 Well, for starters, either edit your picture to match your display’s resolution or find another.

@ostfilinchen Use the image installing hass.io

It was somewhere here on this forum. Just did a search for trello. Can look onto it again when I’m home tonight if you need it? The mirror company was Clonmell Glass in Tipperary. Just ask for 6mm spy mirror.

@fabbr said in Our Hallway Mirror: @eniac said in Our Hallway Mirror: MMM-ImagePhotos for the QR-Code (Wifi for Guests) GENIUS !!! Love that idea

Amazing work, would like to see more of some projects of you like this! Klasse!

good work bro its amazing

@REDNAVE What type of mirror are you using? It’s not a 50/50 as mines is that and it is not as reflective as your one, so is it a 75/20 Pilkington Mirrorview? Thanks.

Awesome idea!!! you just gave me an idea … to put my HousePanel on my 10" alarm clock in my bedroom!.. it’s a touch screen so hey why not…

An old monitor. link text link text