@yawns I copied everything exactly, had a thrice over look at syntax but now the module doesn’t show at all. On the MM it just shows the name, but not the content. Help?

Ok now it works. Maybe openweather updated their server.

So I am attempting to use a mini-pir sensor with the MMM-PIR module. I am able to successfully use a full size SR-501 PIR sensor but when I try to use the mini SR-505 sensor the sensor triggers a wake cycle every 40 ish seconds regardless of motion. I’m positive this is because the operating range of the smaller sensor is a slightly higher voltage (4.5V minimum to 20V max) and is causing it to have occasional peaks when it is running at only 5V. Is there a way to implement debouncing in this module? I have zero programming experience but have looked into this issue and seen debouncing used in other applications. Any recommendations?

I will update and check the functionality. Thanks. @RedNax said in MMM-WunderGround not updating after a few hours: Changed around some things in the way information is retrieved from weatherunderground. It’s on github, please test.

I found the problem. Initially I named module as “Titus” and have javscript as “titus.js”. I renamed like below and it worked. “titus.js” to “Titus.js” { module: 'Titus', position: 'middle_center', header: 'Titus module', config: { text: 'Glory to God, Jesus and Holyspirit, all the time' } }, Thank you. Regards, Titus S.

I’m sorry if this is really the wrong forum but I couldn’t find a place where to post questions about the default modules. The newsfeed module doesn’t seem to have an option for how long the news should be shown only timings I can see to set is how often the feed should be updated, how long the fading in and out should take and how long between the showings, not how long the actual showing is going to take place. Have I understood that correctly and in that case, do I need to go into the actual js file and hardcore into the module?

@strawberry-3.141 Well i tried Chromium but i didn’t get it to work on the Pi Zero. With the code you provided it works well. Thank you for your time.

@yawns I actually managed to figure it out. The problem was in the configs for the individual modules. They were set for ´config.js´ instead of ´config.units´ and ´congif.timeFormat´. Once I changed those it worked out. Thanks for the help though!

@s1081314 I had the same problem. Couldn’t capture using USB webcam. Read somewhere that it does not work with USB webcam. So i got around this by taking pics (fswebcam) and selecting option 2 and giving the path to where the images were saved. That worked without any issue. Read the post below… https://support.magicmirror.builders/topic/210/facial-recognition-customize-your-mirror-for-every-user/33 Cheers!

Hey guys, i have a problem with my sonos module. It doesn’t show any infos except the speaker names.

okay i can’t edit my post… how can i change the connection.php script so that i see when my train come to late ? i only wanna see my train from my city (for example berlin) to frankfurt with the lateness time but only the way to the city (like that https://forum.magicmirror.builders/uploads/files/1462363258197-mm_st.jpg) not the way back from the “Deutsche Bahn” i only got that (with apikey) http://download-data.deutschebahn.com/static/apis/fahrplan/Fpl-API-Doku-Open-Data-BETA-0_81_2.pdf

@bhepler Thanks for you reply, I’m glad you got it to work in the end :) I was in the middle of writing a big response and had my config file pasted in and everything and then… I realised i had it set in a layer to high, in the module config rather than the calendar config (facepalm) :( anyhow, its working now so Yay!! haha

http://raspberrypi.tomasgreno.cz/ntp-client-and-server.html (just follow the client section.)

@strawberry-3.141 Thanks for your help

With state i get the status open or closed. in the config-file i have two sections { module: 'MMM-FHEM', position: 'bottom_bar', config: { deviceNames: [ 'Bad', ], deviceReadings: [ { name: 'temperature', icon: 'wi wi-thermometer', suffix: '°' }, ], }, }, and { module: 'MMM-FHEM', position: 'bottom_bar', config: { deviceNames: [ 'Schalter1', ], deviceReadings: [ { name: 'STATE', icon: 'wi wi-thermometer', suffix: '°' }, ], }, }, but the mirror show me the same values. I tryed a second modul MMM-FHEM2, but i have always the same values.

@max72at When i installed it on a Pi the module worked fine and showed all lists and their contents, maybe it’s an issue with node.js when installed on a regular PC?

Hello everbody, Our standard newsfeed and calendar keeps loading the error shows the following: GET http://localhost/socket.io/?EIO=3&transport=polling&t=LUD6… 403 (Forbidden) socket.io.js THe same goes for the 3rd party module: Stocks. Does it have to do something with Socket.io? Appreciate the help! -Yaime and Davey

@KirAsh4 Thank you. It woks fine! Sebastian