MMM-voice

strawberry 3.141

@Peter type this in your terminal

cd ~/MagicMirror/modules
git clone https://github.com/fewieden/MMM-voice.git

then follow the instructions here

Peter

@strawberry-3.141 cloning went well!
No step 6, so this was the right version.
I can see a microphone on the screen (with the word ERROR).
I still have to find out where the error comes from.
Thanks for all your help!
Peter

Peter

Errorlog:127
Debuglog: pocketsphinx_continuous: error while loading shared libraries: libpocketsphinx.so.3: cannot open shared object file: No such file or directory

Why is it so hard to get this working?
Peter

Mykle1

@Peter said in MMM-voice:

Why is it so hard to get this working?

Maybe this will help you. It has helped a few people get up and running.

Assuming you installed the dependencies as per the readme. At the end of the dependencies installation is a readout for your microphone entry in the config.js. You can see this readout again. in your terminal type: cat /proc/asound/cards. You can verify your microphone this way.

And this should remove the error that you are receiving. Close all your terminals.
Open a new terminal.
type: LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib and Enter

Then type: sudo ldconfig and Enter

Now try it. Good luck

Peter

@Mykle1 magic!
It works!
Thanks!
Peter

Mykle1

@Peter

The real magic comes from Strawberry. :-)

Glad you got it working. :-)

Cyberdale008

Hi folks, usually don’t post. Just read a lot. But I am a lil over my head here. ASE Certified Master Mechanic here, but dang this coding is tough!! This module works fantasic. However I would like to change this ( /opt/vc/bin/tvservice -p && sudo chvt 6 && sudo chvt 7 ) to this ( /opt/vc/bin/vcgencmd display_power 1 ) and ( /opt/vc/bin/tvservice -o’, null ) to this ( /opt/vc/bin/vcgencmd display_power 0 ) I just want the tv to go off, I don’t want the no signal or light off the screen to show up. Is this even possible. Thanks in advance for any help!!

cowboysdude

@Cyberdale008 sure it is…just to the node_helper and change it.

Look for these lines :

} else if (/(WAKE)/g.test(data) && /(UP)/g.test(data)) {
           exec('/opt/vc/bin/tvservice -p && sudo chvt 6 && sudo chvt 7', null);
           this.hdmi = true;
       } else if (/(GO)/g.test(data) && /(SLEEP)/g.test(data)) {
           exec('/opt/vc/bin/tvservice -o', null);

and make your changes :)

AxLed

@strawberry-3.141 said in MMM-voice:

@AxLed https://cmusphinx.github.io/wiki/faq/#q-which-languages-are-supported

@strawberrxyy 3.141

I tried to change the language to german / german voice recognition with some informations from here:
https://mycroft.ai/documentation/language-support/german/
but my skills a not good enough to get it working.

3 more questions:
Is there a command for commandline to test Pocketsphinx and its components, so maybe i can find out where i went in the wrong direction.

Do i need for changing the language model only have to download certain files and bring them in the right structure or do i have to compile something afterwards?

Where could i change the path to other language models in MMM-voice, i only found links to the .lm an .dic file but not to the .../model/en-us/ structure.

AxLED

strawberry 3.141

@AxLed

pocketsphinx_continuous
You need to look for instructions where you downloaded those files
you can specify the language model with the option -hmm in the node dependencie pocketsphinx-continuous-node

maxbachmann

In case you get it running in German can you share it?
could really use this as well :)

Max

strawberry 3.141

@maxbachmann even if he’s able to get german running are the commands and supported modules only working with english, to make this possible there is a big effort necessary, that I cannot put in anymore

prs are highly welcome for this, but make sure to discuss possible implementations upfront, to avoid getting the pull request rejected

maxbachmann

oh I mean that in case he manages it he could share it :)
I will probably go with the english voice control for now because there are already many working modules out there

tbbear

@maxbachmann
Hi, the modules get signals to act and it realy doesnt matter in with language u use the voice.

By the way i am also interested if u get it working in german

maxbachmann

yeah but you still need to train it for the language

djsunrise19

@strawberry-3.141 said in MMM-voice:

We could get Around the issue of @witschi87 but we dont know yet what the problem actually is. When he starts his mirror with DISPLAY=:0 nohup npm start & it works, with pm2 start mm not, but i have seen a couple using it with pm2 already

@iMAGiC sry I my Time is pretty Limited due to my Bachelor thesis, but i will have a look if i can adjust the Existent Music player to Voice commands easily

@strawberry-3.141 Any news here? I have the same problem. It works with pm2 restart mm but not after a reboot. Error 1.

sispheor

Guys,
If you want to try a multiple languages and self hosted module you can take a look here: https://forum.magicmirror.builders/topic/6615/kalliope-assistant-mm

This module allow you to bind MM to Kalliope assistant.

Demo:
https://www.youtube.com/watch?v=QHwctPbJ2ZY

dogfeet

hi guys, i’m a little over my head here, really not familiar with coding very much but i’ve got voice working and been able to tweak a few things.

what i want to do is probably very easy but i just can’t get it to work. i want to have mmm-voice control the default compliments module such that compliments begins hidden by default and i can say “how do i look” and the mirror will show the compliments module for 10 seconds then hide it again.

i could change the compliments to have appropriate responses and then when the user says “how do i look” the mirror will appear to answer them.

i was thinking of setting “HOW DO” as the mode command to control the compliments module and then “I LOOK” could be the command within that mode to show a compliment for 10 seconds.

what do you think? is this a simple task?

strawberry 3.141

@dogfeet cannot tell if it is an easy task for you, it depends on your knowledge about JS and MagicMirror

I assume you read the documentation here

in your compliments module you need to register your commands
then you need to check for your command

notificationReceived: function (notification, payload, sender) {
    // 1. register module
    if(notification === "ALL_MODULES_STARTED"){
        this.sendNotification("REGISTER_VOICE_MODULE", {
            mode: "HOW DO",
            sentences: [
                "I LOOK"
            ]
        });
    }

    // 2. react on command
    if(notification === "VOICE_HOW DO" && sender.name === "MMM-voice"){
        if(/(LOOK)/g.test(payload)){
            // unhide the module,
            // set a 10 sec timeout
            // hide your module
        }
    }
}

That’s all you need to connect your module to MMM-voice. Now you have to implement the comments

cyberphox

@strawberry-3.141 said in MMM-voice:

https:

Tried installing this today on a Dell Latitude E5500 running Ubuntu.

Seemed to install ok. Said my microphone was labelled 0
so entered that in config.js

Not getting any errors on running, but not getting a microphone icon anywhere on screen?