@schwarem That’s not your or your RPI’s fault. :) With your previous log image, at least 7 calendars had to be parsed. The first calendar (12 events) was fetched on 11:06:27, and the last calendar(93 events) was fetched on 11:06:40. These 7 calendars need almost 13 seconds to parse completely. But CX3* would appear after 5 seconds(by default) from the first fetching. Nobody can’t foresee when the last calendar will finish the fetching (or even whether it is complete or not). So CX3* will wait a few seconds and then show only the events from the current aggregated regardless of whether some unfetched calendars remain. CX2 parsed events of the calendar by itself so it could know whether all events were fetched or not.(At least I made so), but CX3 doesn’t parse the calendar, only using the feed from another module. That’s the difference. No worry. Until the next cycle(defined by refreshInterval), the unfetched calendars would be fetched until then. In the following refreshInterval, your missing events will be shown adequately. Or, increase waitFetch to wait more seconds for more calendars to fetch.

@timwool no , sorry

@jonnyollet the default calendar module does not get the Google calendar event colors in the ICS data. it is not part of the interchange standards. so the only thing we can send is the URL configured colors. the custom event config colors are not used until display time so they are not available when the broadcast is done

Please mark this topic as solved. The only thing I can figure is that it too some time to propagate maybe ? I haven’t changed anything yet this morning it was able to generate the token without any issues Thank you for the help :)

That did the trick, thank you.

Shares bought and now ok with MM. Thanks for your help,

@MMRIZE the default fetchInterval is set to 7 days…

@nhweb /* MMM-CalendarExt3 config in config/config.js */ ... config: { eventTransformer: (event) => { if (event.calendarName === 'test' && event.description) { // If event is from 'test' calendar and has description, event.title = event.description } return event; } ... 9:00 PM event was originally titled as ‘Singleday Event’ [image: 1706611641608-f6e47e7f-7994-4b6d-8071-4a97658aee7f-image.png]

@KristjanESPERANTO just wanna say thanks it works

@gelaw this is the version from prior release… we’ll see what happens by April 1.(next mm release)

Any way off changing colors with states off sensors? Is it possible to round decimals like in home assistant itselfe? I hate having temps with 2 decimals and/or watts.

Thank you @KristjanESPERANTO for providing a fix for it.

@MMRIZE we have this problem in general… mm used to display on TV’s and ipads/ android tablets… but as we’ve moved to ES6 level js, they no longer work… I find this a sad state for MM… (but I like the new ES6 support)

@csongor-varga-0 For the multilines events; not naturally. It is designed so intentionally. I know it is probably possible with heavy CSS tweak but I will not do or try it by myself. For the (+1) : There might be hidden(skipped) events. (You’ve set skipDuplicated: true)

@sdetweil yeap thx that does it to on my side! Regards,

I am want to use MMM-HVIEW-Snapshot to bring a IP camera picture into my MM screen. In the log, I can see the following Failed to load URL: xxxx with error: ERR_BLOCKED_BY_RESPONSE I have the IP whitelist set to my complete home subnet: address: "0.0.0.0", ipWhitelist: [["192.168.1.0","192.168.1.253"],"127.0.0.1", "::ffff:127.0.0.1", "::1"], And the URL I am trying to load is also on the same subnet: http://192.168.1.82/cgi-bin/api.cgi?cmd=Snap&channel=0&rs=abcd1234&user=xxx&password=xxx When I open my MM page in Chrome and check the errors, I see the following: Refused to display 'http://192.168.1.82/' in a frame because it set 'X-Frame-Options' to 'sameorigin'. I assume this is because the browser is not allowing the iframe to load a content from a different IP. How can I fix this? Or can you recommend an alternative module that would do the same?

@svenpisa https://github.com/MMRIZE/MMM-CalendarExt3/wiki/Examples-%26-Tips

@cedricB Solved, i put a sudo order before shutdown in jason file.

@sdetweil Huh. Well, that’s new. If I ever get around to making the hardware accelerated version I’ll give it a go.

@jasonumd didn’t need to reboot… if using pm2, then pm2 status pm2 restart xx where x is the number of the line of the MagicMirror app or the name shown on that same line (I set it up as MagicMirror, others get mm as they started mm.sh)