Hello guys.
I just started with my MM2 Project. Now i want to know if it is possible to include a module where i can use the functionality of the Awox Smart Control App. There are some Repos on Github but i don´t know how to bring these into a module to use on the MM.

I´m using an RPi3 B+ so i got a BT module.

I´m open for suggestions.

Ty and best regards

Re: MMM-Powerwall

I can’t seem to get the graphs to display - it’s pulling the correct numerical values but no pretty graphs like yours. What am I missing? - TIA

Hi, thank you for the module but for me is not working well. The module show date and hours correct but the info from blynk says “OFFLINE”. The blynk app is working on my phone and the authToken is correct . I use wemos d1 mini and bme280

@Bugsounet - Yeah would be but i think that will be another project for another day. I haven’t constructed the physical mirror yet so i’, just trying to set up some modules and stuff using my laptop as a display through vnc first. When doing the construction i’ll be adding a USB mic, radar sensor etc so this will give me some extra things to play with :)

MMM-Freebox

MMM-Freebox est un module pour le projet MagicMirror par Michael Teeuw.

Il permet d’afficher, sur votre Mirroir, divers informations de votre Freebox en temps réél.

Plusieurs modules sont disponibles et permet l’affichage suivant:

Bande Passante. Adresse IP. Appareils connectés Débit utilisé (total et/ou par appareil) Ping de votre mirroir vers google.fr (ou autre) Appels manqués. Utilisateurs connectés en VPN Type de connexion utilisé par les appareils … Update v1.4.0 (10/08/2020) Affichage de la chaîne regardé avec son programme en cours Screenshot

Installation Notes: Les essais ont été effectué avec des Freebox Mini 4k, Freebox Revolution et Freebox Devialet. Je n’ai pas encore de retour sur la Freebox One et POP je pense que cela devrait fonctionner également car toutes les box Free utilisent la même API Ne fonctionne pas avec les Freebox Crystal et antérieur (API différante) En cas de souci, ne pas hésiter a ouvrir une ISSUE player: {} Je ne sais pas si les Freebox mini4k ou pop retournent les informations (elles sont sous AndroidTV) ServerIP: depuis le dernier firmware Free ne permet plus l’affichage des logo des chaines…

cela fonctionne en http uniquement avec l’adresse ip du FreeboxServer ou l’ip de mafreebox.free.fr

par default j’ai mis l’ip de mafreebox.free.fr Testé sous Freebox Révolution

@emrah_asl also, vnc vs mm. mm implements its own network security . so vnc connection has nothing to do with mm connection

Hello Seniors,

MMM-Carousel , MMM-Carousel 2 and https://github.com/shbatm/MMM-KeyBindings

I set following lines but left and right keypads are not working, do you need addtaional setup for enable keypads,

I was thinking to setup joysitck for my mirror.

{ module: 'MMM-KeyBindings', config: { enableKeyboard: true } }, { module: 'MMM-Carousel', position: 'bottom_bar', // Required only for navigation controls config: { transitionInterval: 10000, ignoreModules: [], mode: 'slides', showPageIndicators: true, showPageControls: true, slides: [ ["calendar","MMM-KeyBindings"], ["newsfeed","MMM-KeyBindings"], ["MMM-KeyBindings"] ], keyBindingsMode: "DEFAULT", keyBindings: { NextSlide: "ArrowRight", PrevSlide: "ArrowLeft", Slide0: "Home" } } },

@cowboysdude sorry for being late, but thanks for willing to help. :D

@sdetweil going to check right now thanks.

Hey guys- are you still maintaining this?

good start of coding ! :clapping_hands:

now try to code on notificationReceived to change source on demand ;) :thinking_face:

any voice here ? :)

Re: [MMM-JaST] Just another Stock Ticker

This works great! Thank you for creating this. I’m kind of new to this so have few enhancements for your consideration.

Is there a way to wrap the ticker so as the last stock is shown on the scrolling left (horizontal), the first stock follows? It seems now, the scroll gets wiped and starts over again. Is there a way to show the change in currency in addition to the % change? or even display the volume of the stock? It seems Alpha vantage doesn’t have market benchmark data (Dow, NASDAQ, S&P). Is there an alternate source like Yahoo for the market data to be displayed along side the stock symbols?

If I had the knowhow to do this on my own, wish I can hack out the code but not quite there…
Thank you so much!
Ki

mouahahah ;)

I think it will not be long too me!

@siggmur eaddr in use means something is still using that port 8080,

pm2’s job is to start at boot, so you can have more than one running

keep stopping

check w
ps -ef | grep node |grep -v grep

kill things til u get none.

then

cd ~/MagicMirror npm start

Finalement j’ai installé MMM-WeatherOrNot et c’est vraiment très bien.

https://github.com/mykle1/MMM-WeatherOrNot

UPDATE: Now supporting the PI camera, as well as configuring which camera to use, if not the default

MMM-BlinkCameraIntegration

Interfaces with the Blink home security cameras, displays snapshots and latest videos on the Magic Mirror.

https://github.com/eric-h-st/MMM-BlinkCameraIntegration

Next to be added:

Support periodic snapshots from the cameras Support configuration of cameras and hubs

(Screenshot won’t upload for some odd reason…)

That helps, I should be able to map the two dockers together.

Addition: mmpm log shows this.
No errors in pm2 log.

Excerpt from my config:

var config = { address: "0.0.0.0", // Address to listen on, can be: // - "localhost", "127.0.0.1", "::1" to listen on loopback interface // - another specific IPv4/6 to listen on a specific interface // - "0.0.0.0", "::" to listen on any interface // Default, when address config is left out or empty, is "localhost" port: 8080, ipWhitelist: [], // Set [] to allow all IP addresses

This is mmpm log:

2020/07/29 10:49:53 [error] 735#735: *35 connect() failed (111: Connection refused) while connecting to upstream, client: 192.168.0.100, server: _, request: "GET / HTTP/1.1", upstream: "http://[::1]:7891/", host: "192.168.0.123:7890" 2020/07/29 10:49:53 [error] 735#735: *35 connect() failed (111: Connection refused) while connecting to upstream, client: 192.168.0.100, server: _, request: "GET /favicon.ico HTTP/1.1", upstream: "http://[::1]:7891/favicon.ico", host: "192.168.0.123:7890"

MMM-Nixie-Clock

This is a module for the MagicMirror².

https://github.com/nikobix/MMM-Nixie-Clock

5616b38e-97c5-41ff-b39e-f293e7195dda-image.png

This module will float over other moudules, so you may need to adjust the position in the config file. (Fixed this now)

Using the module - moment.js
Images found at:
© 2007-08 Cestmir Hybl, cestmir.hybl@nustep.net
http://cestmir.freeside.sk/projects/dhtml-nixie-display
and
https://github.com/McOrts/M5StickC_Nixie_tube_Clock

To use this module, add the following configuration block to the modules array in the config/config.js file:

var config = { modules: [ { module: 'MMM-Nixie-Clock', position:"top_left", size: 75, ** CSS automatically sizes the image size - 10% } ] }