@gismo2006
Sorry. That was my typo miss. I fix it now.

Re: MMM-Jarvis-Voice-Control

Hi guys!
I have a Python module(test.py) and have Snowboy hotword (test…pmdl).
Question: How can i start Python module(test.py) with my Snowboy hotword(test.pmdl) voice command in Jarvis"?
Thank you!
Best,

does this work offline or do i need an internet connection?

Same here too with two calendars. Tried to set max entries to 5, but didn’t work for me, have at least 20 entries as I can see.

Github

I recently completed my MagicMirror and was looking into power saving options for when nobody is in the house. there are quite a few options for this but none of them ticked all the boxes.
This module hopes to solve this. by using generic brand burglar alarm sensors and a 433Mhz receiver.

p.s. The rest of this message is on the wiki page of the module as the post kept being blocked by Akismet.com anti-spam.

MMM-Glance

It shows specific module(s) and hides others for some time by notification or commands(MMM-TelegramBot or MMM-Assistant). Just simple.

When you use background wallpaper, it is difficult to see the module(s) above the background clearly. You can use this module for focusing specific module(s) for a while. When you have too many modules but some of them don’t need to be shown always, you can reveal hidden module(s) for some time with this.

[card:eouia/MMM-Glance]

Hello,

I present to you a dull but useful module! It hides (using the module.Hide(); function) all the modules via notifications. I have it set up to use Alex Yak’s voice control (https://github.com/alexyak/voicecontrol).

See it in all it’s glory - https://github.com/skarard/sleepr

I am doing some development on the Magic Mirror modules as a bit of a project between jobs. Here is the first of many.

Big thanks to MichMich for all the work he has done! What a brilliant thing!

remember to do chmod +x shellscriptname.sh

Hello everyone

I just finished my first module for the MagicMirror. It is a very simple module, it lets you send a HTTP request and not paying attention to the response (other that the status code).

If you want you can configure it to be completely “silent” (no alerts) or it can send a notification (e.g. show an alert) when finished.

[card:cederstrom/MMM-HTTPRequest]

Any feedback is much appreciated!

Hi, i’m a totally beginner and the temperature/ humidity sensor is one of my first modules i want to install by myself. Here is the github link:

https://github.com/bernardpletikosa/MMM-DHT-Sensor

This were the first things i did:

pi@raspberrypi:~ $ cd ~/MagicMirror/modules pi@raspberrypi:~/MagicMirror/modules $ git clone https://github.com/bernardpletikosa/MMM-DHT-Sensor.git Klone nach 'MMM-DHT-Sensor'... remote: Counting objects: 18, done. remote: Total 18 (delta 0), reused 0 (delta 0), pack-reused 18 Entpacke Objekte: 100% (18/18), Fertig. Prüfe Konnektivität... Fertig. pi@raspberrypi:~/MagicMirror/modules $ cd MMM-DHT-Sensor pi@raspberrypi:~/MagicMirror/modules/MMM-DHT-Sensor $ npm install

But then there came these lines:

npm WARN prefer global node-gyp@3.6.0 should be installed with -g > rpi-dht-sensor@0.1.1 install /home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/rpi-dht-sensor > node-gyp rebuild make: Entering directory '/home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/rpi-dht-sensor/build' CC(target) Release/obj.target/node_dht_sensor/src/bcm2835.o CXX(target) Release/obj.target/node_dht_sensor/src/node-dht-sensor.o SOLINK_MODULE(target) Release/obj.target/node_dht_sensor.node COPY Release/node_dht_sensor.node make: Leaving directory '/home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/rpi-dht-sensor/build' > Magic-Mirror-Module-DHT-Sensor@1.0.0 postinstall /home/pi/MagicMirror/modules/MMM-DHT-Sensor > electron-rebuild -e ../../node_modules/electron-prebuilt An unhandled error occurred inside electron-rebuild Unable to find electron-prebuilt's version number, either install it or specify an explicit version Error: Unable to find electron-prebuilt's version number, either install it or specify an explicit version at _callee$ (/home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/electron-rebuild/lib/cli.js:74:17) at tryCatch (/home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:63:40) at GeneratorFunctionPrototype.invoke [as _invoke] (/home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:337:22) at GeneratorFunctionPrototype.prototype.(anonymous function) [as next] (/home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/babel-runtime/node_modules/regenerator-runtime/runtime.js:96:21) at GeneratorFunctionPrototype.tryCatcher (/home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/bluebird/js/release/util.js:16:23) at PromiseSpawn._promiseFulfilled (/home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/bluebird/js/release/generators.js:97:49) at /home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/bluebird/js/release/generators.js:201:15 at Object. (/home/pi/MagicMirror/modules/MMM-DHT-Sensor/node_modules/electron-rebuild/lib/cli.js:197:4) at Module._compile (module.js:570:32) at Object.Module._extensions..js (module.js:579:10) at Module.load (module.js:487:32) at tryModuleLoad (module.js:446:12) at Function.Module._load (module.js:438:3) at Module.runMain (module.js:604:10) at run (bootstrap_node.js:394:7) at startup (bootstrap_node.js:149:9) npm WARN Magic-Mirror-Module-DHT-Sensor@1.0.0 No repository field. npm WARN Magic-Mirror-Module-DHT-Sensor@1.0.0 No license field. npm ERR! Linux 4.4.34-v7+ npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" npm ERR! node v6.10.0 npm ERR! npm v3.10.10 npm ERR! code ELIFECYCLE npm ERR! Magic-Mirror-Module-DHT-Sensor@1.0.0 postinstall: `electron-rebuild -e ../../node_modules/electron-prebuilt` npm ERR! Exit status 255 npm ERR! npm ERR! Failed at the Magic-Mirror-Module-DHT-Sensor@1.0.0 postinstall script 'electron-rebuild -e ../../node_modules/electron-prebuilt'. npm ERR! Make sure you have the latest version of node.js and npm installed. npm ERR! If you do, this is most likely a problem with the Magic-Mirror-Module-DHT-Sensor package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! electron-rebuild -e ../../node_modules/electron-prebuilt npm ERR! You can get information on how to open an issue for this project with: npm ERR! npm bugs Magic-Mirror-Module-DHT-Sensor npm ERR! Or if that isn't available, you can get their info via: npm ERR! npm owner ls Magic-Mirror-Module-DHT-Sensor npm ERR! There is likely additional logging output above. npm ERR! Please include the following file with any support request: npm ERR! /home/pi/MagicMirror/modules/MMM-DHT-Sensor/npm-debug.log

The way i connected the dht11 sensor is shown in the following picture:
alt text

I dont know what i did wrong, can anyone help me please?

Re: MMM-Admin-Interface

you can add that yourself https://github.com/MichMich/MagicMirror/wiki/MagicMirror²-Modules/_edit

@roramirez said in Current Weather:

I can tell you the feature is already done and waiting to merge, this is a @MichMich’s decision.

Thanks a lot.

Not sure what the issue is but this belongs under this forum:

https://forum.magicmirror.builders/category/29/troubleshooting

These forums are for posting actual modules ;)

@izanbard said in Display modules in a carousel:

@PointPubMedia yes you can, but you do it by position. Read the config above and see if you can work out in the positional settings you ignore modules per position. Hint it is between enabled and overrideTransitionInterval.

Working fine ;)
That’s perfect!

thanks mate!

Description:

This module allows you to set the brightness of your Pi 7" screen based on the time of day. Perfect for when you use your MM as an alarm clock (from @strawberry-3-141)!

Screenshots:

N/A

Download:

[card:mjtice/MMM-Screendimmer]

Version 1 Initial release

At first the app was developed only with my Bluetooth module in mind. That is, because I want to build some MagicMirrors for friends and family, but i don’t want to set them all up individually (as in connect them to their wifi by touching the RaspberryPi). And Bluetooth was the first that came to mind, to solve that issue.
One could also create a general image for RaspberryPis with a MagicMirror installation, you can just write to SD and plug in and have the software ready to go (except wifi connection). The wifi setup can be handled with the app via Bluetooth (where MMM-Remote-Control wouldn’t work yet).

I added the MMM-Remote-Control interface just for fun to the app (and because its faster, because BLE ist quite limited in bandwith). I will probably add an adapter for the MMM-Mobile module too, so users have as much options as possible, for communicating with the mirror.
And maybe someone comes up with even another option for connecting, that doesn’t rely on a wifi connection.

[card:aschulz90/ble_app_interface]

This module publishes BLE services, that can be used to:

add/remove modules edit modules edit general config values execute certain actions, like reboot, refresh, etc. (thanks to mmm-remote-control for this) connect to a wifi network

This allows every BLE-enabled device to connect to the mirror and communicate with it. Information on the published services and characteristics, and how to use them, can be found on the GitHub page.

For Installation/Usage/Requirements see the GitHub page.
Please read the installation instruction carefully!

I have tested the BLE functionality with an RaspberryPi 2 and a generic USB Bluetooth adapter (without needing any special configuration). So the module should work on a RaspberryPi 3 aswell.

I am currently developing an Android app, that uses this module and can be found here.

NO LONGER needed as the MM2 update allows you to turn this on in the default weather module now!!! :)