@ashishtank my vehicle is electric, so I didn’t include that in the config as it’s the default.
I just tried adding

vehicleType: 'Electric'

but nothing changed.

Any advice on logs I can check? I feel a bit unhelpful here… :)

Matt

Goodmorning @HDurdle,

I have a question about the module MMM-BMWConnected
We have a Mercedes B250E (Yes I know it’s not a BMW)
We now use a module that is special made for the MercedesME, but its not working flawless. And now I wonder if maybe it is possible to change the module MMM-BMWConnected (BMW Connected Drive Data) so it can process the mercedes data?

@fufu1408 I had the thame Problem, but i solved it.

The Problem is nodered and the dependencies which are neede by the module.

fs-extra node-fetch

They need node > 12 !

How to solve:

Update your System: sudo apt-get update && sudo apt-get upgrade Install NodeRed: bash <(curl -sL https://raw.githubusercontent.com/node-red/linux-installers/master/deb/update-nodejs-and-nodered) --node14 be patient. This will take about 20-30 minutes !! The Script will do ALL the work for you!! install fs-extra + node-fetsch: npm install fs-extra node_fetch Update your MM: git pull Install MM with: npm install (from inside your MM Directory) Update MMM-Fuel: git pull Install MMM-Fuel: npm install (from inside your MMM-Fuel Directory)
Restart your System !!

Thats it !!

An unofficial Magic Mirror Module to show Port Authority Trans-Hudson(PATH) Train schedules. This module is not endorsed nor supported by the Port Authority of NY and NJ.
screen_shot.png

https://github.com/Comf0rTS1997/MMM-pathtime

I developed a new MagicMirror module for the public transport (train, bus, tram, ship, …) in Switzerland.

Outgoing public transport from a station

Connections between two addresses

The github repository is here: https://github.com/eobermuhlner/MMM-timetable-switzerland

It supports showing all connections between two endpoints (both stations or addresses) and all outgoing public transport from a specific station.
Multiple timetables are possible.

Any feedback and criticism is welcome.

@sdetweil

got ya

Does anyone have a Washington DC transit module? Or a module that I can use to edit for DC transit times?

@maricus85 I just installed it, but then you advance and you will have the option to (continue anyway) and that’s it, the section will start and throw your eye code, copy it well and that’s it.

@zuumachi as long as no modules need it, should be ok not to have internet, but does need networking

Initial test with @radokristof fork looks good. Doesn’t come up immedately at startTime, but soon after. Guess that has to do with the poll interval.

@yo-less I installed your module, but it looks like, that there is an download issue. I will receive the information “loading” only.
What could be my problem?
thx in advance

@sdetweil

I’m not certain when exactly this is happening. I’m finding that one of the trains in the module disappears and comes back on it’s own.
Always seems to be long enough to notice it for a few days though.
It should always be visible, as long as there isn’t a cut in the service. Which there currently is not.

MM is always on. Although I’ve tried restarts to correct the issue

I have not seen any update on the github module page, and I am currently up to date.

I’m more looking to see if anyone using the NYC_Transit module has had any of the same issues.

Nick

@jerryp Schermafbeelding 2021-05-23 om 12.58.00.png Its running. Me happy

Have MMM-FlightRadarTracker currently install as well as MMM-FlightsAbove, while they both work as expected and do surprise with whats going on above I’m wondering if there is a way that the displayed data can be retained in a CSV file.

I’ve looked around and not found anything that stands out, plus played around with the very little I know and no to avail.

Any talented and interested guys know how I may be able to do this.

Just joined so hope this is how one goes about putting out info.

@sean
Is this still running??

Hello @ueffchen ,

sorry for the late reply!
If you still got this problem, you can fix it in multiple ways:

MMM Build in sizing

You could change tableWrapper.className = "small mmm-vrr-table"; within MMM-Vrr.js on line 159 into tableWrapper.className = "medium mmm-vrr-table";

Specific font sizes for header

add another line after MMM-Vrr.css:16 with you desired fontsize e.g: font-size: 50px;

Specific font size within table content

add this to the MMM-Vrr.css

.mmm-vrr-table tr { font-size: 50px; }

Re: MMM-MyCommute

In my onfig I have the start time set for 0600, but it doesn’t show. If I restart the mirror it will show and will end at the appropriate time. For startTime to function, am I required to restart the mirror every evening?

odule: “MMM-MyCommute”,
header: “",
position: “bottom_left”,
config: {
apiKey: "”,
origin: “",
startTime: “06:00”,
endTime: “12:00”,
hideDays: [0,0],
colorCodeTravelTime: “true”,
destinations: [
{
destination: "”,
label: ‘The Office’,
mode: ‘car’,
color: ‘#82E5AA’
},
{
destination: “540”,
label: ‘***l’,
mode: ‘car’,
color: ‘#82E5AA’
},

@imellor no gotta find the code that does the request see what optoons it supports, and how

Re: MMM-UKLiveBusStopInfo - Arrivals & Departures from a UK Bus Stop

Sorry for bumping up.this thread

I’m keen on this module for my mirror.

I’ve found what I believe to be my atcocode but I get a ‘loading bus info’ when I use this.

I believe the correct Atco is 73723972…

I’ve tried the other Atco in this thread and this works perfectly… Can anyone help me check if I’ve got the right Atco?

Version 2.0.1 Fixed Sorting of departure times https://github.com/fewieden/MMM-WienerLinien/issues/16

https://github.com/fewieden/MMM-WienerLinien

[card:fewieden/MMM-WienerLinien]