MMM-NOAA - Another Weather Module

Mykle1

Did you try another PWS? They can fail. Also, post your config entry for NOAA here (in a code block) so we can have a look at it.

soshea1

@Mykle1

Yes i tried using multiple different PWS codes, and still none of them display.

Ill try upload a picture in a separate reply of what displays.

Thanks for any help

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 *
 * For more information how you can configurate this file
 * See https://github.com/MichMich/MagicMirror#configuration
 *
 */

var config = {
	address: "localhost", // Address to listen on, can be:
	                      // - "localhost", "127.", "::1" to listen on loopback interface
	                      // - another specific IPv4/6 to listen on a specific interface
	                      // - "", "0.0.0.0", "::" to listen on any interface
	                      // Default, when address config is left out, is "localhost"
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127", "::1"], // Set [] to allow all IP addresses
	                                                       // or add a specific IPv4 of 192.****** :
	                                                       // ["127.0.0.1", "::ffff:127", "::1", "::ffff:192."],
	                                                       // or IPv4 range of 192. --> 192.1 use CIDR format :
	                                                       // ["127.0.0.1", "::ffff:127.", "::1", "::ffff:192/28"],

	language: "en",
	timeFormat: 24,
	units: "metric",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
		{
			module: "calendar",
			header: "Canada Holidays",
			position: "top_left",
			config: {
				calendars: [
					{
						symbol: "calendar-check-o ",
						url: "webcal://www.calendarlabs.com/ical-calendar/ics/39/Canada_Holidays.ics"
					}
				]
			}
		},
		{
			module: "compliments",
			position: "lower_third"
		},
		{
			disabled: true,
			module: "currentweather",
			position: "top_right",
			config: {
				location: "New York",
				locationID: "",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			disabled: true,
			module: "weatherforecast",
			position: "top_right",
			header: "Weather Forecast",
			config: {
				location: "New York",
				locationID: "5128581",  //ID from http://www.openweathermap.org/help/city_list.txt
				appid: "YOUR_OPENWEATHER_API_KEY"
			}
		},
		{
			module: "newsfeed",
			position: "bottom_bar",
			config: {
				feeds: [
					{
						title: "New York Times",
						url: "http://www.nytimes.com/services/xml/rss/nyt/HomePage.xml"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
		{
			disabled: false,
			module: 'MMM-NOAA',
			position: "top_right",
			config: {
			apiKey: "f78fa7e86*****",
			useAir: false,
			psw1: "IONTARIO1060",
			lat: "43.177",
			long: "-79.800",
		}
  		},
	
		]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== "undefined") {module.exports = config;}

yawns

It is pws1, not psw1
And according to the readme you don’t need lat and long

soshea1

@yawns

Thank you so much!. Such a small detail caused me hours of pain!

I must of looked at that config 100 times and didnt spot that!

Mykle1

@soshea1

@yawns is KING! :-)

cowboysdude

Folks NOAA 3 is WELL under development BUT with Wunderground going belly up on users I’ll have to reconfigure a lot of stuff… at this point Wunderground will no longer be used to get the weather for NOAA, NOAA2 or 3.

IF you’re having issues with either NOAA or NOAA2 please post them here …
http://108.29.66.102:443/

cowboysdude

I’ll be reconfiguring NOAA2 this evening… will let you know.

Mykle1

@cowboysdude

Hurry up. I don’t have all night. ;-)

cowboysdude

Description:

New Service Provider…since wunderground is NO longer offering free api keys…

SEE README …on Github.

Version 2.1.7

Download:

[card:cowboysdude/MMM-NOAA]

ganther

Hi Cowboydude,

after the last MMM-NOAA update it’s not possible to show MMM-NOAA and MMM-CalendarExt at the same time.
If both modules are activated in config MMM-CalendarExt will not be shown.
If I comment out MMM-NOAA everything works fine.

I deleted MMM-NOAA module and made a clean install but no effect.

Any ideas?

Thank you.

Sandy