@sdetweil said in Audio configuration not working - MMM-AssistantMk2: @fasteddy does arecord work to capture voice? https://wiki.seeedstudio.com/ReSpeaker_2_Mics_Pi_HAT/ arecord can create .wav but I am unable o listen to it to confirm a recording. Heres a list of CAPTURE and PLAYBACK devices: pi@raspberrypi:~ $ arecord -l **** List of CAPTURE Hardware Devices **** card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 [bcm2835-i2s-wm8960-hifi wm8960-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 pi@raspberrypi:~ $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA] Subdevices: 7/7 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 Subdevice #2: subdevice #2 Subdevice #3: subdevice #3 Subdevice #4: subdevice #4 Subdevice #5: subdevice #5 Subdevice #6: subdevice #6 card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 IEC958/HDMI [bcm2835 IEC958/HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: ALSA [bcm2835 ALSA], device 2: bcm2835 IEC958/HDMI1 [bcm2835 IEC958/HDMI1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: seeed2micvoicec [seeed-2mic-voicecard], device 0: bcm2835-i2s-wm8960-hifi wm8960-hifi-0 [bcm2835-i2s-wm8960-hifi wm8960-hifi-0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Device [USB2.0 Device], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 If I try to get to get the USB speaker to play what the mic is capturing it returns this: pi@raspberrypi:~ $ arecord -f cd -Dhw: | aplay -Dhw:1 ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'defaults.pcm.subdevice' ALSA lib confmisc.c:1281:(snd_func_refer) Unable to find definition 'defaults.pcm.subdevice' ALSA lib conf.c:4568:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory ALSA lib conf.c:4568:(_snd_config_evaluate) ALSA lib conf.c:5036:(snd_config_expand) Args evaluate error: No such file or directory ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM hw:1 aplay: main:828: function snd_func_refer returned error: No such file or directory ALSA lib conf.c:5036:(snd_config_expand) Args evaluate error: No such file or directory audio open error: No such file or directory ALSA lib pcm.c:2565:(snd_pcm_open_noupdate) Unknown PCM hw: arecord: main:828: audio open error: No such file or directory Any ideas at all please? Cheers!

Hi. Im looking for something to logon to a caldav calendar & create an .ical file that I can point MagicMirror at. It can run on Linux or Windows. Can anyone help? Thanks.

@TamP said in Limit length of specific modules output: Set it to center in config.js //position: “bottom_bar”, position: “bottom_center”, Thanks for that. Out of curiosity I will give it a try

@mattx38 salut, je suis dans la même galère, je n’ai pas trouver la solution et toi ?

@matelot20 Awesome, glad I could help!

@sdetweil said in I dont even know: @Mahieedaboss said in I dont even know: portaudio.h: No such file or directory google is your friend https://stackoverflow.com/questions/33513522/when-installing-pyaudio-pip-cannot-find-portaudio-h-in-usr-local-include Great, thank you very much! It worked… greeting

@gwiz I don’t know the code says if (this.isInWindow(this.config.startTime, this.config.endTime, this.config.hideDays)) { startTime defaults to 00:00 and endTime defaults to 23:59 and hideDays defaults to []

@KNealO please use the automated install see here for the command to issue https://github.com/sdetweil/MagicMirror_scripts

@d-iego Hello-Lucy https://github.com/mykle1/Hello-Lucy

I have been using this module for the past 3 or so months. Initially I had the same issue. What you need to do is to download the powershell scripts from the module’s GitHub page. Run those and see if you get any data back. I can help you if you experience any issues with this. You will have to try different end points until you find the correct one for your region. I then changed the locale as described in the above posts and it’s been working since. I have since changed the module a bit to add more functionality.

@Stoffbeuteluwe It isn’t exactly the bottom bar. But it’s ok. It will be good for me. Thank you !

I think I found something … Just test it … https://github.com/jharttech

@avalonvalvi have a Look at the compliments module that can do what you want

@Cetax You’re welcome, mate. :thumbsup: You can mark this topic solved.

@bhepler @Lordy - Yes, that’s it. Thank you. Okay, I will make future.

@Dhiraj said in MMM Lucy Not working: I install magic mirror and setup all default modules. I setup new model called MMM-Lucy but when I start magic mirror I heard voice in speaker (bluetooth speaker) but when I speak show all or hide it’s not working and near mic symbol it shows ERROR. Did you follow the instructions from the readme file? Did you record the arecord test.wav to confirm that your microphone was working successfully before you tried Lucy? Run arecord -l in a terminal and post the result here. It should look like this pop@e8300:~$ arecord -l **** List of CAPTURE Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC221 Analog [ALC221 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 2: ALC221 Alt Analog [ALC221 Alt Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 pop@e8300:~$ Did you enter the appropriate card and device number into your config entry for Lucy?

Hi there, The Sensor now works like a charm. But actually i am not sure what i changed, but since i enabled (and now again disabled) the Debug, it recognices every movement like intended. The Debug actually helped to see when it detects a movement, so that was indeed helpful. Thank you very much for the quick support! Best Regards, Roman

@strawberry-3-141 Ok, thanks for your answer. I have now solved it so that I have given the coordinates of the station and only 1 display. greeting Stefan

Got it! I was wondering why the false positive signals come in a strict 60 second interval. The cause of the problem is the WiFi. The cables between the Raspberry and the PIR sensor acted like an antenna. The WiFi signal apparently caused a regular induction in it. I solved the problem by moving the cables to the other side of the Raspberry (as far away from the WiFi antenna as possible). I also wrapped them with aluminium foil. The problem has disappeared :-)

@sdetwell Thank you. It’s working now.