MMM-NOAA - Another Weather Module

[Zooooooom]

Finally updated the module, and I like the new look. However, I was wondering if there’s a toggle to hide the “Forecast” piece.

[Mykle1]

@Zooooooom

You can’t hide it in css?

[Zooooooom]

I believe the last version had some toggles in the config which were quite nice to have, which is why I am asking if it’s there now. I took a quick look at the code, and wasn’t able to find anything like it.

I would prefer not to mess with CSS files, because it would mean that updates might break my config.

[Mykle1]

@Zooooooom said in MMM-NOAA - Another Weather Module:

I would prefer not to mess with CSS files, because it would mean that updates might break my config.

No sir. Your config is unaffected by your custom.css entries. In fact, it’s the very reason there is a custom.css file, so that you can make those changes without changing the module files and you don’t lose your changes when the module is updated.

[cowboysdude]

@Zooooooom put this in your custom.css file:

.MMM-NOAA .forehead {
display: none;
}
.MMM-NOAA .fmar {
display: none;
}

after you do a git pull to update your NOAA css file :)

[Zooooooom]

@Mykle1 Thanks, I didn’t realize that.

[Zooooooom]

@cowboysdude Awesome, thanks!

[Peter]

I am using NOAA version 1 because I like this more than version 2.
Is there any problem going to be in the future with version 1?
Peter

[Mykle1]

@Zooooooom

@Zooooooom said in MMM-NOAA - Another Weather Module:

@Mykle1 Thanks, I didn’t realize that.

You are welcome, sir. I see that @cowboysdude has given you some direct assistance above so I will bow out gracefully. Props to @cowboysdude for his wonderful module and fantastic support.

[cowboysdude]

@Peter said in MMM-NOAA - Another Weather Module:

I am using NOAA version 1 because I like this more than version 2.
Is there any problem going to be in the future with version 1?
Peter

Not sure what you mean. Do you mean you’d like to see future versions based on V1?

[Peter]

@cowboysdude yes; there are not going to be any updates for version 1?
Peter

[barnosch]

Same for me.
I will stay with V1, since the new one is too fancy (and way to big) for me.
Hope it will not getting corrupted by any changes with the new versions.

[yawns]

Ideal would be to use the same core and develope different templates which could be chosen via config.

[cowboysdude]

@yawns said in MMM-NOAA - Another Weather Module:

Ideal would be to use the same core and develope different templates which could be chosen via config.

You would think that wouldn’t you? LOL

[Mykle1]

This is, by far, my favorite weather module, V1 and V2. And like everyone else, I have my own likes and dislikes. But rather than trouble @cowboysdude and his vision of what he wants the module to be, I made my own adjustments via css. With 76.6k views, and 390 posts in this topic alone, I can’t even imagine trying to satisfy everyone’s requests.

Forrest Gump: “That’s all I have to say about that.”

[soshea1]

Hey there,

Im hoping that someone can help me out with an error on this module. I am a complete newbie to this, so please bare with me.

I have loaded the MMM-NOA module onto the config script, created the API key and selected the PWS on wundermap. However when i load up Magic Mirror- The module displays 'Undefined and NAN with no information loaded. It seems like it is just not pulling the info from the PWS correctly.

I followed the instructions correctly, but dont seem to be able to fix this.

Thank you

[Mykle1]

@soshea1

Did you try another PWS? They can fail. Also, post your config entry for NOAA here (in a code block) so we can have a look at it.

[soshea1]

@Mykle1

Yes i tried using multiple different PWS codes, and still none of them display.

Ill try upload a picture in a separate reply of what displays.

Thanks for any help

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.****** :
	                                                       // ["127.0.0.1", "::ffff:127", "::1", "::ffff:192."],
	                                                       // or IPv4 range of 192. --> 192.1 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.", "::1", "::ffff:192/28"],

	language: "en",
	timeFormat: 24,
	units: "metric",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "Canada Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check-o ",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/39/Canada_Holidays.ics"
					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			disabled: true,
			module: "currentweather",
			position: "top_right",
			config: {
				location: "New York",
				locationID: "",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			disabled: true,
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "New York",
				locationID: "5128581",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
			disabled: false,
			module: 'MMM-NOAA',
			position: "top_right",
			config: {
			apiKey: "f78fa7e86*****",
			useAir: false,
			psw1: "IONTARIO1060",
			lat: "43.177",
			long: "-79.800",
		}
  		},
	
		]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

[yawns]

It is pws1, not psw1
And according to the readme you don’t need lat and long

[soshea1]

@yawns

Thank you so much!. Such a small detail caused me hours of pain!

I must of looked at that config 100 times and didnt spot that!