MagicMirror² v2.4.1 is available! For more information about this release, check out this topic.
Please read the release notes carefully since this update requires adjustments to your Raspberry Pi configuration!

Something is wrong ....



  • I need some help: I own a Pi2 and a Pi3.
    On both I can run MM.
    MM is on two different sd cards (almost identical).
    After a few hours running MM stops and restarts or MM freezes and does not restart.
    I have the following modules:
    Updatenotification
    Systemtemperature
    Moonphase
    Watchdog
    Clock
    Calendar monthly
    Calendar
    Movielisting
    NOAA
    Formula1
    Imagephotos
    Newsfeed

    It runs nice, so I think the config is ok.
    Freezing or restarting happens with both the Pi2 as the Pi3, so I think it is not the hardware.
    Where do I start troubleshooting (maybe the pictures in Imagephotos?)
    Thanks.
    Peter



  • Is it the same as my error?
    https://forum.magicmirror.builders/topic/6181/mirror-turning-black-after-a-while

    I do not have restarts of freezes, but everything turning black though. Can you reach your mirror through SSH after a freeze?



  • @retroflex , I can reach my mirror after freezing with VNC.
    But the Jessie GUI is also frozen; time has stopped …
    So maybe the problem is Jessie?
    I use normal Jessie, not lite.
    Peter


  • Module Developer

    @Peter said in Something is wrong ....:

    So maybe the problem is Jessie?

    I doubt very much that the problem is Jessie. It’s the most stable OS for MM that I’ve found, aside from ubuntu. If there was a problem with the installation of Jessie then that would be another matter completely.

    Have you tried running just the default modules to see if the problem still occurs?



  • @Mykle1 , thanks.
    I think that is the only way: start with the default modules and the rest one by one until the problem occurs.
    Peter



  • Had/Have the same problem. I just copied all modules and the config of my main running RPi 3.
    I set up a RPi 2 with the copied files just for experimental usage. When i run up both at the same time my RPi 3 stops after a few minutes or 1-2 hours and put these errors:

    Tue Jan 16 2018 06:51:13 GMT+0100 (CET) - WatchDog: Heartbeat timeout. Frontend might have crashed. Exit now.
    fatal: unable to access 'https://github.com/MichMich/MMM-WatchDog.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/vicmora/MMM-GoogleMapsTraffic.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/vicmora/MMM-GoogleMapsTraffic.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/Jopyth/MMM-Buttons.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/MichMich/MMM-WatchDog.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/MichMich/MagicMirror/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/Jopyth/MMM-Buttons.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': SSL connection timeout
    
    fatal: unable to access 'https://github.com/eouia/MMM-Remote-Control-Repository/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/ptrbld/MMM-Podcast.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/KirAsh4/calendar_monthly/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/MichMich/MagicMirror/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/mykle1/MMM-EasyPix/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/MichMich/MagicMirror/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCalendar.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/jclarke0000/MMM-MyCommute.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/cowboysdude/MMM-NOAA/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/BenRoe/MMM-SystemStats/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/PtrBld/MMM-Scrobbler.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/Jopyth/MMM-Remote-Control.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/Tueti/MMM-MovieListings.git/': Couldn't connect to server
    
    fatal: unable to access 'https://github.com/paviro/MMM-Wunderlist.git/': Couldn't connect to server
    

    Even if i run just the modules without an API the problem comes up. Don’t know why yet



  • @Peter

    Lets write here, so the other thread would not be filled up with this problem 😉

    so u don’t know how it starts. That sound like u used the automatic installer and clicked “YES” when it asked u to start automatically.

    Please type in console:

    pm2 status
    U will see a process name (probably “MagicMirror”)

    now u can use
    pm2 start MagicMirror to start MM
    pm2 stop MagicMirror to stop MM
    pm2 restart MagicMirror to restart MM

    or even
    pm2 logs MagicMirror to see logs and errors. Please try if i am right and then post the error log here



  • @cruunnerr after typing pm2 status I see two processes:
    MagicMirror online
    mm. stopped

    after typing pm2 stop MagicMirror both processes are stopped.
    Peter



  • alright. so u used the automatic installer AND did the “how to autostart”-Tutorial from MichMich, too ^^

    no problem, we will try to fix. As u can read here, ninjabreadman wrote how to remove one of the instances.

    so please try:

    cd
    pm2 stop mm && pm2 delete mm && pm2 save
    rm mm.sh

    now there should just be the “MagicMirror” process even when u reboot.

    Better now, to erase all logs and wait, if your problems come up again. So type:

    pm2 flush

    Next time u got any problems, please type:
    pm2 logs MagicMirror
    and post it here

    Hope that will help 😉



  • Thanks!
    Great help!
    I hope this helps.
    Next time I will post my error logs here.
    peter